Content |
Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.
Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.
Features - Super-high resolution USB to optical/DSD converter
- Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
- Signal-to-noise ratio: 112dB
- Extremely low distortion: THD+N 0.003%
- Digital (optical) and analog outputs
- Direct Stream Digital rates: DSD64, DSD128
- Dual headphone outputs: ¼-inch, 1/8-inch
- Compatible with headphones from 16–600 ohms
- USB-bus-powered or optional AC adapter
Requirements - Minimum System Requirements:
- M-Audio Windows Driver
- Windows 7
- OSx 10.9
|
Micro DAC is a USB digital-to-analog (DAC) converter with two outputs, one analog and one digital (optical). Itʼs ideal for converting the audio from your computer into a high-quality analog format without needing to carry anything larger than a flash drive. The sound quality available from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired. Micro DAC delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unitʼs headphone jack.
Use the 1/8-inch analog output to connect any headphones, and enjoy vibrant high-fidelity sound. There is a gain switch that boosts the signal level, so you can drive even high-impedance headphones to a robust loudness level. And since virtually all high-quality audio equipment has an optical digital input, Micro DACʼs optical digital output is perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.
Micro DAC has a rugged aluminum housing and is USB-bus-powered. Getting professional-quality audio from your computer couldnʼt be easier!
- Aluminum housing for ruggedness while traveling
- 1/8" headphone output
- 1/8" coaxial digital output
- Gain switch for high-impedance headphones, to easily drive any model
- Slim, small design for portability
- Professional audio quality
- 16-bit/48kHz audio conversion over a USB connection
- USB-bus-powered
Requirements - Windows 7 - Windows 10 Compatible
- OSx 10.7.5 - 10.11 Compatible
|
Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).
The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.
Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.
Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.
The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.
There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.
The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.
Standby Consumption in W | 0.3 |
Maximum Dimensions (W x D x H) in inches | 12.0 x 13.9 x 4.2 |
| The Audioengine D3 Premium 24-bit DAC (digital-toanalog converter) allows you to bypass your
computer's headphone output and send music
directly through a USB port for noticeably improved
fidelity and a higher output.
Portable USB audio converter for Mac or PC
Stream bit-perfect native 24/96 HD audio
High-performance headphone amp included
Plug-and-play, no drivers or software to install
Connect headphones or any music system
Easily drives low impedance headphones
Computer OS volume control
Asynchronous data transfer with dual master clocks
HD indicator for sample rates above 48K
Metal injection molded (MIM) aluminum case |
ARTSOUND VD-238 VGA Video and RCA Audio Converter TO HDMI
This compact VGA with Audio to HDMI Converter enables you to convert a VGA video signal and separate RCA audio signal to an HDMI output, and in this way connect your VGA/RCA sources to an HDMI display for a full audiovisual experience.
On output, the converter supports resolutions up to Full HD 1080p and computer resolutions up to 1600 x 1200. It converts the input resolution to the closest output resolution.
Key Features
- Convert VGA and L/R RCA signals to an HDMI output
- VGA and L/R RCA inputs
- HDMI output
- Embeds L/R RCA audio into the HDMI output
- Supports output resolutions up to 1080p and 1600 x 1200
- Supports data rates up to 6.75 Gbps
Input |
1 x VGA 1 x L/R RCA |
Output |
1 x HDMI 1.2a |
Input Video Signal |
0.5 - 1.0 V p-p |
Input DDC Signal |
5 V p-p (TTL) |
Supported Input Resolutions |
640 x 480 at 60 / 75 Hz 800 x 600 60 / 75 Hz 1024 x 768 60 / 75 Hz 1280 x 720 60 / 75 Hz 1280 x 768 60 / 75 Hz 1280 x 960 60 / 75 Hz 1280 x 1024 60 / 75 Hz |
Supported Output Resolutions |
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Computer Resolutions: up to 1600 x 1200 (if available on the HDMI display)
*The input resolution is automatically converted to the closest output resolution. |
Frequency |
Up to 165 MHz |
Video Amplifier Bandwidth |
1.65 Gbps |
Power Supply |
5 VDC, 1 A |
Power Consumption |
5 W |
Operating Temperature |
32 to 158°F (0 to 70°C) |
Storage Temperature |
14 to 176°F (-10 to 80°C) |
Operating Humidity |
10 to 85% RH (no condensation) |
Storage Humidity |
5 to 95% RH (no condensation) |
Dimensions |
3.5 x 1 x 2.7" (8.9 x 2.5 x 6.9 cm) |
Weight |
0.24 lb (109 g) |
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
|
Reviews
There are no reviews yet.