ifi Audio xCAN Portable Headphone Amplifier

No longer available!

349.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go. The mother of all amplifiers The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound. Using a high-end DAP that has an adequate onboard […]

 

Read more

The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go.

The mother of all amplifiers

The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound.

Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice?

Just add the xCAN to drive bigger and better headphones and boost your tunes.

Blinding Bluetooth

The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic.

Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side.

Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory.

Wicked wiring

Connect via a digital SPDIF or via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.

On headphones this means lower distortion, less interference and less crosstalk.

And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs.

A pure power house

The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones.

And we added our signature sonic extras as well.

3D+® opens up your music to give you the spaciousness of a live-concert atmosphere.

The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies.

Clever. Curvy.

The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey!

And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady.

Specifications

Inputs Wireless ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
Wired 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
*ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.
No USB audio input
Max Output S-Balanced > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
Balanced > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm)
THD & N S-Balanced < 0.005% (@ 100 mW/1.26V 16 Ohm)
Balanced < 0.006% (@ 360 mW/2.4V 16 Ohm)
SNR S-Balanced > 121dBA (@ 3.8V)
Balanced >120dBA (@ 7.6V)
Recommended HP Impedance 16~600 Ohm
Output impedance S-Balanced
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ifi Audio xCAN Portable Headphone Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

ifi Audio xCAN Portable Headphone Amplifier removeLD Systems HPA 6 - 19" Headphone Amplifier 6-channel removeSOUND DEVICES HX-3 Portable Headphone Amplifier removePALMER AUDIO MONICON L - Passive Monitor Controller removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS removeAPOGEE GROOVE HEADPHONES AMP , USB DAC remove
Nameifi Audio xCAN Portable Headphone Amplifier removeLD Systems HPA 6 - 19" Headphone Amplifier 6-channel removeSOUND DEVICES HX-3 Portable Headphone Amplifier removePALMER AUDIO MONICON L - Passive Monitor Controller removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS removeAPOGEE GROOVE HEADPHONES AMP , USB DAC remove
Image
SKUxCANLDHPA6HX-3PMONICONLLDHPA4GROOVE
Rating
Price349.00 incl. GR VAT 212.03 incl. GR VAT 491.97 incl. GR VAT 168.43 incl. GR VAT 49.00 incl. GR VAT 271.56 incl. GR VAT
Stock

Out of stock

Only 2 left in stock (can be backordered)

Available on backorder

Only 2 left in stock (can be backordered)

In stock (can be backordered)

Available on backorder

AvailabilityOut of stockOnly 2 left in stock (can be backordered)Available on backorderOnly 2 left in stock (can be backordered)In stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go. The mother of all amplifiers The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound. Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice? Just add the xCAN to drive bigger and better headphones and boost your tunes. Blinding Bluetooth The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic. Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side. Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory. Wicked wiring Connect via a digital SPDIF or via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one. On headphones this means lower distortion, less interference and less crosstalk. And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs. A pure power house The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones. And we added our signature sonic extras as well. 3D+® opens up your music to give you the spaciousness of a live-concert atmosphere. The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies. Clever. Curvy. The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey! And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady. Specifications
Inputs Wireless ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
Wired 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS) *ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources. No USB audio input
Max Output S-Balanced > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
Balanced > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm)
THD & N S-Balanced < 0.005% (@ 100 mW/1.26V 16 Ohm)
Balanced < 0.006% (@ 360 mW/2.4V 16 Ohm)
SNR S-Balanced > 121dBA (@ 3.8V)
Balanced >120dBA (@ 7.6V)
Recommended HP Impedance 16~600 Ohm
Output impedance S-Balanced
LDHPA6 6-Channel Rackmount Headphone Amplifier The LD Systems HPA 6 is a highly flexible 1U 19" rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications. Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting  and a 6.3 mm TRS Aux input with Main/Aux balance control  for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones. The HPA 6\'s main section features a master level control with eight-segment LED metering  and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.
  • Type: 6-channel
  • Inputs: Main Input (Stereo), Direct In (Stereo), 6 x Aux In (Stereo)
  • Input Connections: XLR and 6.3 mm jack L&R (Main Input, balanced), 6.3 mm stereo jack (Direct In), 6.3 mm stereo jack (Aux In)
  • Input Impedance: 13 kOhm
  • Line Outputs: Main Output (stereo, balanced)
  • Line Output Connectors: XLR and 6.3 mm jack L&R
  • Headphone Outputs: 6 x 3
  • Headphone Output Connectors: 6.3 mm stereo jack
  • Power Output: 6 x 125 mW
  • Minimal Connected Impedance per Channel: 8 ohms
  • Frequency Response: 20 Hz - 20.000 Hz
  • Controls: Main Input Level, 6 x Input Mix Main/Aux, 6 x Headphone Level, 6 x Mono Switch, 6 x Mute L&R, Power
  • Indicators: Main Input/Direct In Level Meter (8-segment LED chain), 6 x channel level meter (4-segment LED chain), 6 x mono LED, 6 x Mute L&R LEDs, Power LED
  • Power Supply: IEC power socket
  • Operating Voltage: 220 - 240 V AC, 50 - 60 Hz / 110 - 120 V AC, 50 - 60 Hz
  • Power Consumption: 40 W
  • Cabinet Material: metal
  • Cabinet Surface: painted
  • Width: 483 mm
  • Height: 44 mm
  • Depth: 217 mm
  • Accessories (included): power cord

