| Content |
Features
Built-in analog power amplifiers
Dual analog audio inputs
USB audio input
Hand-finished wood cabinets
Variable audio output
Custom Kevlar woofers and silk tweeters
Power-saving idle mode
Cables included
Works with Mac or PC, no software to install
Designed for desktop use, but will fill a room
Works with
iDevices and all music players
Internet radio and network music systems
Desktop computers, laptops, notebooks
Flat panel TVs with an analog output
CD and DVD players
Videogame consoles
Digital radio and satellite receivers
All products with 1/8" mini-jack or RCA outputs!
What's in the box
A2+ powered (left) speaker
A2+ passive (right) speaker
Speaker wire (16AWG), 2 meters (~6.5 feet)
Power supply
AC power cord
Mini-jack audio cable, 1.5 meters (~5 feet)
USB cable, 1.5 meters (~5 feet)
Microfiber speaker bags
Microfiber power supply bag
Microfiber cable bag
Setup guide
Product line brochure
Differences between A2+ discontinued A2
USB digital-to-analog converter (DAC)
Variable audio output (connect a subwoofer or wirelessly send audio to other speakers with our optional W3 wireless adapter)
Upgraded speaker connectors
Standard 1/4" threaded inserts for wall mounts
Upgraded power supply
Upgraded accessory cables
Optional upgrades and accessories
Desktop stands available (DS1)
Wireless adapter available (W3)
Type
2.0 powered (active) multimedia desktop speaker system
Amplifier type
Dual class AB monolithic
Power output
60W peak power total (15W RMS / 30W peak per channel), AES
Drivers
2.75" Kevlar woofers, 3/4” silk dome tweeters
Inputs
3.5mm stereo mini-jack, RCA, USB
Outputs
RCA variable line-out
Main voltages
110-240V 50/60Hz auto-switching
SNR
>95dB (typical A-weighted)
THD+N
|
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 86 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 109.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.3 kHz
Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:
7.5 Kg (16.5 lbs)
AVAILABLE IN SIX COLOR FINISHES
![colors_01]( "colors_01")
| Two Way Bass Reflex Bookshelf Speaker System
Yamaha\'s NS-333 speaker system has been designed specifically for home theater applications. The bookshelf speaker is a bass-reflex design that can be used for main or surround channels and incorporates a 5\' Polymer-Injected Mica Diaphragm (PMD) cone woofer and a 1” aluminum dome tweeter. For improved imaging, the tweeter utilizes Yamaha’s exclusive waveguide horn.
Waveguide Horn
Unlike most homes, movie theaters use sound absorbing materials on walls and ceilings. The result is that the sound reaching your ears is the sound wave produced by the speakers rather than reflected off the walls. Yamaha has created wave guides that greatly reduce reflected sound and increase the proportion of directly generated sound waves reaching your ears. The result is a clear and precise sense of sound direction and placement.
Internally Wired with Monster Cable™
Yamaha has chosen to ensure optimum sound quality by internally wiring some of the components with Monster Cable™. This ensures a clean, clear signal from the crossover network to the speaker driver.
Magnetic Shielding
The speaker is magnetically shielded, so it can be placed on a TV or video monitor without degrading the picture via stray magnetic fields.
Performance Enhanced by a Handsome Cabinet
The EF series speakers are enclosed in an Elliptical Form cabinet with a high gloss black piano finish, which provides solid construction with minimal sound diffraction.
New Grill Design
New grill design and grill cloth provide an attractive and acoustically transparent protective cover for the drivers.
ΝΟΤΕ : The price is valid per piece and not per pair.
| Selling Unit: |
Piece |
| Type: |
2-Way Bass-Reflex Bookshelf Speaker System |
| Featured Technologies: |
- |
| Tweeter: |
2,5 cm aluminum dome with Waveguide |
| Midrange: |
- |
| Woofer: |
13 cm (5\') PMD |
| Power: |
150 W/60 W |
| Resistance: |
6 ohms |
| Frequency Response: |
60 Hz-35 kHz |
| Sensitivity: |
87 dB/2.83 V/1 m |
| Crossover Frequencies: |
3 kHz |
| Auto Standby Operation: |
- |
| Filters: |
- |
| Remote Control : |
- |
| Dimensions (W x H x D): |
200 x 320 x 213 mm |
| Weight: |
5,5kg/piece |
|
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 95Hz-24kHz
Lower -3dB Limit 125 Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 89 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ
|
Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years
|
Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch.
System Format: 2 Way
Frequency Response: 60Hz - 35kHz
Sensitivity (1W@1M): 89dB
Nominal Impedance: 6 Ohms
Maximum SPL (dBA): 111.8
Power Handling (RMS): 80W
Recommended Amplifier Requirements (RMS): 10-80W
Bass Alignment: Sealed Cabinet
Tweeter Crossover Frequency: 2.1kHz
Drive Unit Complement: 1 x 6" RST® Bass/Mid driver.
2 x 1" (25mm) C-CAM® gold dome tweeters
Product External Dimensions:
(H x W x D) 250 x 300 x 120 mm
(9 13/16 x 11 13/16 x 4 3/4 inch)
Individual Weight: 4.69 Kg (10.38 lb)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual Available in colors
|
Reviews
There are no reviews yet.