| Content |
The A5+ 5" Active 2-Way Speakers (Pair, Black) from Audioengine provide high-quality audio in a compact and stylish design, ideal for use with a variety of audio sources and devices. The system consists of an active left speaker and a passive right speaker, which are connected together via full-size gold-plated 5-way binding posts. Each speaker has a hand-built cabinet made from 0.75" thick MDF wood. Each cabinet contains a custom 5" Kevlar woofer and a 0.8" silk tweeter to provide clear, detailed audio with a wide frequency response and excellent realism.
The cabinets have rear-facing bass ports to extend low frequency response and tweeter waveguides to provide a wide dispersion pattern and realistic stereo imaging. The left speaker has internal Class-AB amplifiers that provide a combined system power of 150W to deliver a strong performance with low distortion. The rear panel offers 3.5mm and RCA inputs, allowing you to connect computers, MP3 players, smartphones, and any other product with 3.5mm or RCA outputs. The speakers are also compatible with Audioengine wireless audio adapters, and Apple's Airport Express and AirPlay.
The active speaker also has a stereo RCA output so you can connect an additional device, such as a subwoofer. A USB power/charging output allows you to charge small devices such as MP3 players or mobile phones while you listen to music. A convenient front-panel volume control lets you make quick adjustments. Protection circuitry includes output current limiting, thermal over-temperature, power on/off transient protection, and a replaceable external main fuse for lasting reliability. The speakers are also magnetically shielded for safe use near video monitors and other electronics.
The bottom of each speaker has a high-density isolation pad to reduce vibrations and reflections when used on a table or desk. There are also 1/4“-20 inserts so you can mount the speakers on stands. The system has a selectable operating voltage for international use. A convenient remote control is included for controlling the speakers. You are also provided with connection cables and carrying bags for quick and easy setup.
Compact and Affordable The compact design is ideal for use in bedrooms, offices, dorm rooms, and any other spaces where high-quality audio is desired in a compact design Easy Setup Simply connect the active left speaker to the passive right speaker using the included cable, plug the active speaker into the wall, connect your audio source, and you're ready to go! The speakers have full-size gold-plated 5-way binding posts for a high-quality connection and signal path Hand-Built Cabinets Each cabinet is hand-built from 0.75" thick MDF wood. Each component is custom-designed and tuned together for a high level of efficiency and audio performance Custom Drivers Each cabinet contains a custom 5" Kevlar woofer and a 0.8" silk tweeter to provide clear, detailed audio with a wide frequency response and excellent realism. The strong materials and neodymium magnets are robust and efficient to retain their shape, even when being driven at high volume levels Bass Ports and Waveguides The cabinets have rear-facing bass ports to extend low frequency response and tweeter waveguides to provide a wide dispersion pattern and realistic stereo imaging Class-AB Amplifiers The left speaker has internal Class-AB monolithic amplifiers with gapless core toroidal transformers that provide a combined system power of 150W to deliver a strong performance with low distortion RCA and 3.5mm Inputs The rear panel offers 3.5mm and RCA inputs, allowing you to connect computers, MP3 players, smartphones, and any other product with 3.5mm or RCA outputs. The speakers are also compatible with Audioengine wireless audio adapters, and Apple's Airport Express and AirPlay RCA Output The active speaker has a variable preamp stereo RCA output so you can connect an additional device, such as a subwoofer USB Charging Port An internal 5V, 500mA USB power supply allows you to charge small devices such as MP3 players or mobile phones while you listen to music. The USB port does not support data transfer or music syncing Volume Control A convenient front-panel volume control lets you make quick adjustments Thermal Management and Protection Protection circuitry includes output current limiting, thermal over-temperature, power on/off transient protection, and a replaceable external main fuse for lasting reliability Shielded The speakers are magnetically shielded for safe use near video monitors and other electronics Isolation Pads The bottom of each speaker has a high-density isolation pad to reduce vibrations and reflections when used on a table or desk Stand Mounting Each cabinet has a 1/4“-20 insert so you can mount the speakers on stands International Operation The system has a selectable operating voltage for international use Remote and Accessories A convenient remote control is included for controlling the speakers. You are also provided with connection cables and carrying bags for quick and easy setup
Audioengine A5 specs
| Type | 2.0 Active Bookshelf-Style 2-Way Stereo Speaker System | | Amplifier | Dual Class-AB Monolithic with Gapless Core Toroidal Transformers | | Power Output | 150W Peak Power Total, 50W RMS/75W Peak Per Channel, AES | | Frequency Response | 50Hz - 22kHz ±1.5dB | | Signal to Noise Ratio | > 95dB (Typical A-Weighted) | | Total Harmonic Distortion (THD) | | | Crosstalk | | | Input Impedance | 10 kOhms, Unbalanced | | Woofer | 5" (127mm) Kevlar Woven Glass Aramid Composite Woofer with Rubber Surround and Advanced Voice Coil | | Tweeter | 0.8" (20mm) Silk Dome Tweeter with Neodymium Magnet | | Connectors | Left Speaker:
