| Content | Vocal microphone designed to sound clear and full bodied on small to mid-sized PA systems
The f50 embodies a tight and uniformly controlled cardioid polar pattern which assists in isolating the vocals from the instruments on stage. The f50 is also available with a noiseless, magnetic on/off switch (f50S).
Its warm, natural sound reproduction, resistance to feedback and ability to handle high SPLs without distortion allows the f50 to be utilized in a variety of live and studio applications. The f50 is an entry level, all purpose vocal microphone for small to midsize PA systems.
| Type |
Dynamic |
| Polar Pattern |
Cardioid |
| Frequency Response |
50Hz - 16kHz |
| Impedance |
250 ohms |
| Sensitivity |
@1k 2.5 mV/Pa |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
|
|
|
|
| Pick Up Pattern |
Cardioid |
| Frequency Response |
30 - 17,000 Hz |
| Sensitivity |
2 mV/Pa +/- 3 dB |
| Nominal Impedance |
200 ohms |
| Min Terminating Impedance |
200 ohms |
| Dimensions |
8.375" x 1.875" x 2" |
| Weight |
Approx. 14 oz (385 g) |
|
|
| Product Features:
Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance
Ultra-wide frequency response for brilliant and transparent sound
Extremely high signal output lets your voice cut through
Cardioid characteristic minimizes background noise and feedback
Convenient on/off switch to mute during breaks
Integrated spherical wind and pop noise filter
Microphone stand adapter and impact-resistant carrying case included
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
The Behringer XM1800S is a set of three dynamic microphones and a hard case, perfect for starting your recording or live setup. Dynamic microphones are an essential for live performance and recording. Thanks to Behringer's XM1800S Ultravoice Dynamic Microphone, 3 Pack, you'll have a set of versatile microphones which serve to provide you with excellent, high quality, results, night after night. Their super-cardioid polar pattern design ensures a tight and focused sound, with minimal bleed from off-axis sources. This is especially useful for ensuring vocals cut through dense mixes or if the vocalist plays an instrument simultaneously.
The bundle includes a protected, padded, hard-case, built to withstand the hardships of continued use and touring. As well as this, there's three microphone stand adapters. Thanks to Behringer you'll be presented with a premium quality package, ideal for a wide range of applications.
The ideal choice for live sound
Dynamic microphones are designed to be robust, durable and resitant to damage, and moisture,and are able to withstand the most powerful of voices. The XM1800s' super-cardioid design provides you with a tight sound. This is ideal for a focused capture, whilst rejecting ambience from unwanted, off-axis sources. Because of the tight pick up pattern the XM1800S are an excellent choice to use on musicians who play an instrument whilst singing. Behringer make your job easier, ensuring that every voice is heard and resonates with the listener.
A great all round package
As well as the three dynamic XM1800S mics, the pack also includes an impact-resistant carry case, microphone clips and stand adapters. Behringer have included these accessories to provide the key essentials you'll need for transporting and setting up your microphones. The impact-resistant carry case is designed to offer added durability and a safe way of transporting your microphones, minimising any damage.
Features
- Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance
- Ultra-wide frequency response for brilliant and transparent sound
- Extremely high signal output lets your voice cut through
- Cardioid characteristic minimizes background noise and feedback
- Convenient on/off switch to mute during breaks
- Integrated spherical wind and pop noise filter
- Microphone stand adapter and impact-resistant carrying case included
- Conceived and designed by Behringer Germany
Specifications
- Type: Cardioid Dynamic Microphone
- Impedance: 600 ohms
- Sensitivity: -52dBV (0 dBV = 1V/Pa), 2.5mV/Pa
- Frequency Response: 80Hz - 15kHz
- Connector: Gold-Plated XLR
- Weight: Approx. 230g
|
Electro-Voice Cobalt CO9
The Co9 is a favorite among vocalists across all musical genres.
Technical Specifications
Element: Dynamic Neodymium magnet structure
Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (600 Ohms) Sensitivity Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa* 1 Pa = 94 dB SPL
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Durable polyurethane paint
Materials Die cast zinc housing
Dimensions Length 6.7 in. (170 mm) Diameter 2.1 in. (53 mm) Shank .85 in. (22 mm)
Weight Net 11.8 oz. (306 grams) Shipping 29.9 oz. (819 grams)
Accessories included Stand adaptor (black) Gig bag
|
Professional dynamic microphone with On/Off switch. Very robust construction and excellent value-for-money. 4,5 m XLR male / XLR female cable included.
Product type
Microphones
Type
Vocals
Frequency response
80 - 15000lx @ 1m Hz
Directivity
cardioid
Nominal impedance
500 Ohm(s)
Max. SPL (1% THD @ 1kHz)
132 dB
Microphone input
XLR /3-pin, gold plated)
Length
165 mm
Diameter
52 mm
Accessories (included)
XLR / XLR cable, 4.5 m
Weight
0,652 kg
Features
on/off switch, locking |
Reviews
There are no reviews yet.