DAP AUDIO XMC103B XLR 3p. chassis, Black housing Male

2.91 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DAP AUDIO XMC103B XLR 3p. chassis, Black housing Male

 

Read more

DAP AUDIO XMC103B XLR 3p. chassis, Black housing Male

Weight 0.05 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO XMC103B XLR 3p. chassis, Black housing Male”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO XMC103B XLR 3p. chassis, Black housing Male removeNEUTRIK B-NC3MX - XLR male extension 3pin removeNEUTRIK SCL-DUSK PROTECTION COVER LID removeNEUTRIK 3-FXX XLR FEMALE CONNECTOR removeNEUTRIK NC5FX-HD 5 POLE FEMALE HEAVY DUTY CONNECTOR removeNEUTRIK NC3FXS Female with noiseless ON-OFF rotary switch remove
NameDAP AUDIO XMC103B XLR 3p. chassis, Black housing Male removeNEUTRIK B-NC3MX - XLR male extension 3pin removeNEUTRIK SCL-DUSK PROTECTION COVER LID removeNEUTRIK 3-FXX XLR FEMALE CONNECTOR removeNEUTRIK NC5FX-HD 5 POLE FEMALE HEAVY DUTY CONNECTOR removeNEUTRIK NC3FXS Female with noiseless ON-OFF rotary switch remove
ImageNEUTRIK NC3FXS Female with noiseless ON-OFF rotary switch
SKUXMC103B3-MXSCL3-FXXNC5FX-HD3-FXS
Rating
Price2.91 incl. GR VAT 3.79 incl. GR VAT 1.73 incl. GR VAT 4.24 incl. GR VAT 11.57 incl. GR VAT 14.50 incl. GR VAT
Stock

In stock

In stock (can be backordered)

In stock

In stock (can be backordered)

In stock

In stock (can be backordered)

AvailabilityIn stockIn stock (can be backordered)In stockIn stock (can be backordered)In stockIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DAP AUDIO XMC103B XLR 3p. chassis, Black housing Male

B-NE3MX - XLR male extension 3pin

The handy dust protection cover can be used, when no cable connector is mated. The
cover is easy to use and does not block the connectors in the panel below when not in
use.Suitable for Speakon chassis connectors

Neutrik 3FXX Female XLR Cable Connectors / XX Series The next generation of the worldwide accepted standard. Female connector with cage type contacts, “solder stop" for ease soldering and additional ground contact for best contact integrity between chassis and cable connector. Male connector without locking "window“; more stringent housing. Rugged diecast shell in sleek and ergonomic design. NC3FXX 3 pole cable connector, female. Nickel housing and silver contacts. TECHNICAL DATA Electrical Number of contacts: 3 Contact resistance:  3 m Ohm Insulation resistance - initial: > 2 G Ohm - after damp heat test: > 1 G Ohm Dielectric strength: 1500 V dc Rated current: 16 A AWG: 2.5 mm²/14 AWG Capacitance between contacts:  4 pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: 20 N Cable O.D. range: 3.5 mm - 8.0 mm Materials Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating Insert: Polyamide PA 6.6 30% GR (glass reinforced) Contacts: Bronze CuSn8 Contact surface: gal 2 m Ag silver Latch lock: ZnAl4Cu1 Strain-relief clamp: POM Antikink bushing: PA + PU Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20

Female heavy duty, metal boot with rubber jacket, water protected, IP65.

Electrical Specifications:

    * Number of contacts: 5
    * Contact resistance: = 3 m ohm
    * Insulation resistance, initial: > 2 G ohm; after damp
       heat test: > 1 G ohm
    * Dielectric strength: 1500 V dc
    * Rated current: 7.5 A
    * AWG: 2.5 mm²/14 AWG
    * Capacitance between contacts: = 4pF

Mechanical Specifications:

    * Lifetime: >1000 cycles
    * Insertion / withdrawal force: = 20 N
    * Cable O.D. range: 3.5 mm - 8.0 mm

Material Specifications:

    * Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
    * Shell (male): stainless steel and zinc diecasting combined.
    * Insert: PA 6.6 30% GR (glass reinforced)
    * Contacts: CuSn6
    * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
       alloy over 2 ?m Ni
    * Latch lock (female): St3K32
    * Strain-relief clamp: POM
    * Antikink bushing: PUR
    * Sealing jacket: EPDM

Environmental Specifications:

    * Temperature range: -30° C to + 80° C
    * Flammability: UL 94HB
    * Solderability: complies with IEC 68-2-20
    * Protection class: IP 65
    * Compatibility: IEC 61076-2-103 standard

 

XLR Cable Connectors / FXS Type FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch. TECHNICAL DATA Electrical Number of contacts: 3 Contact resistance: ? 3 m Insulation resistance - initial: > 2 G - after damp heat test: > 1 G Dielectric strength: 1500 V dc Rated current: 16 A AWG: 2.5 mm²/14 AWG Capacitance between contacts: ? 4pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: ? 20 N Cable O.D. range: 3.5 mm - 8.0 mm Materials Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating Insert: PA 6.6 30% GR (glass reinforced) Contacts: - female: CuSn6 - male: CuZn39Pb3 Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni Latch lock (female): St3K32 Strain-relief clamp: POM Antikink bushing: PUR Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20 Compatibility: IEC 61076-2-103 standard
Weight0.05 kg0.05 kg0.30 kg0.05 kg0.08 kg0.06 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.05 kg
Weight 0.05 kg
Weight 0.30 kg
Weight 0.05 kg
Weight 0.08 kg
Weight 0.06 kg