AWEI B925BL Earphones In-Ear Bluetooth Hands-free Black

19.98 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
In-ear and earhooks design, never afraid of dropping out during sports What is Headphone Sensitivity? Sensitivity works hand-in-hand with the impedance of the headphones.  They must correspond to each other because they both work hand-in-hand to regulate sound and produce clear acoustics without distortion. The sensitivity measured by dB SPL/mW. The Bigger dB, The higher the […]

 

Read more

In-ear and earhooks design, never afraid of dropping out during sports

What is Headphone Sensitivity?

Sensitivity works hand-in-hand with the impedance of the headphones.  They must correspond to each other because they both work hand-in-hand to regulate sound and produce clear acoustics without distortion. The sensitivity measured by dB SPL/mW. The Bigger dB, The higher the sensitivity rating. A high sensitivity will get a wide range of power output, but may get some distortion at the same time. Low sensitivity is harder to damage and not easy distortion, however, it need your device have more power output than high sensitivity one. Generally smart phones, tablets, and mp3 players need a earphone from 85dB to 120dB.  It should be noted that at 120 dB, the human ear begins to replace the sensation of hearing with that of pain. 

What Is Headphone Impedance?

Most earphone with low impedance (less than 25Ω) require little power to deliver high audio levels. So it can save your device power. Headphones with higher impedance (25Ω and over) demand more power. But, they are protected from damage caused by overloading. They can also be used with a wider range of audio equipment.

What Is Earphone Frequency?

Frequency response is the range of bass, mids and treble. 20 to 20,000 Hz is generally accepted as the audible frequency range, this is the standard for most headphones. Some Earphone offer wider ranges (for example, 5 to 33,000 Hz), but better frequency response does not always mean better sound quality. Below 20 Hz bass frequencies can be felt more so than heard, treble frequencies over 20,000 Hz are not always audible.

How to choose Headphones / Earphones which suit your self?

Generally, more expensive headphones are made with higher quality materials and better engineering, improving the sound quality. $10 headphones will sound good, but not as good as $30 ones. Cheaper earbuds often run into problems like falling out of ears, hurting ears, or simply making dents in them from the cheap plastic.

Neckband earphone are exactly well, This is recommended for joggers or people who wear hats a lot and also for sunglasses fanatics.

Earbuds and in-ear headphones tend to be better at sound isolation, due to the seal they provide in your ear.

You are the person who is going to be using these headphones day in day out. If a $5 pair of headphones sounds the same as a $500 pair of headphones, go for the cheaper pair. The sound quality is not going to change just because they are more expensive!

Warm Tips:

When you connect the bluetooth earphone with your device first time, You need press the button about 5-6 seconds, when you hear the Power On, still hold the button, soon you will hear Toot Sound (blue-red light flashing), then you will find AWEI MUSIC on your cellphone, Good time ! 

Features of Awei B925BL

  • Bluetooth 4.2 wireless connection up to 10 meters
  • Built-in 55mah rechargeable battery for up to 4 hours music listening while only one hour for charging
  • In-ear and earhooks design, never afraid of dropping out during sports
  • Comes with line control and microphone, you can simply answer phone call or start to listen to music operating through the earphone
  • Support power display for IOS operating system

Specifications of Awei B925BL

GENERAL
Brand Awei
Model B925BL
Color Black
Wearing type In-ear
In Sales Package Headphone, Earbuds, USB Charging cable, User Manual
TECHNICAL DETAILS
Connectivity Wireless
Talk Time 6h
Play Music Time 4h
Charging Time 1.5h
Stand by time 200h
Ambient Temperature -20±60C
Cord Length 600mm
Driver Unit 10 mm
Sensitivity 90dB ± 3dB
Impedance 16Ω ± 15%
Frequency Response 20 – 20KHz
Frequency Range 2.402G-2.480G
Plug Type USB
Noise Reduction CVC
Bluetooth
Bluetooth Yes
Bluetooth Version V4.0
Bluetooth Protocol HFP/HSP/A2DP/AVRCP
Transmission Range 10m (Barrier free space)
Warranty
Covered in Warranty Warranty of the product is limited to manufacturing defects only
Warranty Summary 6 Months Manufacture Warranty
Not Covered in Warranty Warranty does not cover any external accessories (such as battery, cable, carrying bag), damage caused to the product due to improper installation by customer, normal wear and tear to magnetic heads, audio, video, laser pick-ups and TV picture tubes, pane
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “AWEI B925BL Earphones In-Ear Bluetooth Hands-free Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

AWEI B925BL Earphones In-Ear Bluetooth Hands-free Black removePOLK AUDIO UltraFit3000 In-Ear Headphones WHITE/GREY removePOLK AUDIO UltraFit3000 In-Ear Headphones Black/Red removeMONSTER ISPORT IMMERSION In-Ear Headphones with ControlTalk BLACK removeAKG IP 2 In-Ear stereo headphone removeMONSTER Jamz In-Ear Headphones remove
NameAWEI B925BL Earphones In-Ear Bluetooth Hands-free Black removePOLK AUDIO UltraFit3000 In-Ear Headphones WHITE/GREY removePOLK AUDIO UltraFit3000 In-Ear Headphones Black/Red removeMONSTER ISPORT IMMERSION In-Ear Headphones with ControlTalk BLACK removeAKG IP 2 In-Ear stereo headphone removeMONSTER Jamz In-Ear Headphones remove
Image
SKUB925BLUltraFit3000WGUltraFit3000BRISPORT IMMERSION BLACKIP 2Jamz
Rating
Price 19.98 incl. GR VAT89.73 incl. GR VAT89.73 incl. GR VAT128.00 incl. GR VAT 74.00 incl. GR VAT 109.89 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

Available on backorder

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

In-ear and earhooks design, never afraid of dropping out during sports

What is Headphone Sensitivity?

