| Content |
The ADX10FL P is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the area or section being miked from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz - 18 kHz, the ADX10FL P is lightweight, low profile and will provide natural sound with exceptional transient response.
The ADX10FL P, specifically for use with a flute, includes a clip that attaches to the headstock of a flute, an 8ʼ cable terminating to a mini XLR-f connector and a phantom power adapter (APS 911). Other model versions are available as well, one of which is the ADX10 FL; for use with the Audix RAD360 wireless system which includes a flute clip, 3ʼ attached cable terminating to a mini-XLRf connector.
Manufactured to high standards and tight tolerances, the ADX10FL P features a modular threaded capsule, machined brass body with matte black finish, high quality shielded microphone cable and a variety of optional accessories.
| Type | Pre-polarized Condenser |
|---|
| Polar Pattern | Cardioid | | Frequency Response | 50Hz - 18kHz | | Impedance | 250 Ohms | | Sensitivity | 4.5 mV/Pa @1k |
|
The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.
Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g
| The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments.
Features
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
Delivery Includes
1 e 604
1 drum clip
1 pouch
Technical Data
Frequency Response 40.....18000 Hz
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 33 x 59 mm
Weight w/o cable 60 g |
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
|
Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin
Made in Germany
Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!
Flexible tool iN The studio
The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.
|
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
|
Reviews
There are no reviews yet.