| Content |
Our portable DAC and headphone amplifier will improve the sound quality of your music.
Whether you are listening via headphones on the bus or via your system on the sofa, the award-winning xDSD makes your music sound better.
Wireless. Wired.
The xDSD is for people who love to listen — on the go or at home.
You choose wireless via Bluetooth® or wired via USB or SPDIF.
Apple or Android, DAP, games console or TV, just connect the xDSD and enjoy the ultimate audio experience.
Hi-Res. Future-proof.
The xDSD plays high-quality digital audio file formats up to DSD512. Listen to your favourite tracks as they were meant to be.
In love with Hi-Res streaming? Listen to Tidal HiFi and Spotify Premium with ease.
The xDSD is also MQA ready straight out of the box. Use with Tidal Masters on your computer or mobile.
Bluetooth freedom
The convenience of Bluetooth® means your headphones connect to the xDSD, leaving your phone or chosen device wire free. Pop the xDSD in your pocket and it’s business as usual but with much better sound.
The xDSD boasts both aptX™ and AAC™ Bluetooth® for CD-like quality. With standard Bluetooth®, the sound quality drops by 30%, not so with the iFi Bluetooth® implementation. Just a little iFi magic for you!
Superior sonics
With amazing amplification, driven by 500 mW of power, the xDSD handles almost any headphones and it easily partners up with active home speakers.
And, of course, we’ve included our exclusive optional ‘sonic fine-tuning extras’ to add further nuances to your listening.
xBass+® cleans and restores the bass to give you a richer, deeper sound and 3D+® opens up your music to bring a live-concert atmosphere into your living room.
Perfectly balanced
iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.
On headphones this means lower distortion, less interference, and reduce crosstalk.
Smart. Stylish.
The battery lasts up to 10 hours and ‘smart’ tech ensures you enjoy optimum listening time adjusted according to your usage. The xDSD has a separate USB charging socket.
And finally, with its metallic chrome finish and elegant, ergonomic design, based upon the Japanese Zen garden, it puts the ‘x’ back into sexy.
Specifications
| USB Input: |
up to PCM768kHz & DSD512 (24.6/22.6MHz) |
| SPDIF Coaxial and Optical Input: |
up to 192kHz/24Bit |
| Dynamic Range: |
> 113dB (A) |
| Volume Control: |
-101dB…0dB in 1dB steps |
| Output power: |
> 2.82V/500 mW @ 16 Ohm
> 3.7V/270mW @ 50 Ohm
> 3.8V/48 mW @ 300 Ohm
> 3.8V/24 mW @ 600 Ohm |
| Line out Level: |
> 2.1V @ 0dBFS (& 0dB Volume) |
| THD &N (1V/16R): |
< 0.005% |
| Output Impedance: |
< 1 Ohm |
| Battery: |
3.8V/2200mAh |
| Dimensions: |
95 (l) x67 (w) x19 (h) mm |
| Weight: |
127g (0.28 Ibs) |
| Warranty period: |
12 months |
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
| Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
| Gain, MM / MC |
40 dB / 60 dB |
| Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
| Max. output |
9,5 V (1 kHz) |
| Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
| THD MM / MC |
<0,01% / <0,05% |
| RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
| A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
| Sampling rates |
32, 44,1 and 48 kHz |
| USB output |
5 pin Mini b Buchse |
| USB signal |
digital serial data protocol USB 1.1 |
| Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
| Input / Line output |
1 pair RCA/Cinch sockets each |
| Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
| Power consumption |
100 mA DC |
| Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
| Weight |
250g without power supply |
|
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied. |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
| Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
| Gain, MM / MC |
40 dB / 60 dB |
| Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
| Max. output |
9,5 V (1 kHz) |
| Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
| THD MM / MC |
<0,01% / <0,05% |
| RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
| A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
| Sampling rates |
32, 44,1 and 48 kHz |
| USB output |
5 pin Mini b Buchse |
| USB signal |
digital serial data protocol USB 1.1 |
| Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
| Input / Line output |
1 pair RCA/Cinch sockets each |
| Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
| Power consumption |
100 mA DC |
| Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
| Weight |
250g without power supply |
|
Reviews
There are no reviews yet.