Content | Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
Type |
Powered Bluetooth speaker |
Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
Power Output |
60W peak total |
Input Impedance |
10K ohms unbalanced |
Frequency Response |
65Hz - 22kHz (+/-2dB) |
SNR |
>95db (typical A-weighted) |
THD+N |
|
|
Model A5
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 100mm (4.0in) Mid and low range
Frequency response 47Hz - 22kHz ±3dB on reference axis
Frequency range -6dB at 40Hz and 24kHz
Amplifier power output 2x 20W (tweeter)
2x 20W (midrange)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 48W
Standby power consumption |
Sound Bar Drivers: 6 x 3.0” mid woofer drivers, 3 x 1”
aluminum dome tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs/Outputs: HDMI 1.4a in (3), HDMI 1.4a out (1),
Toslink Optical input (1), Analog 3.5 mm mini-jack AUX
(1), USB-A for firmware updates and phone charging
Sub Drivers: Drivers: 1 x 8” sub
Wireless Sub
Wireless Connectivity: 2.4GHz & 5.8GHz |
Bluetooth Receiver
- Magnetic holder on the back
- 2 Symmetrical 6.3 mm jack outputs
- Dimensions (W x D x H): 100 x 64 x 34 mm
- Weight: 116 g
- Includes power supply
|
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
|
The new irDAC-II continues the story adding Bluetooth connectivity, headphone output and DSD128 support. The irDAC-II comes packed with cutting edge technology and features that will benefit the most demanding user. We have gained a lot of knowledge developing class leading DACs. Areas like isolation of the digital and analogue stages, ultralow noise power supplies and a direct coupled signal path make a big difference. We use the outstanding ESS Sabre DAC to obtain performance that we believe will be unmatched in this price category. Jitter reduction is an obsession within our engineering team. They have applied their experience in the irDAC-II to produce a signal that is almost jitter free. The headphone output stage has been taken from the flagship A49 amplifier and is capable of driving the most demanding of headphones. Both fixed and variable line outputs are also available, allowing for ultimate system building flexibility.
The irDAC-II is designed to be the heart of a digital system and can be connected to a host of different types of digital sources and connections. This includes asynchronous USB and Bluetooth. All of the inputs can be controlled through an IR remote that will also give you transport control of a PC or Mac USB source via the HID (Human Interface Device) control.
• Mini component wireless DAC • High performance headphone amplifier • AptX Bluetooth wireless streaming • ESS ES9016 Sabre DAC chipset • High precision digital reclocking • Up to 24/384 via USB • Up to 24/192 via coax • Up to 24/96 via optical • DSD128 via USB • Isolated digital and analog direct coupled circuits • Individually regulated power supplies • 2x digital coax inputs Fixed and variable • Headphone output (30 to 600Ω) • 4 layer PCB • Aluminum case with non‐slip rubber base • 12V external power supply included • Mini remote control included • Weight: 2.4 lbs (1.1kg) • Packaged weight: 5 lb (2.1 kg) • Packaged dimensions (W x D x H): 10.1\'\' x 12.1\'\' x 2.3\'\' (260 x 310 x 60mm) • EAN: 506013360254‐5
Supported sample rates:
- USB: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz
- Optical: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Coaxial: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Bluetooth: SBC, AAC, aptX, aptX:LL
- Bit Depth : 16:bit, 24:bit
- Headphone : 30Ω : 600Ω, 3.5mm plug
- Power requirements: 18W max
- Dimensions: W194 x H44 x D124mm
- Weight: 1.1kg
|
Reviews
There are no reviews yet.