DAP AUDIO XMK203BR XLR 3p. Connector male, Black housing

XLR 3p. Connector male, Black housing Red endcap

The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors.

Female heavy duty, metal boot with rubber jacket, water protected, IP65.

Electrical Specifications:

    * Number of contacts: 5
    * Contact resistance: = 3 m ohm
    * Insulation resistance, initial: > 2 G ohm; after damp
       heat test: > 1 G ohm
    * Dielectric strength: 1500 V dc
    * Rated current: 7.5 A
    * AWG: 2.5 mm²/14 AWG
    * Capacitance between contacts: = 4pF

Mechanical Specifications:

    * Lifetime: >1000 cycles
    * Insertion / withdrawal force: = 20 N
    * Cable O.D. range: 3.5 mm - 8.0 mm

Material Specifications:

    * Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
    * Shell (male): stainless steel and zinc diecasting combined.
    * Insert: PA 6.6 30% GR (glass reinforced)
    * Contacts: CuSn6
    * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
       alloy over 2 ?m Ni
    * Latch lock (female): St3K32
    * Strain-relief clamp: POM
    * Antikink bushing: PUR
    * Sealing jacket: EPDM

Environmental Specifications:

    * Temperature range: -30° C to + 80° C
    * Flammability: UL 94HB
    * Solderability: complies with IEC 68-2-20
    * Protection class: IP 65
    * Compatibility: IEC 61076-2-103 standard

Neutrik NC5FD-LX 5-pin XLR Female Connector

Universal D-size metal body XLR panel mount series. UL recognized component.

5 pole female receptacle, solder cups, Nickel housing, silver contacts

 
 
Features & Benefits

Robust "D" metal shell
Standardized D sized 24 mm panel cutout
Solder cups on 3 - 7 pole version

Product
Connector Type XLR
Gender female
Electrical
Capacitance between contacts ??? 7 pF
Contact resistance  ??? 5 m?©
Dielectric strength  1,5 kVdc
Insulation resistance > 2 G?© (initial)
Insulation resistance > 1 G?© (after damp heat test)
Rated current per contact 7,5 A
Rated voltage 50 V
Mechanical
Insertion force ??? 20 N
Withdrawal force ??? 20 N
Lifetime > 1000 mating cycles
Wire size max. 1.0 mm?²
Wire size max. 18 AWG
Wiring Solder contacts
Locking device latch lock
Mounting direction front & rear
Chassis shape D
Material
Contact plating 2 ??m Ag over 2 ??m Ni
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Locking element Steel Ck67
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel
Environmental
Approvals UL
Flammability UL 94 HB
Standard compliance IEC 61076-2-103
Solderability Complies with IEC 68-2-20
Temperature range -30 ?°C to +80 ?°C