| Content | Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) |
Model A7
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
USB streaming from PC / Mac®
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 75mm (3.0in) Midrange
1x 150mm (6.0in) Subwoofer
Frequency response 40Hz - 36kHz ±3dB on reference axis
Frequency range -6dB at 36Hz and 42kHz
Amplifier power output 2x 25W (tweeter)
2x 25W (midrange)
1x 50W (subwoofer)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 100 W
Standby power consumption |
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. |
Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.
- Audiophile Bluetooth Music Converter
- High quality music replay from mobile devices
- Burr Brown PCM5102 24bit DAC
- Uses aptX™ streaming technology
- High-end audio circuitry and components
- High quality cast aluminium casework
The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.
Technical Specifications
- DAC: TI PCM5102
- Frequency response: 10Hz — 20kHz, ±0.1dB
- Total Harmonic Distortion: + Noise 0.002%
- Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
- Line output level: 2.15Vrms
- Supported CODECs: SBC, AAC, aptX®
- Power requirements: 0.7W max
- Dimensions (wxdxh, mm): 75 x 100 x 26
- Weight: 350g
|
Bluetooth Receiver
- Magnetic holder on the back
- 2 Symmetrical 6.3 mm jack outputs
- Dimensions (W x D x H): 100 x 64 x 34 mm
- Weight: 116 g
- Includes power supply
|
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
Reviews
There are no reviews yet.