AUDIOENGINE A2+ Powered Desktop USB Speakers, White

Features
Built-in analog power amplifiers
Dual analog audio inputs
USB audio input
Hand-finished wood cabinets
Variable audio output
Custom Kevlar woofers and silk tweeters
Power-saving idle mode
Cables included
Works with Mac or PC, no software to install
Designed for desktop use, but will fill a room
Works with
iDevices and all music players
Internet radio and network music systems
Desktop computers, laptops, notebooks
Flat panel TVs with an analog output
CD and DVD players
Videogame consoles
Digital radio and satellite receivers
All products with 1/8" mini-jack or RCA outputs!
What's in the box
A2+ powered (left) speaker
A2+ passive (right) speaker
Speaker wire (16AWG), 2 meters (~6.5 feet)
Power supply
AC power cord
Mini-jack audio cable, 1.5 meters (~5 feet)
USB cable, 1.5 meters (~5 feet)
Microfiber speaker bags
Microfiber power supply bag
Microfiber cable bag
Setup guide
Product line brochure
Differences between A2+ discontinued A2
USB digital-to-analog converter (DAC)
Variable audio output (connect a subwoofer or wirelessly send audio to other speakers with our optional W3 wireless adapter)
Upgraded speaker connectors
Standard 1/4" threaded inserts for wall mounts
Upgraded power supply
Upgraded accessory cables
Optional upgrades and accessories
Desktop stands available (DS1)
Wireless adapter available (W3)

Type
2.0 powered (active) multimedia desktop speaker system
Amplifier type
Dual class AB monolithic
Power output
60W peak power total (15W RMS / 30W peak per channel), AES
Drivers
2.75" Kevlar woofers, 3/4” silk dome tweeters
Inputs
3.5mm stereo mini-jack, RCA, USB
Outputs
RCA variable line-out
Main voltages
110-240V 50/60Hz auto-switching
SNR
>95dB (typical A-weighted)
THD+N

Frequency Response +/- 3dB:    60 Hz - 35 KHz
Sensitivity (1W@1M):    87 dB
Driver Compliment:    1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance:    8 ohms
Maximum SPL (each):    110.8 dBA
Recommended Amplifier Requirements (RMS):    25 - 100W
Bass Alignment:    Front ported - bass reflex. HiVE®II port system
Power Handling (RMS):    100W
Crossover Frequency:    3.0kHz
External Dimensions:
(H x W x D)    250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual):    3.95 kg (8 3/4 lbs)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.

The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.

The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.

The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.

# Perfect for use with ultra-shallow TVs 40-inch class and larger
# Only 1.5 inches (38mm) deep
# Wall mount bracket included
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter

Dimensions (mounted on wall without bracket) :23-1/4" H x 6" W x 1-1/2" D (59.1cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :23-1/4" H x 6" W x 1-9/16" D (59.1cm x 15.2cm x 40mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 2 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

Item    Value
System Format:     2 Way
Frequency Response:     55 Hz - 60 kHz
Sensitivity (1W@1M):     86 dB
Nominal Impedance:     8 ohms
Maximum S.P.L
(Per pair in room):     109.8 dBA
Power Handling (RMS):     100 W
Recommended Amplifier Requirements (RMS):     50 - 100 W
Bass Alignment:     Bass reflex. HiVe port system
Crossover Frequency:     2.3 kHz
Drive Unit Compliment:     1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)
    300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:     

7.5 Kg (16.5 lbs)

Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years