BEHRINGER AMP800 Ultra-Compact 4-Channel Stereo Headphone Amplifier

Behringer AMP-800 Ultra-Compact 4-Channel Stereo Headphone Amplifier

Get this ultra-compact but ultra-flexible headphone amplifier system, and you will absolutely love it! It boasts 4 totally independent stereo high-power amplifier sections. The highest sonic quality with virtually all types of headphones is assured even at maximum volume levels. You can use the phones level control plus the accurate 6-digit LED output meter per channel for easy level monitoring. There are 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers. An accurate 6-digit LED main input meter is provided for precise level indication of both line inputs. Dual headphone outputs on each channel on front and rear panel allow for connecting a total of 8 headphones at the same time. A parallel Link Output enables cascading several headphone amplifiers. Long-term reliability is guaranteed with the high-quality potentiometers and illuminated switches, and our ultra low-noise audio operational amplifiers offer outstanding sound performance. In addition, all Mini Series models can be stacked on top of each other to create an ultra-compact signal processing solution.

Highest sonic quality with virtually all headphone types is a sure thing!

• Ultra-compact 9.5" headphone amplifier system for studio and stage applications
• 4 totally independent stereo high-power amplifier sections
• Highest sonic quality with virtually all types of headphones even at maximum volume
• Phones Level control plus accurate 6-digit LED output meter per channel for easy level monitoring
• 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers
• Accurate 6-digit LED main input meter for precise level indication of both line inputs
• Dual headphone outputs on each channel on front and rear panels allow a total of 8 headphones to be connected at the same time
• Parallel Link Output allows cascading of several headphone amplifiers
• High-quality potentiometers and illuminated switches for long-term reliability
• Ultra low-noise audio operational amplifiers offer outstanding sound performance
• All Mini Series models can be stacked on top of each other to create an ultra-compact signal processor solution
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

The AMP800 features four totally independent stereo high-power amplifier sections, each with dual outputs. You can use the phones level control plus the accurate 6-digit LED output meter per channel for easy level monitoring. There are 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers.

• Distributes the signal of 1 audio source to 4 sets of headphones
• 4 channels with separate level controls and headphone outputs
• All connections via 6.3 mm (1/4“) jacks
• Operation via supplied power unit

The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

• Model Name: LDHPA1
• Product Type: headphone amplifier
• Type: 1-channel stereo
• Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
• Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
• Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
• Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
• Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
• Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
• Headphone Outputs: 1
• Headphone Output Connectors: 3.5 mm stereo jack
• Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
• Minimal Connected Impedance per Channel: 16 ohms
• Frequency Response: 20 Hz - 40,000 Hz
• THD 1 kHz Sine: 0.04%
• Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
• Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
• Power Supply: 9 V DC block battery, DC jack
• Operating Voltage: 9 V DC
• Power Consumption: Nom. 70 mA / Max. 150 mA
• Housing Material: plastic
• Housing Surface: soft-touch
• Housing Colour: black
• Width: 80 mm
• Height: 42.5 mm
• Depth: 133 mm
• Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable

• Ultra-compact monitor headphone amplifier for studio and stage applications
• Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
• Flexible Mic In and Mic Through connectors plus Ground Lift switch
• Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch

• High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
• DC 12 Vadapter included
• 3-Year Warranty Program*
• Designed and engineered in Germany