Content | Audioengine B1 Premium Bluetooth® Music Receiver
B1 is a high-fidelity audio component that easily integrates into
your music system and plays music directly from your library or streams
from any app. The B1 streams high-quality audio from your
Bluetooth®-enabled smartphone, computer, or tablet to any music system
or powered speakers.
Easy setup
The B1 is a simple way to get great-sounding wireless music from
your device out to any music system. Setup and pairing is really easy
and no special software is needed. Hereʼs how to connect B1 to your
music system and pair with your tablet, computer, or smartphone:
Connect the included audio cables from the B1 rear panel to your music system.
Connect the included power adapter to B1 and plug into an AC outlet. B1 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B1” to pair and connect.
Play your music. Setup is really this easy!
Versatile
The audio quality of most Bluetooth products isn't usually very
inspiring and their limited range can be frustrating. The B1 solves
these problems by implementing the aptX codec, which is a high-quality
audio converter designed specifically for audio. The B1 also has special
circuitry and a precision-tuned antenna to extend the wireless range,
providing much more versatility than other Bluetooth receivers.
Upgrade your Bluetooth and breathe new life into your audio system.
You already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B1
Bluetooth Receiver including aptX, 24-bit upsampling DAC, and extended
range.
See and hear the difference
The aluminum case of the B1 reflects traditional Audioengine design
and the high-quality components and audio fidelity are typical of
Audioengine's commitment to great sound at affordable prices. The
Audioengine B1 continues to close the gap between your computer music
and home hi-fi and even if you're not an audio enthusiast we guarantee
your music will sound better!
Type |
Bluetooth 4.0 audio with aptX codec |
Inputs |
Bluetooth |
Outputs |
Stereo analog RCA
Digital optical (SPDIF) |
Impedance |
57 Ohms |
Frequency Response |
10Hz - 20kHz (+/-0.5dB) |
SNR |
SNR (DC to 20 kHz)
>100dB |
THD+N |
(1 kHz FS 96 kS/s) |
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
Features
- For use with DN-202WR
- Sends audio up to 30m (100 ft) without wires
- XLR and 1/4” audio inputs
- Able to broadcast to multiple receivers (sold seperately)
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
- DN-202WT
- Power adapter (5VDC, 3A, center-positive)
- User Guide
- Safety and warranty manual
|
- For NAVIS Series Speakers
- Wireless Source-to-Speaker Connection
- Sends Uncompressed Audio
- 5 Hz to 22.1 kHz Frequency Range
Go wireless with the AirX2 NAVIS Transmitter from ELAC. Using 2.4 GHz wireless technology, the AirX2 NAVIS offers you the freedom to connect your source to your NAVIS speakers easily and without running unsightly cables across the room. It transmits uncompressed audio and is equipped with a pair of RCA inputs for easy connection to your audio source. Included in the package is a power adapter and a set of international AC plugs.
Wireless
Transmitter Interfaces
Input Connectors |
1 x 2RCA (Stereo Analog) Female |
Power
Power Connector |
1 x Barrel (7.5 VDC) Input |
General
Dimensions |
3.7 x 3.62 x 1.54" / 94 x 92 x 39 mm |
Weight |
0.44 lb / 0.2 kg |
| Driver Complement: One front-firing x 4.0” midwoofer, Four
x 1.0” aluminum dome tweeters, Two x 4.0” bass radiators
Amplification: 1 x 30W Woofer, 4 x 15W tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, Analog, Ethernet, USB-A for firmware
updates and phone charging | Amplification: Class-D Digital Peak: 150 W x 2 @ 4 ohms
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, AUX, RCA, USB-A for firmware updates and
phone charging, Ethernet
Outputs: Left and Right Speaker Binding posts, LFE |
Amplifier power (watts): 20 watts (RMS)
Controls: Volume & power
W x H x D (mm): 387 x 155 x 130
Weight (kg): 2.25
Frequency response (Hz): 70 - 18,000
Connections: Additional stereo input via 3.5mm minijack for use with non-Bluetooth enabled devices
Finish: Black |
Reviews
There are no reviews yet.