KRK 8-S2 Active Studio Subwoofer ( Piece )

No longer available!

279.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The 8s powered studio subwoofer builds upon KRKʼs legacy for sonic accuracy in a compact form factor. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch. The 8s powered studio subwoofer builds upon KRKʼs legacy for sonic accuracy in a compact form factor. The […]

 

Read more

The 8s powered studio subwoofer builds upon KRKʼs legacy for sonic accuracy in a compact form factor. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch.

The 8s powered studio subwoofer builds upon KRKʼs legacy for sonic accuracy in a compact form factor. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch. The four-position selectable crossover lets you adjust the subwoofer setting easily to your existing monitors. Pairing the 8s subwoofer with KRK or another studio monitor delivers an optimized mixing and listening experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. KRKʼs 8s subwoofer doesnʼt just deliver precise bass and a rich feature set: itʼs the next dimension in subwoofer performance.

 

Type: Active Subwoofer
Woofer: 8”
Midrange:
Tweeter: 1.5”
Amplifiers Power: 109W
Input/Output Plugs: XLR Left/Right, 1/4″ TRS Left/Right, RCA Left/Right, 1/4″ footswitch / XLR Left/Right, 1/4″ TRS Left/Right, RCA Left/Right
Frequency Response: 35Hz-133Hz
Εqualizer:
Dimensions (W x H x D): 33,9 mm x 29,4 mm x 36,2 mm
Weight: 11.8 kg

 

Weight 11.80 kg

Reviews

There are no reviews yet.

Be the first to review “KRK 8-S2 Active Studio Subwoofer ( Piece )”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK 8-S2 Active Studio Subwoofer ( Piece ) removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- removeYAMAHA SW-10 Studio Monitor removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -RED- removeFOCAL Sub6 ACTIVE STUDIO SUB MONITOR 300W removeEVE AUDIO TS107 ACTIVE 6.5'' SUBWOOFER 100W RMS remove
NameKRK 8-S2 Active Studio Subwoofer ( Piece ) removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- removeYAMAHA SW-10 Studio Monitor removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -RED- removeFOCAL Sub6 ACTIVE STUDIO SUB MONITOR 300W removeEVE AUDIO TS107 ACTIVE 6.5'' SUBWOOFER 100W RMS remove
Image
SKUH00KR00038TURBO 10S YELLOWH000.00083TURBO 10S REDSub6TS107
Rating
Price 279.00 incl. GR VAT711.75 incl. GR VAT 899.00 incl. GR VAT 589.00 incl. GR VAT 1,295.00 incl. GR VAT 499.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

In stock

In stock

Available on backorder

AvailabilityOut of stockAvailable on backorderIn stockIn stockIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The 8s powered studio subwoofer builds upon KRKʼs legacy for sonic accuracy in a compact form factor. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch.

The 8s powered studio subwoofer builds upon KRKʼs legacy for sonic accuracy in a compact form factor. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch. The four-position selectable crossover lets you adjust the subwoofer setting easily to your existing monitors. Pairing the 8s subwoofer with KRK or another studio monitor delivers an optimized mixing and listening experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. KRKʼs 8s subwoofer doesnʼt just deliver precise bass and a rich feature set: itʼs the next dimension in subwoofer performance.

 

Type:Active Subwoofer
Woofer: 8''
Midrange: -
Tweeter: 1.5''
Amplifiers Power: 109W
Input/Output Plugs: XLR Left/Right, 1/4" TRS Left/Right, RCA Left/Right, 1/4" footswitch / XLR Left/Right, 1/4" TRS Left/Right, RCA Left/Right
Frequency Response: 35Hz-133Hz
Εqualizer: -
Dimensions (W x H x D): 33,9 mm x 29,4 mm x 36,2 mm
Weight: 11.8 kg

 

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

 

Specifications
Frequency response : 30Hz - 250Hz
Maximum SPL : 116dB SPL (peak @ 1m)

Input :

Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable

Outputs (towards speakers) : Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug

Amplification :

350W rms, BASH® technology

Signal internal treatment :

Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave

Electric supply :

Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass

warning light : Power on LED, Subwoofer switch (mute), Released high-pass

Electric supply :

Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire

Subwoofer : 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body.

Dimensions (HxWxD) : 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm)
Weight : 50.7lb (23kg)

 

7" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS107 is the smallest model in the range of EVE Audio subwoofers and features a very efficient 100W PWM amplifier that drives a proprietary 6.5" woofer. This guarantees a frequency response of down to 36Hz up to 300 Hz, for a maximum output power of 102 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS107
Description Subwoofer
Dimensions (WxHxD) [mm] 230 x 355 x 300
Dimensions (WxHxD) [“] 9.06 x 13.98 x 11.81
Free-field frequency range (-3dB) 36Hz - 300Hz
Woofer 165mm/6.5“
Maximum SPL @ 1m 102dB
Number of amplifiers 1
Total short-term output power 100W
Protection limiter YES
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch YES
Filter-lock dip switch YES
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 120VA
Misc.
Weight kg/lb. 8.2 / 18.1
Weight11.80 kg22.40 kg26.50 kg22.40 kg23.00 kg8.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.80 kg
Weight 22.40 kg
Weight 26.50 kg
Weight 22.40 kg
Weight 23.00 kg
Weight 8.20 kg