AUDIX f90 Miniature clip-on condenser microphone for drums and percussion

No longer available!

123.39 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The f90 is a cost effective, miniature clip-on condenser microphone for drum and percussion applications. The f90 is intended for rehearsal bands, small clubs, schools and Houses of Worship. The f90 has a uniformly controlled cardioid polar pattern and provides a rich, full sound at distances of 3”-4” off the drum head. The f90 is […]

 

Read more

The f90 is a cost effective, miniature clip-on condenser microphone for drum and percussion applications. The f90 is intended for rehearsal bands, small clubs, schools and Houses of Worship.

The f90 has a uniformly controlled cardioid polar pattern and provides a rich, full sound at distances of 3”-4” off the drum head. The f90 is lightweight, compact and simple to use. The flexible gooseneck, paired with the 90-degree angle of the microphone head, allows the f90 to be positioned directly over the sound source.

The f90 operates on phantom voltage of 9-52 V and is supplied with a phantom power adapter, 6ʼ integrated mic cable and foam windscreen.

Type Condenser
Polar Pattern Cardioid
Frequency Response 50Hz – 18kHz
Impedance 250 Ohms
Sensitivity 8.8 mV/Pa @1k
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIX f90 Miniature clip-on condenser microphone for drums and percussion”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIX f90 Miniature clip-on condenser microphone for drums and percussion removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE removeAKG D 40 Dynamic Instrument Microphone removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz removeSENNHEISER E-609 Dynamic Microphone for Strings remove
NameAUDIX f90 Miniature clip-on condenser microphone for drums and percussion removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE removeAKG D 40 Dynamic Instrument Microphone removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz removeSENNHEISER E-609 Dynamic Microphone for Strings remove
Image
SKUf90H10SE00103D 40LDWS1000MWKSM137/SLH10SE00147
Rating
Price 123.39 incl. GR VAT 179.00 incl. GR VAT 101.00 incl. GR VAT 108.04 incl. GR VAT 396.80 incl. GR VAT 98.00 incl. GR VAT
Stock

Only 1 left in stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe f90 is a cost effective, miniature clip-on condenser microphone for drum and percussion applications. The f90 is intended for rehearsal bands, small clubs, schools and Houses of Worship. The f90 has a uniformly controlled cardioid polar pattern and provides a rich, full sound at distances of 3”-4” off the drum head. The f90 is lightweight, compact and simple to use. The flexible gooseneck, paired with the 90-degree angle of the microphone head, allows the f90 to be positioned directly over the sound source. The f90 operates on phantom voltage of 9-52 V and is supplied with a phantom power adapter, 6ʼ integrated mic cable and foam windscreen.
Type Condenser
Polar Pattern Cardioid
Frequency Response 50Hz - 18kHz
Impedance 250 Ohms
Sensitivity 8.8 mV/Pa @1k
  • Especially for tom and snare recording
  • Polar pattern: cardioid
  • Frequency range: 40 - 18,000 Hz
  • Impedance: 350 Ω
  • Robust metal chassis
  • Incl. special tom holder
  • Bag included
  • Dimensions: 63 x 41 mm
  • Weight: 125 g

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A highly consistent cardioid polar pattern
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.

Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g

Weight1.00 kg0.30 kg0.24 kg0.35 kg0.50 kg0.14 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.30 kg
Weight 0.24 kg
Weight 0.35 kg
Weight 0.50 kg
Weight 0.14 kg