ifi Audio xCAN Portable Headphone Amplifier

No longer available!

349.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go. The mother of all amplifiers The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound. Using a high-end DAP that has an adequate onboard […]

 

Read more

The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go.

The mother of all amplifiers

The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound.

Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice?

Just add the xCAN to drive bigger and better headphones and boost your tunes.

Blinding Bluetooth

The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic.

Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side.

Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory.

Wicked wiring

Connect via a digital SPDIF or via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.

On headphones this means lower distortion, less interference and less crosstalk.

And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs.

A pure power house

The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones.

And we added our signature sonic extras as well.

3D+® opens up your music to give you the spaciousness of a live-concert atmosphere.

The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies.

Clever. Curvy.

The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey!

And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady.

Specifications

Inputs Wireless ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
Wired 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
*ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.
No USB audio input
Max Output S-Balanced > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
Balanced > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm)
THD & N S-Balanced < 0.005% (@ 100 mW/1.26V 16 Ohm)
Balanced < 0.006% (@ 360 mW/2.4V 16 Ohm)
SNR S-Balanced > 121dBA (@ 3.8V)
Balanced >120dBA (@ 7.6V)
Recommended HP Impedance 16~600 Ohm
Output impedance S-Balanced
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ifi Audio xCAN Portable Headphone Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

ifi Audio xCAN Portable Headphone Amplifier removeOMNITRONIC LH-030 4xHEADPHONE AMPLIFIER removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS removePALMER AUDIO MONICON L - Passive Monitor Controller removePALMER PMONICON Pro MONICON - Passive Monitor Controller removeBEHRINGER P1 POWERPLAY PERSONAL IN-EAR MONITOR AMPLIFIER remove
Nameifi Audio xCAN Portable Headphone Amplifier removeOMNITRONIC LH-030 4xHEADPHONE AMPLIFIER removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS removePALMER AUDIO MONICON L - Passive Monitor Controller removePALMER PMONICON Pro MONICON - Passive Monitor Controller removeBEHRINGER P1 POWERPLAY PERSONAL IN-EAR MONITOR AMPLIFIER remove
Image
SKUxCANLH030LDHPA4PMONICONLPMONICONE006394
Rating
Price349.00 incl. GR VAT 63.24 incl. GR VAT 49.00 incl. GR VAT 168.43 incl. GR VAT 70.00 incl. GR VAT 75.00 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

In stock (can be backordered)

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockOnly 1 left in stock (can be backordered)In stock (can be backordered)Only 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go. The mother of all amplifiers The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound. Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice? Just add the xCAN to drive bigger and better headphones and boost your tunes. Blinding Bluetooth The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic. Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side. Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory. Wicked wiring Connect via a digital SPDIF or via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one. On headphones this means lower distortion, less interference and less crosstalk. And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs. A pure power house The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones. And we added our signature sonic extras as well. 3D+® opens up your music to give you the spaciousness of a live-concert atmosphere. The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies. Clever. Curvy. The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey! And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady. Specifications
Inputs Wireless ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
Wired 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS) *ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources. No USB audio input
Max Output S-Balanced > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
Balanced > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm)
THD & N S-Balanced < 0.005% (@ 100 mW/1.26V 16 Ohm)
Balanced < 0.006% (@ 360 mW/2.4V 16 Ohm)
SNR S-Balanced > 121dBA (@ 3.8V)
Balanced >120dBA (@ 7.6V)
Recommended HP Impedance 16~600 Ohm
Output impedance S-Balanced
  • Distributes the signal of 1 audio source to 4 sets of headphones
  • 4 channels with separate level controls and headphone outputs
  • All connections via 6.3 mm (1/4“) jacks
  • Operation via supplied power unit

LD Sytems HPA 4 - a compact and powerful headphone amplifier The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio. Specifications Product type Headphone Amp:
Inputs 2
Input connectors 6.3 mm TRS , RCA
Input impedance 1 k Ohm(s)
Outputs 2
Output connectors 6.3 mm Jack
Power output 4 x 100 mW
Minimum connected impedance 10 Ohm(s)
Frequency response 20 - 20.000 Hz
Controls 4 x headphone volume , Mono/stereo switch
Indicators Power
Operating voltage External Power Supply
Operating voltage 24 V DC
Cabinet material metal
Cabinet surface painted
Width 94 mm
Height 48 mm
Depth 82 mm
Weight 0,27 kg
Accessories (included) power supply
  • All-passive volume control circuit
  • Stereo and AUX inputs
  • Dual outputs
  • Additional mono output
  • Balanced and unbalanced connection
  • Integrated high quality headphone amplifier
  • Mono, mute and PFL switches
  • Stereo volume, AUX and headphone level controls
  • Elegant design with solid wood side panels
  • Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply. Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation. Product type Other Studio and Recording Equipment
Channels 2
Inputs 2
Input connectors 3.5 mm TRS , RCA , XLR
Input type balanced/unbalanced (depending on TS/TRS connection)
Max. input level 20 dBu
Input impedance (balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs 3
Output connectors XLR
Output type balanced/unbalanced (depending on TS/TRS connection)
Max. output level 20 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 40000 Hz
THD 0.001 %
Max. attenuation (Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material sheet steel , wood
Cabinet surface Powder coated
Width 218 mm
Height 77 mm
Depth 100 mm
Weight 1,14 kg
Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
 
In-ear monitor amplifier for personal monitor applications. High power and \"drummer proof\" headphones output. Dual XLR inputs allow for 2-channel mono or stereo operation. Switchable stereo/mono operation with mix function. Level and Balance/Mix controls. Runs up to 12 hours on a 9 V battery (not included). Integrated current limit protects your ears and headphone. Convenient belt-pack clip included. Mounts easily on a standard mic stand with 5/8” and 3/8” thread.
Brand BEHRINGER
Model P1
Part Number 000-AZM
Mixing Channels 2
Warranty 1 Year
Application Portable PA
Series P series
Weight0.50 kg0.50 kg0.50 kg1.14 kg1.00 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 1.14 kg
Weight 1.00 kg
Weight 0.40 kg