Sensitivity works hand-in-hand with the impedance of the headphones.  They must correspond to each other because they both work hand-in-hand to regulate sound and produce clear acoustics without distortion. The sensitivity measured by dB SPL/mW. The Bigger dB, The higher the sensitivity rating. A high sensitivity will get a wide range of power output, but may get some distortion at the same time. Low sensitivity is harder to damage and not easy distortion, however, it need your device have more power output than high sensitivity one. Generally smart phones, tablets, and mp3 players need a earphone from 85dB to 120dB.  It should be noted that at 120 dB, the human ear begins to replace the sensation of hearing with that of pain. 

What Is Headphone Impedance?

Most earphone with low impedance (less than 25Ω) require little power to deliver high audio levels. So it can save your device power. Headphones with higher impedance (25Ω and over) demand more power. But, they are protected from damage caused by overloading. They can also be used with a wider range of audio equipment.

What Is Earphone Frequency?

Frequency response is the range of bass, mids and treble. 20 to 20,000 Hz is generally accepted as the audible frequency range, this is the standard for most headphones. Some Earphone offer wider ranges (for example, 5 to 33,000 Hz), but better frequency response does not always mean better sound quality. Below 20 Hz bass frequencies can be felt more so than heard, treble frequencies over 20,000 Hz are not always audible.

How to choose Headphones / Earphones which suit your self?

Generally, more expensive headphones are made with higher quality materials and better engineering, improving the sound quality. $10 headphones will sound good, but not as good as $30 ones. Cheaper earbuds often run into problems like falling out of ears, hurting ears, or simply making dents in them from the cheap plastic.

Neckband earphone are exactly well, This is recommended for joggers or people who wear hats a lot and also for sunglasses fanatics.

Earbuds and in-ear headphones tend to be better at sound isolation, due to the seal they provide in your ear.

You are the person who is going to be using these headphones day in day out. If a $5 pair of headphones sounds the same as a $500 pair of headphones, go for the cheaper pair. The sound quality is not going to change just because they are more expensive!

Warm Tips:

When you connect the bluetooth earphone with your device first time, You need press the button about 5-6 seconds, when you hear the Power On, still hold the button, soon you will hear Toot Sound (blue-red light flashing), then you will find AWEI MUSIC on your cellphone, Good time ! 

Features of Awei B925BL
  • Bluetooth 4.2 wireless connection up to 10 meters
  • Built-in 55mah rechargeable battery for up to 4 hours music listening while only one hour for charging
  • In-ear and earhooks design, never afraid of dropping out during sports
  • Comes with line control and microphone, you can simply answer phone call or start to listen to music operating through the earphone
  • Support power display for IOS operating system
Specifications of Awei B925BL
GENERAL
Brand Awei
Model B925BL
Color Black
Wearing type In-ear
In Sales Package Headphone, Earbuds, USB Charging cable, User Manual
TECHNICAL DETAILS
Connectivity Wireless
Talk Time 6h
Play Music Time 4h
Charging Time 1.5h
Stand by time 200h
Ambient Temperature -20±60C
Cord Length 600mm
Driver Unit 10 mm
Sensitivity 90dB ± 3dB
Impedance 16Ω ± 15%
Frequency Response 20 - 20KHz
Frequency Range 2.402G-2.480G
Plug Type USB
Noise Reduction CVC
Bluetooth
Bluetooth Yes
Bluetooth Version V4.0
Bluetooth Protocol HFP/HSP/A2DP/AVRCP
Transmission Range 10m (Barrier free space)
Warranty
Covered in Warranty Warranty of the product is limited to manufacturing defects only
Warranty Summary 6 Months Manufacture Warranty
Not Covered in Warranty Warranty does not cover any external accessories (such as battery, cable, carrying bag), damage caused to the product due to improper installation by customer, normal wear and tear to magnetic heads, audio, video, laser pick-ups and TV picture tubes, pane

 

 

UltraFit 3000 Technical Specifications
Style     In Ear Canal
Frequency Response     8Hz-24Khz
Sensitivity     118db
Impedance     16 ohms
Transducer Type     Dynamic Balance®
Transducer Diameter     6mm
In Line 3 button Remote Control (iPhone, iPod, iPad*)     Yes
Built-in Microphone     Yes, In-line
Input Connections     3.5mm
Approx. Weight     0.4oz (11gm)
Finishes     Black & Red, White & Orange
Parts & Labor     Warranty 1 Year
Included Cables     13.4" Round, 14" Flat, 41" Flat
Included Ear Tips     Silicon Single Flange S/M/L, Silicon Triple Flange S/L, Memory Foam S/L
Included Accessories     Nokia® Adapter, Moisture Resistant Soft Case, Shirt Clip, Quick Start Guide and Manual

