Avantone AV-CR14 Dual ribbon mic, inc shock mount, wooden mic box and metal carry case

346.32 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
This elegantly designed bi-directional (figure 8) velocity ribbon microphone is intended for use in modern, state-of-the-art studios as well as private home studios. It offers the unique, pleasing sonic character that is similar to those classic ribbon mics of yesteryear. The special dual-ribbon design offers a better sensitivity rating than most single ribbon mics on […]

 

Read more

This elegantly designed bi-directional (figure 8) velocity ribbon microphone is intended for use in modern, state-of-the-art studios as well as private home studios. It offers the unique, pleasing sonic character that is similar to those classic ribbon mics of yesteryear.

The special dual-ribbon design offers a better sensitivity rating than most single ribbon mics on the market. You will also find that it does NOT exhibit the very dark, muted character of some ribbon mics…On the contrary, you will find it to be full-range with a very, natural detailed sound.

The “in-phase” signal is achieved when the microphone is addressed from the front side of the mic. (Where the AVANTONE logo is shown)

Features

•    Unique, elegant “retro” body design
•    Dual, Low-Mass Ribbon element which enables a much better sensitivity rating than most single ribbon designs
•    Fast accurate transient response, ultra-high 148 dB SPL capability, and overall stunning realism
•    Figure-8 audio directionality (pickup) pattern via front and rear, with extended sweet spots (as compared to Large Diaphragm condenser mics & single ribbon designs)
•    Low residual noise
•    No power supply required
•    No internal active electronics to overload or produce distortion
•    Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability

Applications

Excels with studio solo vocals, group vocals and simultaneous vocal duets. Also recommended for piano, electric guitar cabs and acoustic guitar, orchestral, woodwind & brass instruments as well as hand-percussion instruments.

Very interesting and satisfying tracks can also be achieved using (2) CR-14ʼs for stereo tracking.

Specifications

Ribbon Type: Dual Ribbon / Pure Aluminum / 35mm x 5mm / 2 microns thick
Polar Pattern: Figure-8
Magnets: Rare Earth Neodymium
Frequency Response:  30 -15,000 Hz +/- 3dB
Sensitivity: -52 dBv +/- 2dB Re. (0dB=1V/Pa)
Output Impedance:

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “Avantone AV-CR14 Dual ribbon mic, inc shock mount, wooden mic box and metal carry case”

Your email address will not be published. Required fields are marked *

Quick Comparison

Avantone AV-CR14 Dual ribbon mic, inc shock mount, wooden mic box and metal carry case removeNEUMANN TLM-193 Cardioid Condenser Microphone removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeAKG PERCEPTION 220 CONDENSER MICROPHONE removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeBEHRINGER C1 Studio Condenser Microphone remove
NameAvantone AV-CR14 Dual ribbon mic, inc shock mount, wooden mic box and metal carry case removeNEUMANN TLM-193 Cardioid Condenser Microphone removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeAKG PERCEPTION 220 CONDENSER MICROPHONE removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeBEHRINGER C1 Studio Condenser Microphone remove
Image
SKUAV-CR14H11NE00001KSM44SLPERCEPTION 220E005243E005249
Rating
Price346.32 incl. GR VAT 1,399.00 incl. GR VAT 938.00 incl. GR VAT 180.00 incl. GR VAT 80.00 incl. GR VAT 57.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

This elegantly designed bi-directional (figure 8) velocity ribbon microphone is intended for use in modern, state-of-the-art studios as well as private home studios. It offers the unique, pleasing sonic character that is similar to those classic ribbon mics of yesteryear.

The special dual-ribbon design offers a better sensitivity rating than most single ribbon mics on the market. You will also find that it does NOT exhibit the very dark, muted character of some ribbon mics…On the contrary, you will find it to be full-range with a very, natural detailed sound.

The "in-phase” signal is achieved when the microphone is addressed from the front side of the mic. (Where the AVANTONE logo is shown)

Features

•    Unique, elegant "retro” body design
•    Dual, Low-Mass Ribbon element which enables a much better sensitivity rating than most single ribbon designs
•    Fast accurate transient response, ultra-high 148 dB SPL capability, and overall stunning realism
•    Figure-8 audio directionality (pickup) pattern via front and rear, with extended sweet spots (as compared to Large Diaphragm condenser mics & single ribbon designs)
•    Low residual noise
•    No power supply required
•    No internal active electronics to overload or produce distortion
•    Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability

Applications

Excels with studio solo vocals, group vocals and simultaneous vocal duets. Also recommended for piano, electric guitar cabs and acoustic guitar, orchestral, woodwind & brass instruments as well as hand-percussion instruments.

