Behringer MULTIGATE PRO XR4400 Quad Expander/Gate

145.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction. The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts […]

 

Read more

The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.

The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.

A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.

Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\’sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4″ TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring

Function Four channel expander/gate
Number of Channels 4
Inputs 4 x XLR, 4 x TRS 1/4″ phone
Output 4 x XLR, 4 x TRS 1/4″ phone
Maximum Input Level +21dBu
Compression Threshold Not applicable
Compression Ratio Not applicable
Attack Time Not applicable
Release Time Not applicable
Gate Threshold 0 to -80dB
Gate Rate Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable
Maximum Output Level +21dBu
Make-up Gain Not specified by manufacturer
Frequency Response 18HZ to 30kHz
Dynamic Range Not specified by manufacturer
Noise >95dBu, unweighted, 22Hz to 22kHz
Dimensions 1U rack mount, 8 1/2″ deep
Specialties Unit will operate at either +4dB or -10 dB
Weight 3.20 kg

Reviews

There are no reviews yet.

Be the first to review “Behringer MULTIGATE PRO XR4400 Quad Expander/Gate”

Your email address will not be published. Required fields are marked *

Quick Comparison

Behringer MULTIGATE PRO XR4400 Quad Expander/Gate removeWORK WDR 24 Wireless digital audio receiver removeBSS BLUCARD-IN 4 analog input mic/line card for Soundweb removeBEHRINGER P16-I INPUT MODULE WITH ANALOG AND ADAT OPTICAL INPUTS removeWORK WDT 24 Wireless digital audio transmitter removeBSS Z-BLU102 Signal Processor remove
NameBehringer MULTIGATE PRO XR4400 Quad Expander/Gate removeWORK WDR 24 Wireless digital audio receiver removeBSS BLUCARD-IN 4 analog input mic/line card for Soundweb removeBEHRINGER P16-I INPUT MODULE WITH ANALOG AND ADAT OPTICAL INPUTS removeWORK WDT 24 Wireless digital audio transmitter removeBSS Z-BLU102 Signal Processor remove
Image
SKUE005394WDR 24Z-BLUCARD-INE005330WDT 24Z-BLU102
Rating
Price 145.00 incl. GR VAT 94.85 incl. GR VAT 384.39 incl. GR VAT 248.00 incl. GR VAT 94.85 incl. GR VAT 3,609.32 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

In stock

In stock

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.

The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.

A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.

Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring

Function Four channel expander/gate
Number of Channels 4
Inputs 4 x XLR, 4 x TRS 1/4" phone
Output 4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level +21dBu
Compression Threshold Not applicable
Compression Ratio Not applicable
Attack Time Not applicable
Release Time Not applicable
Gate Threshold 0 to -80dB
Gate Rate Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable
Maximum Output Level +21dBu
Make-up Gain Not specified by manufacturer
Frequency Response 18HZ to 30kHz
Dynamic Range Not specified by manufacturer
Noise >95dBu, unweighted, 22Hz to 22kHz
Dimensions 1U rack mount, 8 1/2" deep
Specialties Unit will operate at either +4dB or -10 dB
WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system. The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
  • Wireless Digital Audio Receiver System
  • Operating Band ISM 2.4GHz (free band).
  • One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
  • GFSK digital modulation/demodulation.
  • External antenna can help to increase the transmission distance.
  • Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
  • Automatic mute in bad channel quality conditions or high error code rate.
  • Transmission distance higher than 30 meters in open places.
  • Up to three transmitters WDT 24 in a zone
  • Balanced XLR and unbalanced ¼\'\' jack outputs
  • Working mode: stereo or mono
Power Supply AC 9V-500 mA 50/60 Hz
Frequency 2404-2476MHz
Channel 25
Modulation/Demodulation GFSK
Receive Sensitivity (WDR 24) -84dBm (min.)
Transmitted Power (WDT 24) 6 dBm
Output Level (WDR 24) +13dBu (BAL max.)
Input Level (WDT 24) +5dBu (max.)
Bandwidth >=1.8 MHz
Frequency Response 20Hz - 20kHz, +3dB / -3dB
S/N >80 dB
Dynamic Range @ 1 kHz >90 dB
Crosstalk @ 1kHz >90 dB
THD

mic/line for the BLU-80, BLU-32, BLU-16.

Product Features:

    16-channel digital stereo mixer to create your personal monitor mix
    Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes
    State-of-the-art 24-bit D/A converters for premium audio quality
    16 Channel Select buttons with dual LEDs for perfect overview
    Level and Pan/Spread control per channel with LED meter
    3-band EQ per channel with mid-band frequency control
    Solo and Mute functions per channel
    Global Level and EQ controls plus Panic Mute function
    High power and \"drummer proof\" headphones output
    Fully adjustable limiter protects your ears and headphones
    Additional mono/stereo line output to connect your powered monitor
    MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc.
    Standard CAT5e connection delivers power and 16 signals to each Personal Mixers
    ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D)
    Ultra-low system latency of less than 1 millisecond
    Powered via external power supply (included) or P16-I / P16-D
    Mounts easily on a mic stand with the P16-MB mic stand mount (not included)
    Extremely rugged construction ensures long life even under the most demanding conditions
    Conceived and designed by BEHRINGER Germany

 User\'s Manual

WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.

The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.

  • Wireless Digital Audio Transmitter System
  • Operating Band ISM 2.4GHz (free band).
  • One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
  • GFSK digital modulation/demodulation.
  • External antenna can help to increase the transmission distance.
  • Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
  • Automatic mute in bad channel quality conditions or high error code rate.
  • Transmission distance higher than 30 meters in open places.
  • Up to three transmitters WDT 24 in a zone
  • Balanced XLR and ¼\'\' jack inputs.
  • Working mode: stereo or mono
Power Supply AC 9V-500 mA 50/60 Hz
Frequency 2404-2476MHz
Channel 25
Modulation/Demodulation GFSK
Receive Sensitivity (WDR 24) -84dBm (min.)
Transmitted Power (WDT 24) 6 dBm
Output Level (WDR 24) +13dBu (BAL max.)
Input Level (WDT 24) +5dBu (max.)
Bandwidth >=1.8 MHz
Frequency Response 20Hz - 20kHz, +3dB / -3dB
S/N >80 dB
Dynamic Range @ 1 kHz >90 dB
Crosstalk @ 1kHz >90 dB
THD

The Soundweb London BLU-102 offers a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.

The RJ-11 port enables the BLU-102 to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.

The BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-102 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-102 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Key Features:
• 10 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• RJ-11 Telephone Input/Output Port
• Configurable Signal Processing
• 8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

Weight3.20 kg450.00 kg1.00 kg2.10 kg0.50 kg4.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.20 kg
Weight 450.00 kg
Weight 1.00 kg
Weight 2.10 kg
Weight 0.50 kg
Weight 4.10 kg

FREE SHIPPING THROUGHOUT GREECE

for purchases over 99€ and up to 50kg
For remote areas and islands, the shipping expenses are till the first transshipment

Artsound Newsletters

Be the first to get our exclusive offers
© 2024 Artsound and Lights. All rights reserved.
Click outside to hide the comparison bar
Compare