Content | Woofer 15“ X77-61500-43966 for the speakers B215, B215D, B1520 and more.
Brand |
BEHRINGER |
Model |
LS-15W1000A8 |
Part Number |
X77-61500-43966 |
Application |
Portable PA |
Sparepart / Accessories Type |
Speaker |
Category |
Woofer |
|
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
| High efficiency 15" woofer with a very flat frequency
response up to 2 kHz and high power handling (800W). Good
LF performance, smooth voice response, and compatibility
with compact bass-reflex enclosures, the 15 PK 40 achieves
perfect balance in two-way systems.
Specifications
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 Ω
Minumum Impedance 6.2 Ω
Power Handling
(50 –500 Hz)
Nominall 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 50-2000 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 16 mm (5/8 in)
Magnetic Gap Depth 9 mm (11/32 in)
Flux Density 1.1 T
Thiele & Small Parameters4
Fs 47 Hz
Re 5.1 Ω
Qes 0.33
Qms 5.1
Qts 0.31
Vas 140 dm3 (4.9 ft3)
Sd 855 cm2 (132.5 in2)
η0 4.2%
X max ± 4 mm
X var ± 6 mm
Mms 84 g
Bl 19.7 T·m
Le 2.3 mH
Mounting and Shipping Information
Overall Diameter 394 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.6 in)
Baffle Cutout Diameter 355 mm (13.9 in)
Depth 162 mm (6.4 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 8.3 kg (18.3 lb)
Shipping Weight 9.6 kg (21.1 lb)
Shipping Box 450x450x200 mm
(17.7x17.7x8 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test. |
Nominal diameter | 15in/381mm | Power Rating | 400W | Sensitivity | 98dB | Frequency Range | 42-3500Hz | Voice coil
diameter | 3in/76.2mm | Magnet type | Neodymium | Weight | 2.6kg/5.7lb |
| |
Neodymium coaxial speaker with 15" woofer, 8Ω, 400W Nominal, 800W continuous, 99dB (1W/1m) and horn 80W Nominal, 160W continuous, 105dB (1W/1m), response frequency 40-18000Hz, dispersion 80 degrees, 5,6Kg.
800 W continuous program power capacity |
|
80° nominal coverage |
|
40 – 18000 Hz response |
|
99 dB sensitivity |
|
Single Neodymium magnet assembly
Nominal Diameter |
380 mm (15 in) |
Nominal Impedance |
8 ohm |
Minimum Impedance |
6.0 ohm (LF) 8.0 ohm (HF) |
Frequency Range |
40 - 18000 Hz |
Dispersion Angle |
80° |
LF Unit |
|
Sensitivity (1W/1m) |
99 dB |
Nominal Power Handling |
400 W |
Continuous Power Handling |
800 W |
Voice Coil Diameter |
76 mm (3 in) |
Winding Material |
Copper |
HF Unit |
|
Sensitivity (1W/1m) |
105 dB |
Nominal Power Handling |
80 W |
Continuous Power Handling |
160 W |
Voice Coil Diameter |
75 mm (3 in) |
Winding Material |
Aluminium |
Diaphragm Material |
Polyester/Titanium |
Recom. Crossover |
1.2 kHz |
Overall Diameter |
393 mm (15.5 in) |
Bolt Circle Diameter |
374 mm (14.7 in) |
Baffle Cutout Diameter |
353 mm (13.9 in) |
Depth |
198 mm (7.8 in) |
Flange and Gasket Thickness |
16 mm (5/8 in) |
Net Weight |
5.6 kg (12.3 lb) |
Shipping Weight |
7.0 kg (15.4 lb) |
Shipping Box |
450x450x290 mm (17.7x17.7x11.4 in) |
|
|
Reviews
There are no reviews yet.