EVE AUDIO TS108 ACTIVE 8” SUBWOOFER 150W RMS

699.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
8″ Subwoofer Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not […]

 

Read more

8″ Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60….140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS108 model features a very efficient 150W PWM amplifier that drives a proprietary 8″ woofer. This guarantees a frequency response of down to 33Hz (on the lower end), up to 300Hz, for a maximum output power of 105 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer’s volume but also the complete stereo system’s volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS108
Description Subwoofer
Dimensions (WxHxD) [mm] 280 x 415 x 365
Dimensions (WxHxD) [“] 11.02 x 16.34 x 14.37
Free-field frequency range (-3dB) 33Hz – 300Hz
Woofer 195mm/8“
Maximum SPL @ 1m 105dB
Number of amplifiers 1
Total short-term output power 150W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. – +6dB
Subwoofer volume -inf. – +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 170VA
Misc.
Weight kg/lb. 11.5 / 25.3
Weight 11.50 kg

Reviews

There are no reviews yet.

Be the first to review “EVE AUDIO TS108 ACTIVE 8” SUBWOOFER 150W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

EVE AUDIO TS108 ACTIVE 8'' SUBWOOFER 150W RMS removeFOCAL Sub6 ACTIVE STUDIO SUB MONITOR 300W removeKALI AUDIO WS-12 SUBWOOFER ACTIVE 1000W removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removeGENELEC 7071A ACTIVE SUBWOOFER removeYAMAHA SW-10 Studio Monitor remove
NameEVE AUDIO TS108 ACTIVE 8'' SUBWOOFER 150W RMS removeFOCAL Sub6 ACTIVE STUDIO SUB MONITOR 300W removeKALI AUDIO WS-12 SUBWOOFER ACTIVE 1000W removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removeGENELEC 7071A ACTIVE SUBWOOFER removeYAMAHA SW-10 Studio Monitor remove
Image
SKUTS108Sub6WS12EV/EM/0000107071AH000.00083
Rating
Price 699.00 incl. GR VAT 1,295.00 incl. GR VAT 679.00 incl. GR VAT 1,205.00 incl. GR VAT 3,475.03 incl. GR VAT 899.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

8" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS108 model features a very efficient 150W PWM amplifier that drives a proprietary 8" woofer. This guarantees a frequency response of down to 33Hz (on the lower end), up to 300Hz, for a maximum output power of 105 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS108
Description Subwoofer
Dimensions (WxHxD) [mm] 280 x 415 x 365
Dimensions (WxHxD) [“] 11.02 x 16.34 x 14.37
Free-field frequency range (-3dB) 33Hz - 300Hz
Woofer 195mm/8“
Maximum SPL @ 1m 105dB
Number of amplifiers 1
Total short-term output power 150W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 170VA
Misc.
Weight kg/lb. 11.5 / 25.3

The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

 

Specifications
Frequency response : 30Hz - 250Hz
Maximum SPL : 116dB SPL (peak @ 1m)

Input :

Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable

Outputs (towards speakers) : Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug

Amplification :

350W rms, BASH® technology

Signal internal treatment :

Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave

Electric supply :

Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass

warning light : Power on LED, Subwoofer switch (mute), Released high-pass

Electric supply :

Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire

Subwoofer : 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body.

Dimensions (HxWxD) : 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm)
Weight : 50.7lb (23kg)

 

The WS-12 is a 1000W powered subwoofer for the studio and the stage. With frequency extension down to 23 Hz and 123 dB max SPL, it provides authoritative low end in any setting.

Power. Depth. Adaptability.

The WS-12 Subwoofer is the most powerful studio subwoofer available under $1000. It is made to be used with any near- or mid-field studio monitors, as well as with small portable PA systems in a live setting.

One of the key design specifications for the WS-12 is that it be capable of providing bass management in a 5.1 system where all of the full-range speakers are Kali IN-8s. As such, the WS-12 is powered by a 1000W power amplifier mated to a high-excursion 12-Inch driver.

This much power also makes the WS-12 a capable live subwoofer. Its enclosure is 18mm plywood and it has handles for easy carrying. Kali’s team made sure that it will fit in small passenger cars, so you can take it with you even when you’re calling a ride to get to your gig!

All this power is controlled by a robust, user-friendly DSP section that let you dial in the exact settings you need for your system. Whether you’re using it with a pair of LP-6s, as bass management in a 5.1 system, or on stage with a PA, it’s easy to configure the WS-12 to get exactly what you need.

The WS-12 was designed as a companion subwoofer for Kali’s LP- and IN-Series Studio monitors.

When used with a pair of Kali monitors, the subwoofer’s crossover and gain settings can be configured to precisely match those of the full-range monitors. With these settings dialed in, set the subwoofer between the speakers, and turn all speakers’ volume knob either to noon or all the way up. The subwoofer’s level will be exactly where it needs to in order to match the full- range speakers.

The WS-12 can be used for bass management in systems as large as 5.1 with any Kali monitors.

Convenient settings allow the use of an external crossover, and the WS-12 can even be configured as a dedicated Low Frequency Effects channel.
Powered: Yes
Amp Class: D
Continuous Power: 500W
Peak Power: 1000W
Driver Size: 12 Inches
Freq Response: (-10 dB): 23Hz - 160 Hz
Freq Response: (+/-3 dB): 30Hz - 160 Hz
Crossover: Selectable; See User\'s Manual
Max SPL: 123dB
Unbalanced Inputs: Stereo RCA
Balanced Inputs: Stereo TRS/XLR Combi Jack
Balanced Outputs: Stereo XLR
Other Inputs/Outputs: 1/4-Inch Footswitch Input
Enclosure: 18mm Plywood
Height: 19 Inches (48.3cm)
Depth: 17 Inches (43.2cm)
Width: 16 Inches (40.7cm)
Weight: 63 Lbs (29kg)

12" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Frequency response curve

Product TS112
Description Subwoofer
Dimensions (WxHxD) [mm] 390 x 560 x 508
Dimensions (WxHxD) [“] 15.35 x 22.05 x 20
Free-field frequency range (-3dB) 24Hz - 300Hz
Woofer 300mm/12“
Maximum SPL @ 1m 112dB
Number of amplifiers 1
Total short-term output power 400W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 410VA
Misc.
Weight kg/lb. 25.5 / 56.2

Genelec 7071A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.

118 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
2 x 12“
500 W
H x W x D  755 x 803 x 490 mm
81 Kg (178 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

Weight11.50 kg23.00 kg30.00 kg25.50 kg81.00 kg26.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.50 kg
Weight 23.00 kg
Weight 30.00 kg
Weight 25.50 kg
Weight 81.00 kg
Weight 26.50 kg