| Content | The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go.
The mother of all amplifiers
The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound.
Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice?
Just add the xCAN to drive bigger and better headphones and boost your tunes.
Blinding Bluetooth
The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic.
Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side.
Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory.
Wicked wiring
Connect via a digital SPDIF or via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.
On headphones this means lower distortion, less interference and less crosstalk.
And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs.
A pure power house
The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones.
And we added our signature sonic extras as well.
3D+® opens up your music to give you the spaciousness of a live-concert atmosphere.
The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies.
Clever. Curvy.
The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey!
And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady.
Specifications
| Inputs |
Wireless |
ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC) |
| Wired |
3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
*ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.
No USB audio input |
| Max Output |
S-Balanced |
> 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm |
|
Balanced |
> 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm) |
| THD & N |
S-Balanced |
< 0.005% (@ 100 mW/1.26V 16 Ohm) |
| Balanced |
< 0.006% (@ 360 mW/2.4V 16 Ohm) |
| SNR |
S-Balanced |
> 121dBA (@ 3.8V) |
| Balanced |
>120dBA (@ 7.6V) |
| Recommended HP Impedance |
16~600 Ohm |
| Output impedance |
S-Balanced |
|
|
INPUT: 1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS: 5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB): 25kHz.
CONTROL: 5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE: -60dB to +10dB.
S/N RATIO: 78dB.
THD: 0.08% @100mW.
POWER SOURCE: 12V DC, 370mA nom, 1A max.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT: 0.68kg (1.5lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19" rack adapter.
|
- Distributes the signal of 1 audio source to 4 sets of headphones
- 4 channels with separate level controls and headphone outputs
- All connections via 6.3 mm (1/4“) jacks
- Operation via supplied power unit
| The new HP4 from PreSonus answers the need for a headphone distribution
amplifier with professional specifications in a small package at an affordable
price. The HP4 features four discrete headphone outputs on the front panel
each with its own volume potentiometer and 150mW of amplification per channel.
The HP4 also features adjustment over control room monitors with a separate
volume control, monitor mute switch and mono switch giving you an extremely
powerful monitoring solution at an amazingly low price.
Features
? Four High Power Headphone Outputs
? Ultra loud (150mW per channel)
? Ultra quiet operation
? Musical Wide Dynamic Range
? Control Room Monitor Outputs with Level Control
? Mono or Stereo Operation
? Monitor Mute Switch
? Daisy Chain an Infinite Number of Units
? Compact package
Technical Specifications
Input
TRS Impedance 10K Ohms
Panel Controls
Headphone Level 1 to 12
Monitor / Feed Output -80dB to +10dB
Mono Switch
Monitor / Feed Mute
Power Supply
Type Linear
Input 16VAC/1000mA
Output
TRS Balanced 51 Ohms Impedance
Performance
THD+Noise (Unweighted) 0.002%
Noise Floor -98dB
Signal To Noise >95dB
Power Supply Rejection >98dB
Power 16 Watts
Physical
Weight 5lbs./ 2.3 kg.
Dimensions 5.5 x 5.5 x 1.75
Mounting Max Rack and Universal Rack Tray
Chassis Steel
Panel Brushed Aluminum
Sides Cast Aluminum |
Overview
Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.
Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability |
The amPlug Twin rolls back the years to capture the sound of the legendary clean American dual speaker combo tube amp. Noted for its sparkling and sustained clean sound, this amp has been is widely used in many genres - rock, blues, jazz, country, and more. Raising the gain provides a powerful American tube overdrive sound. A stereo chorus effect is built into the amPlug Twin, adding natural spaciousness and depth to the sound. As you play these sounds, you're sure to forget the passage of time, and lose yourself in the tones loved by musicians in styles such as jazz, country, and blues.
Specifications - Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
- Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
- Power supply: AAA batteries (x 2)
- Battery life: amPlug Twin (FX on):
- With zinc-carbon batteries: approximately 3 hours
- With alkaline batteries: approximately 11 hours
- Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
- Weight: 40 g/1.41 oz. (not including batteries)
- Included items: AAA batteries (X2) (for verifying operation)
|
Reviews
There are no reviews yet.