 

 

UltraFit 3000 Technical Specifications
Style     In Ear Canal
Frequency Response     8Hz-24Khz
Sensitivity     118db
Impedance     16 ohms
Transducer Type     Dynamic Balance®
Transducer Diameter     6mm
In Line 3 button Remote Control (iPhone, iPod, iPad*)     Yes
Built-in Microphone     Yes, In-line
Input Connections     3.5mm
Approx. Weight     0.4oz (11gm)
Finishes     Black & Red, White & Orange
Parts & Labor     Warranty 1 Year
Included Cables     13.4" Round, 14" Flat, 41" Flat
Included Ear Tips     Silicon Single Flange S/M/L, Silicon Triple Flange S/L, Memory Foam S/L
Included Accessories     Nokia® Adapter, Moisture Resistant Soft Case, Shirt Clip, Quick Start Guide and Manual

iSport Immersion: The Athlete's Headphone by Monster
For those serious about their game or their workout, Monster delivers the ultimate high-performance sport headphone. iSport Immersion was designed to meet the specific demands of today's top athletes. It's rugged, sweatproof and totally machine washable. The Pro Sound Isolating Eartips ensure an impenetrable seal blocking out water and leaving in that deep, pulse-pounding sound.

Whether you're running, biking, or snowboarding, you'll go further and never lose focus, thanks to iSport's revolutionary in-ear SportClip design. Secure and comfortable, it won't fall out or get in the way of your goggles, glasses or helmet.

If music is what moves you, iSport Immersion is the ultimate motivator. Its advanced in-ear speaker and MicroStrand Conductors turn your tunes into pure audio adrenaline. Powerful, clear and full of detail, you're in the zone. Go ahead and dominate.

Advanced In-Ear Speaker Design with OmniTipTM
Delivers true Monster-quality sound while the OmniTipTM swivel nozzle and patented SportClip provide a no-fail fit worthy of your toughest workout.

Proprietary Waterproof Sealed Housing
Beach. Mountains. Take your iSport headphones anywhere including the laundry room. It's washable!

MicroStrand Conductors
Listen to your tunes reproduced in dramatic detail. With iSport, you'll go the distance without ever missing a beat.

Magnetic Flux TubeTM Technology
The same technology found in Monster's best speaker cables are now in the ultimate sports headphone.

24K Gold-Plated Contacts
Attractive and anti-corrosive for maximum audio signal. From now on, your favorite tracks will sound as good as gold.

Convenient Right Angle Jack
Move freely with your tangle-resistant cord and jack safely out of the way.

Protective Clasp Pouch
Tuck away your earphones when finished and carry them easily.

Pro Sound Isolating Eartips
Multiple sizes and shapes for the perfect fit blocking out sweat and noise so you can always focus on winning.

ControlTalkTM On-Cable Mic
Take the call without stopping iSport comes with convenient, hands-free calling for your iPhone or smartphone.

On-Cable Mic with controls for iPad®, iPhone® and iPod®.

What's in the box:
- iSport Immersion headphones
- 4 pairs of multiple-sized SportClips and Eartips
- Protective spring-clasp pouch

Specifications
  • Driver Size : 3.5mm
  • Frequency Response : 20Hz-20kHz
  • Warranty Description : 1 Year Limited Warranty
  • Sound Enhancements : Stereo Sound
  • Sensitivity : 100dB
  • Wired Connectivity : Headphone
  • Features Audio Headset : 3.5mm Plug, Stereo Sound, Lightweight
  • Product Weight : 0.500
  • Cable/Cord Length : 4.000
  • Magnet Type : Dynamic Neodymium
  • Electronics Model Compatibility : iPod Nano 4th Generation, iPod Classic, iPod Touch 2nd Generation
  • Accessories Included: Electronics Product : Owner's Manual, Audio Cable, Carrying Case, Protective Case
  • Impedance : 32 ohms
  • Ear Cusion: Material : Silicone

 

AKG IP2, prof. In-Ear stereo headphone, dynamic, 50 Ohm, >100dB/mW, 50mW,20-20kHz, skin coloured, 150cmcable with Stereo-Jack (3.5mm), incl. Tray

Advanced driver design for extended full range sound.
Solid, precision-machined single-billet metal housing cancels unwanted vibrations for the purest sound.
Hard chrome finish keeps headphones shinning like they did day one; no polish needed.
Rugged strain relief protects the cable and withstands heavy-duty use.
Adjustable ear hooks keeps earphones in place comfortably for active lifestyles

acrobat_reader_logo. User's Manual

Weight0.50 kg0.10 kg0.10 kg0.50 kg0.50 kg0.15 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.10 kg
Weight 0.10 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.15 kg