The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction. The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts […]
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\’sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4″ TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function
Four channel expander/gate
Number of Channels
4
Inputs
4 x XLR, 4 x TRS 1/4″ phone
Output
4 x XLR, 4 x TRS 1/4″ phone
Maximum Input Level
+21dBu
Compression Threshold
Not applicable
Compression Ratio
Not applicable
Attack Time
Not applicable
Release Time
Not applicable
Gate Threshold
0 to -80dB
Gate Rate
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable
Maximum Output Level
+21dBu
Make-up Gain
Not specified by manufacturer
Frequency Response
18HZ to 30kHz
Dynamic Range
Not specified by manufacturer
Noise
>95dBu, unweighted, 22Hz to 22kHz
Dimensions
1U rack mount, 8 1/2″ deep
Specialties
Unit will operate at either +4dB or -10 dB
Weight
3.20 kg
Reviews
There are no reviews yet.
Be the first to review “Behringer MULTIGATE PRO XR4400 Quad Expander/Gate” Cancel reply
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function
Four channel expander/gate
Number of Channels
4
Inputs
4 x XLR, 4 x TRS 1/4" phone
Output
4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level
+21dBu
Compression Threshold
Not applicable
Compression Ratio
Not applicable
Attack Time
Not applicable
Release Time
Not applicable
Gate Threshold
0 to -80dB
Gate Rate
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable
Maximum Output Level
+21dBu
Make-up Gain
Not specified by manufacturer
Frequency Response
18HZ to 30kHz
Dynamic Range
Not specified by manufacturer
Noise
>95dBu, unweighted, 22Hz to 22kHz
Dimensions
1U rack mount, 8 1/2" deep
Specialties
Unit will operate at either +4dB or -10 dB
WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
Wireless Digital Audio Transmitter System
Operating Band ISM 2.4GHz (free band).
One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
GFSK digital modulation/demodulation.
External antenna can help to increase the transmission distance.
Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
Automatic mute in bad channel quality conditions or high error code rate.
Transmission distance higher than 30 meters in open places.
Up to three transmitters WDT 24 in a zone
Balanced XLR and ¼\'\' jack inputs.
Working mode: stereo or mono
Power Supply
AC 9V-500 mA 50/60 Hz
Frequency
2404-2476MHz
Channel
25
Modulation/Demodulation
GFSK
Receive Sensitivity (WDR 24)
-84dBm (min.)
Transmitted Power (WDT 24)
6 dBm
Output Level (WDR 24)
+13dBu (BAL max.)
Input Level (WDT 24)
+5dBu (max.)
Bandwidth
>=1.8 MHz
Frequency Response
20Hz - 20kHz, +3dB / -3dB
S/N
>80 dB
Dynamic Range @ 1 kHz
>90 dB
Crosstalk @ 1kHz
>90 dB
THD
AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
Optional X-Video expansion card to provide master video sync generator
Realtime format conversion between all digital formats
Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
Three stage Termination Sensing for each word clock output
INPUTS
2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
S/PDIF optical on TOS-LINK 44.1-48k
S/PDIF coaxial on RCA 44.1-192k
ADAT 44.1-48k
ADAT/SMUX II for 88.2-96k
ADAT/SMUX IV for 176.4-192k
Word Clock BNC 44.1 –192k
Video
Optional video sync (X-Video card)
OUTPUTS
2 x AES-EBU on XLR single or double wide 44.1-192k
S/PDIF coaxial 44.1-192k
S/PDIF optical on TOS-LINK 44.1-48k
6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
ADAT
SMUX II
SMUX IV
Optional video sync (X-Video card)
SPECS
Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
Video: PAL/NTSC/60Hz
"SuperClock" (256fs)
Pull up/down 0.1% and 4% from any sample rate
Apogee´s new Ultra Low Jitter C777 clock
Three stage termination indicator (under/correct/over) on each
Word Clock output:
"SureLock" technology for drop out prevention
4 digit numeric true sample rate indication
Universal power: 15 W 90-250 VAC 50-60 HZ
Connection:
Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
Operating System:
Mac and Windows
Κάρτα τεσσάρων εξόδων line για τα BLU-80, BLU-32, BLU-16.
mic/line for the BLU-80, BLU-32, BLU-16.
Wireless 5.8 GHz Stereo Receiver
For wireless transmission of a stereo audio signal together with the
Maximum range: 30 m
One transmitter can be paired with up to 8 receivers
Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
Volume control
Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.