EVE AUDIO TS110 ACTIVE 10” SUBWOOFER 250W RMS

895.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
10″ Subwoofer Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not […]

 

Read more

10″ Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60….140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10″ woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.

The included remote control will let you adjust not only the subwoofer’s volume but also the complete stereo system’s volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS110
Description Subwoofer
Dimensions (WxHxD) [mm] 330 x 485 x 430
Dimensions (WxHxD) [“] 12.99 x 19.09 x 16.93
Free-field frequency range (-3dB) 28Hz – 300Hz
Woofer 250mm/10“
Maximum SPL @ 1m 108dB
Number of amplifiers 1
Total short-term output power 250W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. – +6dB
Subwoofer volume -inf. – +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 250VA
Misc.
Weight kg/lb. 19.6 / 43.2
Weight 19.60 kg

Reviews

There are no reviews yet.

Be the first to review “EVE AUDIO TS110 ACTIVE 10” SUBWOOFER 250W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

EVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- removeGENELEC 7070A ACTIVE SUBWOOFER removeJBL LSR 310S Bi-Amplified Powered Studio Monitor Sub removeGENELEC 7270A ACTIVE DSP SUBWOOFER removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (BLACK) remove
NameEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- removeGENELEC 7070A ACTIVE SUBWOOFER removeJBL LSR 310S Bi-Amplified Powered Studio Monitor Sub removeGENELEC 7270A ACTIVE DSP SUBWOOFER removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (BLACK) remove
Image
SKUTS110TURBO 10S YELLOW7070ALSR 310S7270AGibbon 10B
Rating
Price 895.00 incl. GR VAT711.75 incl. GR VAT 2,440.67 incl. GR VAT 522.99 incl. GR VAT 3,159.48 incl. GR VAT465.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

10" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS110
Description Subwoofer
Dimensions (WxHxD) [mm] 330 x 485 x 430
Dimensions (WxHxD) [“] 12.99 x 19.09 x 16.93
Free-field frequency range (-3dB) 28Hz - 300Hz
Woofer 250mm/10“
Maximum SPL @ 1m 108dB
Number of amplifiers 1
Total short-term output power 250W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 250VA
Misc.
Weight kg/lb. 19.6 / 43.2

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

Genelec 7070A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.

112 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
12" Active
250 W
H x W x D  625 x 555 x 490 mm
50 Kg (110 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

Beef up your studio's low-end response

The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113dB.

A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.

JBL LSR 310S Features:
  • 200W Class-D Amplifier
  • 113dB Peak Output
  • 10" Speaker
  • Slip Stream Bass Port
  • Balanced XLR Input
  • Extended Low Frequency Effects
  • 3 Selectable Crossover Settings

 

Genelec 7270A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.

With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7270A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio.

The main channels crossover frequency can be adjusted between 50-100 Hz. The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.

The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7270A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.

The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.

This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.

112 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
12“
250 W
H x W x D  625 x 555 x 490 mm
51 Kg (112 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

Product details

Woofer:10-inch black Glass-Composite Cone
Frequency response:20Hz - 200Hz
Crossover frequency:50Hz - 130Hz adjustable
Amplifier Power:300W
S/N Ratio (A weighted):>95dB
THD + N @ Rated Power:  0.08%
Inputs:2x XLR, 2x TRS, 2x RCA Connectors
Outputs:2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors
Input Impedance:20 kOhm balanced, 10 kOhm unbalanced
Phase reverse:0 / 180° switch
Ground Lift switch:On / Off
Bypass Footswitch:On / Off
Available colors:Red, Black
Net weight:17.6kg / 38.7lb
Net Dimensions: L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in
Weight19.60 kg22.40 kg50.00 kg15.60 kg51.00 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.60 kg
Weight 22.40 kg
Weight 50.00 kg
Weight 15.60 kg
Weight 51.00 kg
Weight 8.00 kg