Content |
Our portable DAC and headphone amplifier will improve the sound quality of your music.
Whether you are listening via headphones on the bus or via your system on the sofa, the award-winning xDSD makes your music sound better.
Wireless. Wired.
The xDSD is for people who love to listen — on the go or at home.
You choose wireless via Bluetooth® or wired via USB or SPDIF.
Apple or Android, DAP, games console or TV, just connect the xDSD and enjoy the ultimate audio experience.
Hi-Res. Future-proof.
The xDSD plays high-quality digital audio file formats up to DSD512. Listen to your favourite tracks as they were meant to be.
In love with Hi-Res streaming? Listen to Tidal HiFi and Spotify Premium with ease.
The xDSD is also MQA ready straight out of the box. Use with Tidal Masters on your computer or mobile.
Bluetooth freedom
The convenience of Bluetooth® means your headphones connect to the xDSD, leaving your phone or chosen device wire free. Pop the xDSD in your pocket and it’s business as usual but with much better sound.
The xDSD boasts both aptX™ and AAC™ Bluetooth® for CD-like quality. With standard Bluetooth®, the sound quality drops by 30%, not so with the iFi Bluetooth® implementation. Just a little iFi magic for you!
Superior sonics
With amazing amplification, driven by 500 mW of power, the xDSD handles almost any headphones and it easily partners up with active home speakers.
And, of course, we’ve included our exclusive optional ‘sonic fine-tuning extras’ to add further nuances to your listening.
xBass+® cleans and restores the bass to give you a richer, deeper sound and 3D+® opens up your music to bring a live-concert atmosphere into your living room.
Perfectly balanced
iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.
On headphones this means lower distortion, less interference, and reduce crosstalk.
Smart. Stylish.
The battery lasts up to 10 hours and ‘smart’ tech ensures you enjoy optimum listening time adjusted according to your usage. The xDSD has a separate USB charging socket.
And finally, with its metallic chrome finish and elegant, ergonomic design, based upon the Japanese Zen garden, it puts the ‘x’ back into sexy.
Specifications
USB Input: |
up to PCM768kHz & DSD512 (24.6/22.6MHz) |
SPDIF Coaxial and Optical Input: |
up to 192kHz/24Bit |
Dynamic Range: |
> 113dB (A) |
Volume Control: |
-101dB…0dB in 1dB steps |
Output power: |
> 2.82V/500 mW @ 16 Ohm > 3.7V/270mW @ 50 Ohm > 3.8V/48 mW @ 300 Ohm > 3.8V/24 mW @ 600 Ohm |
Line out Level: |
> 2.1V @ 0dBFS (& 0dB Volume) |
THD &N (1V/16R): |
< 0.005% |
Output Impedance: |
< 1 Ohm |
Battery: |
3.8V/2200mAh |
Dimensions: |
95 (l) x67 (w) x19 (h) mm |
Weight: |
127g (0.28 Ibs) |
Warranty period: |
12 months |
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
| The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS
The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters.
This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier.
Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection.
Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features
Twin Wolfson WM8740 24-bit DACs used in dual differential configuration
New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology
Optional digital preamp mode allowing connection directly to power amp or active speakers
24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
Selectable digital filters - linear phase, minimum phase and steep
Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs
Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz
Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency response 20Hz to 20kHz (±0.1dB)*
THD @ 1Khz 0dBFs | High Grade DAC - Digital / Optical to Analogue Stereo Audio Converter - SPDIF - TOSlink / Coaxial to Stereo Left / Right RCA
This analog digital audio converter is designed for home and professional audio conversion. Converts Toslink coaxial or optical digital audio signals into analog L / R audio signals for connection to an external device such as an amplifier via standard RCA connectors. The main features that allow us to be used even in professional contexts are:
- Supports sampling rate at 32.44.1.48 and 96 KHz.
- 24-bit S / PDIF incoming bit stream on the left and right channels.
- Converts coaxial or Toslink digital audio signals into analog L / R audio.
- Provides transmission of signals free of electromagnetic disturbances.
- Easy to install and easy to use.
Content of the package
- Main unit (analog digital audio converter)
- 5V / DC power supply.
- User Manual
|
Digital to Analogue Converter
Thanks to a Wolfson 24-bit DAC, a 24-bit/96kHz driverless USB Audio 1.0 input and S/PDIF and TosLink digital inputs, the DacMagic 100 takes the sound from your computer, iPod, TV and other digital devices and adds detail, depth and added clarity to give you a true audio experience.
Generally the digital to analogue converter found in typical digital devices is pretty poor and won’t extract the truest quality of audio from your sources. The DacMagic 100 works by taking a direct digital audio signal from your device to bypass its soundcard or DAC. It then digitally processes the audio signal using our custom designed technology, dramatically improving sound quality and reducing distortion. This results in greater detail, sparkling clarity and a deeper scale to all of your audio.
Digital to analogue converter
Wolfson WM8742 24-bit DAC
Frequency response
20Hz to 20kHz (±0.1dB)
THD @ 1Khz 0dBFs
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
|
Reviews
There are no reviews yet.