Content | Product Features
New! Virtual TachTM eliminates the need for a tach wire in most installations
New! D2D serial data port for Xpresskits
New! Bitwriter programmable for easy configuration
2-Way LCD 5-button remote is backlit, has tone and vibe modes, Zone ID
Command confirmations and event notifications via the LCD remote control
Temp Check and clock time via the LCD remote control
One-Way functions withe the 4-button companion remote (included)
All the security features you expect - Zone-2 Impact sensor, Fault-proof starter interrupt, Nuisance Prevention, Warn-Away, Revenger siren, and more!
System Features
Limited Lifetime Warranty
D2D serial port for Xpresskits
Virtual Tach
Anti-Grind output (relay required)
Timer Mode
Keyless Entry (while running for 4113)
Fault-proof starter interrupt
Keep your car where you parked it with this layer of protection against "hot-wiring” by car thieves.
Zone-2 impact sensor
Detects blows or impacts to your vehicle with this 2-stage sensor that can react either with chirps or the full wrath of the siren.
XR Plus
Directed Electronics recently made a significant performance upgrade to the RF receiver section of many of our award-winning security and remote start systems. The new XR+ Extreme Range superheterodyne receiver has an improved sensitivity specification of between 3 dB and 6 dB, which equates to a measurable range increase on the order of 15 percent. It also offers improved image rejection for certain types of RF interference, resulting in improved reliability.
ESP2
ESP2 is Directed's exclusive serial communications protocol that allows extra ultra-security, high-speed communication between systems and enables many of Directed's key features.
Nuisance Prevention® Circuitry (NPC®)
Neighborhood-friendly anti-false alarm technology
Virtual Tach
A dedicated A-to-D converter samples your vehicleʼs voltage hundreds of times each second, eliminating the need for a tachometer wire connection.
D2D serial data port
Quickly connects your Avital system to other interface devices via D2D cables.
XCR onboard relays
Extreme capacity remote start relays are built-in to Avital remote start systems.
Bitwriter programmable
Program your Avital system with the Innovations Award-winning Bitwriter hand-held programmer |
Comfort Closure
Priority Icon Map with 20% Larger Display
Tone and Vibrate Alert Modes
Control Center with Integrated Valet Switch and Bright Blue Status LED
Revenger® Six-Tone Soft-Chirp Siren
Horn Honk
Includes One 5-Button LCD 2-Way SuperCode Remote and One 5-Button 1-Way SuperCode Remote
24 Channel Security/Keyless Entry System
Parking Light Flash
Flex Relays and Light Flash
Confirms Commands on LCD Screen
On-Board Door Lock Relays
Rechargeable Battery
D2D Port for Plug-in Xpresskit Vehicle Interface
Stinger® DoubleGuard® Shock Sensor
SuperCode Technology - up to 2000 foot range
Failsafe® Starter Kill
5 Auxilliary Channels
Priority User Interface
2000ft Range
|
Responder HD Color SuperCode SST 2-Way Security and Remote Start System
Responder HD features Clifford's most advanced color remote, operating a one-mile range, 2-Way security and remote start system with an upgraded user interface, mini-USB charging port and patented menu wheel.
No effort has been spared by the Clifford development team to create the ultimate color keychain remote control, operating Clifford's top-of-the-line, one-mile range 2-Way vehicle security and remote start system. The result is Clifford Responder HD, winner of the coveted CES 2009 Innovations Award. Some of the milestones achieved by our team include:
One-mile range color remote, using 900 MHz Spread Spectrum Technology (SST)
A brand new user interface, for the first time utilizing the patented Menu Wheel
New custom Clifford animations, to confirm user commands and illustrate system events, on a 128 x 128 pixel Organic Light Emitting Diode (OLED) high contrast panel, with 262K and 65K full colors, and a wide 160° viewing angle, employing an anti-glare polarizer for enhanced daylight visibility
The OLED display panel on the Clifford Responder HD color remote is 20% larger than previous LCD panels on a keychain remote
Clifford has created a sophisticated and complex remote control that is more intuitive than competing security products. It walks the new user through the system operation on-screen while delivering tons of real-time information for the power user. Clifford completely re-thought the manual layouts so users can play with the remote, and if something unexpected occurs or attracts their interest, they can easily find a quick and simple explanation with references to as much detail as they want.
Built-in Info Center: the Responder HD status screen has an information center built into it! The Info Center displays the remote start run-time remaining before the engine shuts off, as well as the vehicle interior temperature, so you know if it has warmed up or cooled off enough to make your drive comfortable. It also displays the Countdown and Parking Meter timers when running, and the Parking meter timer emits warnings at 15 minutes, 5 minutes and at expiration so you can make sure to feed the meter. Also, you can stop, start or clear these timers any time in the Status Screen using the Menu Wheel. These 4 bits of information can be displayed in the Info Center by pressing the menu wheel while the Status screen is active to toggle and show each one.
Two Car operation: when users decide to change to a paired 2nd vehicle, Responder HD will automatically check the vehicle's availability, and if the desired car is not available it will let you know. If the vehicle is available, it will automatically update the information displayed on the status screen so you know if it needs to be disarmed, or if the engine is running.
Security system Sensor Status in real-time: when arming with a security zone active, Responder HD will receive a report that will identify by name the active zone and display a special icon in the Status Screen. The report will identify all zones that are active (up to 7) by name during the report output.