The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.

HX-3 Key Features

Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.

HX-3 Key Features List
  • Three isolated headphone outputs with individual volume controls.
  • 125 dB dynamic range with flat frequency response.
  • Durable 1/4-inch connectors, panel mounted for strength.
  • Stereo or mono monitoring.
  • Peak LED indicates headphone overload.
  • Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
  • Loop Output to connect additional HX-3's in series.
  • All-metal connectors solidly mounted to the chassis for durability and RF immunity.
  • Free from "Pin-1" grounding problems.
  • Internal battery-power for up to 18 hours from two AA alkaline batteries.
  • Chassis-isolated 5 to 18 VDC input for easy external DC powering.
  • Power LED indicates low battery power.
  • High strength, extruded aluminum chassis with protective metal end panels.

 

  • All-passive volume control circuit
  • Stereo and AUX inputs
  • Dual outputs
  • Additional mono output
  • Balanced and unbalanced connection
  • Integrated high quality headphone amplifier
  • Mono, mute and PFL switches
  • Stereo volume, AUX and headphone level controls
  • Elegant design with solid wood side panels
  • Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply. Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation. Product type Other Studio and Recording Equipment
Channels 2
Inputs 2
Input connectors 3.5 mm TRS , RCA , XLR
Input type balanced/unbalanced (depending on TS/TRS connection)
Max. input level 20 dBu
Input impedance (balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs 3
Output connectors XLR
Output type balanced/unbalanced (depending on TS/TRS connection)
Max. output level 20 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 40000 Hz
THD 0.001 %
Max. attenuation (Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material sheet steel , wood
Cabinet surface Powder coated
Width 218 mm
Height 77 mm
Depth 100 mm
Weight 1,14 kg
LD Sytems HPA 4 - a compact and powerful headphone amplifier The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio. Specifications Product type Headphone Amp:
Inputs 2
Input connectors 6.3 mm TRS , RCA
Input impedance 1 k Ohm(s)
Outputs 2
Output connectors 6.3 mm Jack
Power output 4 x 100 mW
Minimum connected impedance 10 Ohm(s)
Frequency response 20 - 20.000 Hz
Controls 4 x headphone volume , Mono/stereo switch
Indicators Power
Operating voltage External Power Supply
Operating voltage 24 V DC
Cabinet material metal
Cabinet surface painted
Width 94 mm
Height 48 mm
Depth 82 mm
Weight 0,27 kg
Accessories (included) power supply

Info

Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced

Weight0.50 kg3.00 kg2.00 kg1.14 kg0.50 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 3.00 kg
Weight 2.00 kg
Weight 1.14 kg
Weight 0.50 kg
Weight 1.00 kg