1 x AC Power Input
1 x 3.5mm Stereo Mini Input
1 x Stereo RCA Input (2 Jacks, L/R)
1 x Variable Stereo RCA Output (2 Jacks, L/R, Adjustable Full-Range)
1 x USB Type A Power/Charging Port
1 x 5-Way Binding Post Output to Right Speaker (2 Posts)
Right Speaker:
1 x 5-Way Binding Post Input from Left Speaker (2 Posts) | | Construction | 0.75" (19mm) Thick MDF Wood with Black Finish | | Protection | Output Current Limiting, Thermal Over-Temperature, Power On/Off Transient Protection, Replaceable External Main Fuse | | Operating Voltage | 115/240VAC, 50/60Hz Selectable | | Power Consumption | Idle: 10W
Mute: 6W
Sleep: 4W | | Environmental | Operating Temp: 32 to 95°F (0 to 35°C)
Storage Temp: -4 to 113°F (-20 to 45°C)
Relative Humidity: 5 to 95%, Non-Condensing | | Dimensions (HxWxD) | 10.75 x 7 x 7.75" (273 x 178 x 197mm) (Each Speaker) | | Weight | Left Speaker: 15.4 lbs (7kg)
Right Speaker: 9.6 lbs (4.4kg) |
|
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 95Hz-24kHz
Lower -3dB Limit 125 Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 89 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ
|
System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 60 - 120 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)
AVAILABLE IN SIX COLOR FINISHES
![colors_01]( "colors_01")
|
Driver Complements
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Areated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Enhanced Ring Radiator Dynamic Balance tweeter
Electrical
Overall Frequency Response 36Hz-40kHz
Lower -3dB Limit 50Hz dB
Upper -3dB Limit 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 88 dB
Crossover Orth Crossover
Crossover
(mid-high array) 2800HZ
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16 3/4" H x 8" W x 14 9/16" D
(42.55cm H x 20.32cm W x 36.99cm D)
Mounting Options speaker stands or shelf mount
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort bass venting
Shipping/Other
Product Weight 29.60 lbs. (13.43kgs)
Shipping unit: each
Total Shipping Weight 32.50 lbs. (14.74kgs)
Speaker Warranty 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
![]()
|
The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.
The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.
The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.
The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.
| Technical features | Metal dome Nautilus™ tweeter |
|---|
| Woven glass fibre cone bass / midrange | | Description | 2-way vented-box system | | Drive units | 1x ø25mm (1 in) metal dome high-frequency |
| 1x ø100mm (4 in) woven glass fibre cone bass / midrange | | Frequency range | -6dB at 72Hz and 50kHz | | Frequency response | 80Hz - 23kHz ±3dB on reference axis | | Dispersion | Within 2dB of reference response | | Horizontal: | over 60º arc | | Vertical: | over 10º arc | | Sensitivity | 85dB spl (2.83V, 1m) | | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m) |
| | | Two Way Bass Reflex Bookshelf Speaker System
Yamaha\'s NS-333 speaker system has been designed specifically for home theater applications. The bookshelf speaker is a bass-reflex design that can be used for main or surround channels and incorporates a 5\' Polymer-Injected Mica Diaphragm (PMD) cone woofer and a 1” aluminum dome tweeter. For improved imaging, the tweeter utilizes Yamaha’s exclusive waveguide horn.
Waveguide Horn
Unlike most homes, movie theaters use sound absorbing materials on walls and ceilings. The result is that the sound reaching your ears is the sound wave produced by the speakers rather than reflected off the walls. Yamaha has created wave guides that greatly reduce reflected sound and increase the proportion of directly generated sound waves reaching your ears. The result is a clear and precise sense of sound direction and placement.
Internally Wired with Monster Cable™
Yamaha has chosen to ensure optimum sound quality by internally wiring some of the components with Monster Cable™. This ensures a clean, clear signal from the crossover network to the speaker driver.
Magnetic Shielding
The speaker is magnetically shielded, so it can be placed on a TV or video monitor without degrading the picture via stray magnetic fields.
Performance Enhanced by a Handsome Cabinet
The EF series speakers are enclosed in an Elliptical Form cabinet with a high gloss black piano finish, which provides solid construction with minimal sound diffraction.
New Grill Design
New grill design and grill cloth provide an attractive and acoustically transparent protective cover for the drivers.
ΝΟΤΕ : The price is valid per piece and not per pair.
| Selling Unit: |
Piece |
| Type: |
2-Way Bass-Reflex Bookshelf Speaker System |
| Featured Technologies: |
- |
| Tweeter: |
2,5 cm aluminum dome with Waveguide |
| Midrange: |
- |
| Woofer: |
13 cm (5\') PMD |
| Power: |
150 W/60 W |
| Resistance: |
6 ohms |
| Frequency Response: |
60 Hz-35 kHz |
| Sensitivity: |
87 dB/2.83 V/1 m |
| Crossover Frequencies: |
3 kHz |
| Auto Standby Operation: |
- |
| Filters: |
- |
| Remote Control : |
- |
| Dimensions (W x H x D): |
200 x 320 x 213 mm |
| Weight: |
5,5kg/piece |
|
Reviews
There are no reviews yet.