Content |
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function |
Four channel expander/gate |
Number of Channels |
4 |
Inputs |
4 x XLR, 4 x TRS 1/4" phone |
Output |
4 x XLR, 4 x TRS 1/4" phone |
Maximum Input Level |
+21dBu |
Compression Threshold |
Not applicable |
Compression Ratio |
Not applicable |
Attack Time |
Not applicable |
Release Time |
Not applicable |
Gate Threshold |
0 to -80dB |
Gate Rate |
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable |
Maximum Output Level |
+21dBu |
Make-up Gain |
Not specified by manufacturer |
Frequency Response |
18HZ to 30kHz |
Dynamic Range |
Not specified by manufacturer |
Noise |
>95dBu, unweighted, 22Hz to 22kHz |
Dimensions |
1U rack mount, 8 1/2" deep |
Specialties |
Unit will operate at either +4dB or -10 dB |
|
The dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones. It will transform their low level output signal to a high level, high current output for direct connection to the line level inputs of your mixer, sampler or any other recording medium that accepts line level, analog input. | The Soundweb London BLU-DAN offers Dante audio and BLU link. This means that the BLU-DAN can be used to ‘add’ Dante to one or more BLU link devices.
The BLU-DAN is configurable through HiQnet Audio Architect. A rich palette of logic objects and a "drag and drop" method of configuration provide a simple and familiar design environment.
The BLU-DAN features Dante audio. The BLU-DAN is capable of simultaneously transmitting and receiving up to 64 channels of Dante audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port.
The BLU-DAN also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.
The BLU-DAN and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
- AES67 and Dante Audio with support for Dante Domain Manager
- BLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
- ‘Add’ Dante / AES67 to one or more BLU link devices
- Clear Front Panel LED Indication
- Bi-Directional Locate Functionality
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet Audio Architect
- 1RU, Half-Rack Device
- AES67 Compatible
- EN 54-16 Compliant for life safety applications
*The price is without VAT
|
Product Features: 16-channel digital stereo mixer to create your personal monitor mix Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes State-of-the-art 24-bit D/A converters for premium audio quality 16 Channel Select buttons with dual LEDs for perfect overview Level and Pan/Spread control per channel with LED meter 3-band EQ per channel with mid-band frequency control Solo and Mute functions per channel Global Level and EQ controls plus Panic Mute function High power and \"drummer proof\" headphones output Fully adjustable limiter protects your ears and headphones Additional mono/stereo line output to connect your powered monitor MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc. Standard CAT5e connection delivers power and 16 signals to each Personal Mixers ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D) Ultra-low system latency of less than 1 millisecond Powered via external power supply (included) or P16-I / P16-D Mounts easily on a mic stand with the P16-MB mic stand mount (not included) Extremely rugged construction ensures long life even under the most demanding conditions Conceived and designed by BEHRINGER Germany
User\'s Manual |
The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.
The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.
Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.
Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.
Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Key Features:
• 12 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• Configurable Signal Processing
• 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect |
An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
Features |
---|
3 Music Source Inputs individually selectable to each output | One Input Source with Override facility (Jukebox or Auto Announcer) | 5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones | Can be expanded interlink of two or more MS520 units | Inbuilt 20W into 4 Ohms 5 channel Amplifiers (1 Stereo – 3 Mono Option) | Direct Inputs and Outputs on each zone | Paging or Alarm Input Override System | Full Digital Matrix control of functions to all 5 zones | Up to 10 remote control panels RC 62 can be connected to each MS 520 |
AMPLIFIER SPECIFICATIONS |
---|
Power output: | 5 x 20 | Watt rms | Frequency Response (Music): | 30 ÷ 45 | Hz ÷ kHz | Frequency Response (Direct): | 30 ÷ 45 | Hz ÷ kHz | Frequency Response (Paging): | 200 ÷ 18 | Hz ÷ kHz | Distortion: | 0.5 | % | Signal / noise ratio (Music): | -78 | dB | Signal / noise ratio (Direct): | -78 | dB | Signal / noise ratio (Paging): | -60 | dB |
INPUT SECTION |
---|
Input sensitivity (Music): | -16 | dBu | Input sensitivity (Direct): | -16 | dBu | Input sensitivity (Paging - Line): | - 43 ÷ -27 | dBu | Input sensitivity (Paging - Mic): | - 58 ÷ -41 | dBu | Bass Tone: | (100 kHz) ± 8 | dB | Treble Tone: | (12.5 kHz) ± 8 | dB |
OUTPUT SECTION |
---|
Out level: | -6 / -10 | dB | Protections: | Short ciurcuit, thermal, AC / DC fuses | | Power supply: | 16 | V dc |
POWER REQUIREMENT |
---|
Operating voltage: | 220÷240 / 110÷120 V ~ 50 / 60 Hz | V ~ Hz | Power (consumption): | 370 | W | Max. Available power: | 100 | W |
PHISICAL SPECIFICATION |
---|
Width: | 438 / 17.24 | mm/inch | Height: | 44 / 1.73 | mm/inch | Depth: | 253 / 9.96 | mm/inch | Net Weight: | 3.66 / 8.06 | Kg/Lbs |
SHIPPING INFORMATION |
---|
Package height: | 75 / 2.95 | mm/inch | Package width: | 520 / 20.47 | mm/inch | Package depth: | 280 / 11.02 | mm/inch | Shipping Weight: | 4.18 / 9.21 | Kg/Lbs |
|
Reviews
There are no reviews yet.