NEW FEATURE: For the first time, Responder HD reports any sensors that have been bypassed by the Nuisance Prevention Circuitry (NPC™) feature when arming and have a special Sensor Status icon that is displayed in the Status Screen. Any time there is a change of status in the sensors (NPC or a bypassed zone resets,) Responder HD will receive a message from the system and the All Zones OK icon will be displayed.
Sensor Bypass: users can bypass sensors by selecting the level and sensors they wish to bypass. Responder HD will identify the bypassed sensors on-screen and by name so the user knows exactly the level of security they have chosen. After bypassing sensors, the Sensor Status icon will be updated so the user can easily see those sensors are bypassed each time the Status Screen is displayed.
Remote start Fault and Not Available reporting: if the user attempts to operate a security or remote start feature that is not available, Responder HD will identify the fault so it can be quickly resolved.
The intended use and user value of Clifford Responder HD constitute nothing less than a new higher level of connection between drivers and their vehicles. With an MSRP of $799.99, Responder HD is a new level of luxury in the world of vehicle security and convenience. From up to one mile distance from their vehicle, users can stay in constant contact using an advanced and elegant, full-color interface device: their Responder HD keychain remote.
|
Overview
Viper is proud to introduce our most affordable 2-Way security system, which will wrap your vehicle in protection, with the most sophisticated electronic technologies available today, including the Stinger® DoubleGuard® shock sensor, Revenger® six-tone siren and Failsafe® Starter Kill. This state-of-the-art system also offers in-demand convenience feature like keyless entry. Comes with one 2-Way and one 1-Way remote.
Please refer to the technology section for more information about security technologies used in this security system.
3-channel security/keyless entry system
Clone-Safe® Code-Hopping®
Parking Light Flash
Failsafe® Starter Kill
Stinger® DoubleGuard® Shock Sensor
Revenger® Six-Tone Siren
Bright Blue LED Status Indicator
Dome Light Supervision - On-Board Relay
Comfort Closure
2 Auxiliary Outputs
Includes One 2-Way and One 1-Way remote
Remote Confirmation LCD Screen
# of Remotes 1 LCD 2-Way and 1 5-button 1-Way
Range 1,500 Feet
Security Yes
Remote Start Optional
Keyless Entry Yes
SmartStart Compatible No
Encryption 66-Bit
Domelight Supervision No
Stinger DoubleGuard Shock Sensor Yes
Neo Revenger 6-Tone Siren Yes
Failsafe Starter Kill Yes
Anti-Carjacking (VRS) Yes
Guaranteed Protection Plan (GPP) Yes
Auxiliary Channels for Optional Functions 2
Remote Control Trunk Pop No
|
Progressive Door Trigger
Manual Transmission Mode
Keyless entry with optional progressive driver's unlocking and ignition-controlled locking
Virtual Tach™ RPM sensing
Onboard Flex Relays for remote start and light flash
Advanced remote start functions: Timer Start, Smart Start, RunTime Reset, and more
Inputs for doors, hood and trunk monitoring
Silent Mode alarming and disarming
New Priority™ 5-button user interface with easy 2-car operation
Warn-Away – low-volume, brief warning signal for potential threats
Revenger Soft-Chirp Six-Tone Neo Siren
Trunk Release plus 3 AUX outputs
One Mile Range with SST
D2D serial data interface for Xpresskit D2D serial data interface modules
Car Finder
Fail-Safe Starter Kill
Control Center™ with integrated Status LED and Valet Switch
XpressPort dock for Xpresskit docking serial date interface modules
Onboard Stinger Double-Guard remote-adjustable shock sensor
Ports for optional tilt, glass break, cabin and proximity sensors
FACT II – patented False Alarm Control and Test
New, slim 5-button SST 1-Way companion remote control
One Mile Range with SST
Priority™ user interface and icon map
Priority 5-button user interface
Remote can confirm commands with tones, vibration, text and icon display
Remote notifies of security intrusions with tones, vibration, text and icon display
Powerful lithium-ion rechargeable battery with mini-USB charging
Integrated text display
Tone, vibe and display notifications and confirmations
Active Temp Check – displays internal cabin temp while remote start engaged
SilentMode2 – alerts of intrusions without vehicle siren or light activation
| The Scorpio SR-i800S security system features the convenience of RFID technology allowing for hands free operation by utilizing Radio Frequency Identification Technology (RFID).
Included are a variety of features such as an integrated accelerometer, waterproof remote, built in battery back up and a built in 120 dB siren. The SR-i800S is equipped with expansion capabilities for the Ignition Disable, Perimeter Sensor. and is compatible with all of our factory style connector kits.
Additional features
· Ultra low power drain main control module (MCM)
· Battery safeguard with "sleep mode“
· Flashes signal lights
· Soft chip arming
· Programmable overide code to disarm alarm
The new SR-i800 is the perfect combination of technology, simplicity and efficiency. The kit comes with TRS-8 remote transceiver, MCM (main control module), Built In Back Up Battery, RFID antenna, universal installation kit (GEN-1), accessory harness (ACC-1), and main harness (HAR-1).
Remote Confirmation |
No |
Remotes |
1 x RFID |
Range |
N/A |
SmartStart Compability |
No |
Immobilizer |
Yes
Sold Separately |
Encryption |
High Frequency FM Tech |
Lifetime Warranty |
No (2 Years) |
|
Reviews
There are no reviews yet.