| Content | Woofer 15" for the speakers B115D, B115MP3, B115W.
| Brand |
BEHRINGER |
| Model |
LS-15W600C8 |
| Part Number |
X77-00000-40833 |
| Application |
Portable PA |
| Sparepart / Accessories Type |
Speaker |
| Category |
Woofer |
| Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
160 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
96 dB
Frequency response
42 - 3200 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
39 Hz
Re (DC resistance)
6.11 Ohm(s)
Qms (mechanical quality)
6.3
Le (inductance of the voice coil)
1.37 mH
Qes (electrical quality)
0.52
Qts (overall quality)
0.48
Vas (equivalent volume)
241
Mms (moving mass)
75 g
BL (power factor)
14.6 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.23 mm/N
Sd (membrane area)
873 cm²
Weight
6,449 kg |
| 1400 W continuous program power capacity |
|
| 100 mm (4 in) copper voice coil |
|
| 35 – 2000 Hz response |
|
| 97 dB sensitivity |
|
| Double silicone spider with optimized compliance |
|
Neodymium coaxial speaker with 15" woofer, 8Ω,
400W Nominal, 800W continuous, 99dB
(1W/1m) and horn 80W Nominal, 160W
continuous, 105dB (1W/1m), response
frequency 40-18000Hz, dispersion 80 degrees,
5,6Kg.
| 800 W continuous program power capacity |
|
| 80° nominal coverage |
|
| 40 – 18000 Hz response |
|
| 99 dB sensitivity |
|
|
Single Neodymium magnet assembly
| Nominal Diameter |
380 mm (15 in) |
| Nominal Impedance |
8 ohm |
| Minimum Impedance |
6.0 ohm (LF)
8.0 ohm (HF) |
| Frequency Range |
40 - 18000 Hz |
| Dispersion Angle |
80° |
| LF Unit |
|
| Sensitivity (1W/1m) |
99 dB |
| Nominal Power Handling |
400 W |
| Continuous Power Handling |
800 W |
| Voice Coil Diameter |
76 mm (3 in) |
| Winding Material |
Copper |
| HF Unit |
|
| Sensitivity (1W/1m) |
105 dB |
| Nominal Power Handling |
80 W |
| Continuous Power Handling |
160 W |
| Voice Coil Diameter |
75 mm (3 in) |
| Winding Material |
Aluminium |
| Diaphragm Material |
Polyester/Titanium |
| Recom. Crossover |
1.2 kHz |
| Overall Diameter |
393 mm (15.5 in) |
| Bolt Circle Diameter |
374 mm (14.7 in) |
| Baffle Cutout Diameter |
353 mm (13.9 in) |
| Depth |
198 mm (7.8 in) |
| Flange and Gasket Thickness |
16 mm (5/8 in) |
| Net Weight |
5.6 kg (12.3 lb) |
| Shipping Weight |
7.0 kg (15.4 lb) |
| Shipping Box |
450x450x290 mm
(17.7x17.7x11.4 in) |
|
|
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
|
| 1400 W continuous program power capacity |
| | 100 mm (4 in) copper voice coil |
| | 40 – 2000 Hz response |
| | 97 dB sensitivity |
| | Double silicone spider with optimized compliance |
|
Reviews
There are no reviews yet.