Very interesting and satisfying tracks can also be achieved using (2) CR-14ʼs for stereo tracking.

Specifications

Ribbon Type: Dual Ribbon / Pure Aluminum / 35mm x 5mm / 2 microns thick
Polar Pattern: Figure-8
Magnets: Rare Earth Neodymium
Frequency Response:  30 -15,000 Hz +/- 3dB
Sensitivity: -52 dBv +/- 2dB Re. (0dB=1V/Pa)
Output Impedance:

Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohms18 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-321 dB
Equivalent SPL DIN/IEC 65110 dB-A
S/N ratio CCIR 468-373 dB
S/N ratio DIN/IEC 65184 dB
Maximum SPL for THD 0.5%140 dB
Maximum output voltage13 dBu
Dynamic range of the microphone amplifier DIN/IEC 651130 dB
Supply voltage48 V ± 4 V
Current consumption3 mA
Matching connectorsXLR 3F
Weight480 g
Diameter49 mm
Length175 mm

KSM44A Multi-Pattern Dual Diaphragm Microphone Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).

Features

  • Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides  transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.  
  • Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
  • Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
  • Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
  • Premium electronic components and gold-plated internal and external connectors
  • Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
  • Integrated three-stage "pop” protection grille reduces plosives and other breath noise

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid, Omnidirectional, Bidirectional
    lmpedance 50 ohms
    Phantom power required? 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum


  • One-inch large-diaphragm, true condenser cardioid transducer
  • Rugged all-metal body
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary AKG sound quality
  • Designed and engineered by AKG in Vienna, Austria
  • Comes with spider-type shock mount and aluminium carrying case
The Perception 220 is a large-diaphragm true condenser microphone offering outstanding build quality and excellent value. Its many useful features and included accessories make this microphone uncommonly versatile. It delivers a classic warm, clear sound and conforms to the stringent standards defined for AKG recording products. These standards are based on AKG΄s six decades of experience in making microphones and on input from sound engineers around the world who use AKG products every day. Its 1-inch large-diaphragm true condenser transducer brings AKG studio quality to the project studio as well as all other areas of recording and live sound applications. A switchable bass cut filter and preattenuation pad make it perfectly suited even for use on loud sound sources producing sound pressure levels up to 155 dB SPL. The rugged and roadworthy design makes it also a perfect choice for on-stage applications. The Perception 220 comes with a spider-type shock mount and a rugged metal case.
Type 1" Large Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 18 mV/Pa (-35 dBV)
Max. SPL 135 dB/155 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance =1000 ohms
Current consumption

Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone



The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.

 

Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included

 

 

 

Manual Download

Behringer C-1 Studio Condenser Microphone   Behringer C-1 Studio Condenser Microphone The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
  • Professional large-diaphragm condenser microphone for unsurpassed audio quality
  • Ideal as main and support microphone for studio and live applications
  • Exceptionally flat frequency response and ultra-high sound resolution
  • Cardioid pickup pattern for outstanding sound source separation and feedback rejection
  • Ultra low-noise transformerless FET input circuitry
  • LED indicates phantom power operation
  • Gold-plated 3-pin XLR output connector for perfect signal transmission
  • Ultra-rugged construction with die-cast body
  • Swivel stand mount and carrying case included
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 0.63" / 16.0 mm
Polar Pattern Cardioid
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 136 dB SPL
Impedance 100 Ohms
Load Impedance 1000 Ohms
Sensitivity -33 dB
THD 1%
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin
Power
Operating Voltage 36 to 52 V
Operating Current Consumption 2.5 µA
Physical 0.93 lb / 0.42 kg
Dimensions ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
 
Weight0.50 kg0.48 kg1.00 kg1.00 kg0.40 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.48 kg
Weight 1.00 kg
Weight 1.00 kg
Weight 0.40 kg
Weight 0.50 kg