AUDIX Fireball-V Dynamic harmonica microphone with conveniently placed volume control knob

146.46 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Dynamic harmonica microphone with conveniently placed volume control knob. The FireBallV, with a cardioid pickup pattern for isolation and feedback control, is equipped with a VLM™ diaphragm for natural sound reproduction with exceptional transient response. Designed for harmonicas (both diatonic and chromatic) and beatbox, the FireBallV has the added feature of a volume control knob.  The […]

 

Read more

Dynamic harmonica microphone with conveniently placed volume control knob.

The FireBallV, with a cardioid pickup pattern for isolation and feedback control, is equipped with a VLM™ diaphragm for natural sound reproduction with exceptional transient response.

Designed for harmonicas (both diatonic and chromatic) and beatbox, the FireBallV has the added feature of a volume control knob.  The FireballV has a wide frequency response of 50 Hz – 16 kHz and is lightweight, compact and comfortable to hold.

Because the FireBallV is a low impedance microphone, a quality, low-high impedance transformer (T50k) is required when using with a guitar amplifier.

Type Dynamic
Polar Pattern Cardioid
Frequency Response 50Hz – 16Hz
Impedance 280 ohms
Sensitivity 1.5 mV/Pa @1k

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIX Fireball-V Dynamic harmonica microphone with conveniently placed volume control knob”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIX Fireball-V Dynamic harmonica microphone with conveniently placed volume control knob removeSENNHEISER E-609 Dynamic Microphone for Strings removeAKG D 40 Dynamic Instrument Microphone removeAKG C 414-XLII/ST Matched Pair removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz remove
NameAUDIX Fireball-V Dynamic harmonica microphone with conveniently placed volume control knob removeSENNHEISER E-609 Dynamic Microphone for Strings removeAKG D 40 Dynamic Instrument Microphone removeAKG C 414-XLII/ST Matched Pair removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKUFireball-VH10SE00147D 40C 414-XLII STBETA57AKSM137/SL
Rating
Price 146.46 incl. GR VAT 98.00 incl. GR VAT 101.00 incl. GR VAT 2,100.00 incl. GR VAT 175.00 incl. GR VAT 396.80 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Dynamic harmonica microphone with conveniently placed volume control knob.

The FireBallV, with a cardioid pickup pattern for isolation and feedback control, is equipped with a VLM™ diaphragm for natural sound reproduction with exceptional transient response.

Designed for harmonicas (both diatonic and chromatic) and beatbox, the FireBallV has the added feature of a volume control knob.  The FireballV has a wide frequency response of 50 Hz - 16 kHz and is lightweight, compact and comfortable to hold.

Because the FireBallV is a low impedance microphone, a quality, low-high impedance transformer (T50k) is required when using with a guitar amplifier.

Type Dynamic
Polar Pattern Cardioid
Frequency Response 50Hz - 16Hz
Impedance 280 ohms
Sensitivity 1.5 mV/Pa @1k

 

The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.

Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

Complete With Stereo Bar, Windshield's and Cradle'

The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.

The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.

Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.

The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.

Features:

  • High sensitivity and extremely low self noise
  • Five switchable polar patterns for placement and application flexibility
  • Two-color LEDs provide quick visual indication of selected polar pattern and output overload
  • Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
  • Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
  • High sound pressure level capability, 140 - 158dB, and wide dynamic range
  • Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
  • Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
  • All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions

Specifications:

  • Type: 1" large diaphragm pressure gradient microphone
  • Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
  • Frequency Range: 20 to 20,000 Hz
  • Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
  • Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
  • Preattenuation Pad: -6, -12,-18 dB, switchable
  • Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: = 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Current consumption: Approximately 4.5 mA
  • Dynamic range: 134 dB minimum
  • Environment Temperature range: -10° C to +60° C (14° F to 140° F)
  • Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight 300 g (10.6 oz.)

 

Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A highly consistent cardioid polar pattern
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

Weight1.00 kg0.14 kg0.24 kg2.00 kg0.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.14 kg
Weight 0.24 kg
Weight 2.00 kg
Weight 0.50 kg
Weight 0.50 kg