AUDIOENGINE A2+ AND ADS1 Powered Desktop USB Speakers with stands Red PAIR

Features
Built-in analog power amplifiers
Dual analog audio inputs
USB audio input
Hand-finished wood cabinets
Variable audio output
Custom Kevlar woofers and silk tweeters
Power-saving idle mode
Cables included
Works with Mac or PC, no software to install
Designed for desktop use, but will fill a room
Works with
iDevices and all music players
Internet radio and network music systems
Desktop computers, laptops, notebooks
Flat panel TVs with an analog output
CD and DVD players
Videogame consoles
Digital radio and satellite receivers
All products with 1/8" mini-jack or RCA outputs!
What's in the box
A2+ powered (left) speaker
A2+ passive (right) speaker
Speaker wire (16AWG), 2 meters (~6.5 feet)
Power supply
AC power cord
Mini-jack audio cable, 1.5 meters (~5 feet)
USB cable, 1.5 meters (~5 feet)
Microfiber speaker bags
Microfiber power supply bag
Microfiber cable bag
Setup guide
Product line brochure
Differences between A2+ discontinued A2
USB digital-to-analog converter (DAC)
Variable audio output (connect a subwoofer or wirelessly send audio to other speakers with our optional W3 wireless adapter)
Upgraded speaker connectors
Standard 1/4" threaded inserts for wall mounts
Upgraded power supply
Upgraded accessory cables
Optional upgrades and accessories
Desktop stands available (DS1)
Wireless adapter available (W3)

Type
2.0 powered (active) multimedia desktop speaker system
Amplifier type
Dual class AB monolithic
Power output
60W peak power total (15W RMS / 30W peak per channel), AES
Drivers
2.75" Kevlar woofers, 3/4” silk dome tweeters
Inputs
3.5mm stereo mini-jack, RCA, USB
Outputs
RCA variable line-out
Main voltages
110-240V 50/60Hz auto-switching
SNR
>95dB (typical A-weighted)
THD+N

System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 60 - 120 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)

AVAILABLE IN SIX COLOR FINISHES

Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red

Frequency Response: 80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance: 8 Ohms
Power Handling Single (RMS): 60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
Maximum SPL (dBA): 105
Bass Alignment: Bass reflex - rear ported
Drive Unit Complement: 1 x 100mm (4“) MMP®II cone mid-bass driver.
1 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 198 x 125 x 140 mm
(7 13/16 x 4 15/16 x 5 1/2)
Weight (each):
Kg (lbs) 2 (4 3/8)

System Format:    2 Way
Frequency Response:    42 Hz - 60 kHz
Sensitivity (1W@1M):    88 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    112.6 dBA
Power Handling (RMS):    120 W
Recommended Amplifier Requirements (RMS):    60 - 120 W
Bass Alignment:    Bass reflex. HiVe port system
Crossover Frequency:    2.7 kHz
Drive Unit Compliment:    1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands:    9.9 Kg (21.75 lbs)

Two way, bass-reflex
Woofer 130 mm. (5“)
Coated paper
Tweeter 28 mm.
Soft dome (silky fabric)
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 120W
Efficiency: 89 dB/W/1m
Dimensions: 200x270 Weight: 7,5 Kg
Finishing:solid walnut