Behringer TD-3-BK Analogue Bass Line Synthesiser

• Fully analogue signal path from VCO, VCF and VCA
• VCO switchable between sawtooth and rectangular waveform
• 4 Pole low pass filter with resonance
• Adjustable VCF envelope intensity and envelope decay
• Adjustable accent
• Integrated distortion with tone control
• 16-Step sequencer with 250 pattern memories
• Poly-chain up to 16 devices
• Audio input for sound processing external sources: 3.5 mm jack
• Sync In & CV/Gate Outputs: 3.5 mm jack
• Stereo headphone output: 3.5 mm jack
• Line output: 6.3 mm jack
• USB-MIDI and MIDI In/Out
• Dimensions (H x W x D): 56 x 305 x 165 mm
• Weight: 0.8 kg
• Colour: Black
• Power adapter included (9 V DC)

Analog Physical Modeling Engine with multiple synthesis and oscillator types, Each oscillator type has flexible LFO and ADSR routing plus unique Texture and Mod controls that work as follows:
Multi-saw Texture, control adds sub-oscillator Mod, layers multiple sawtooth waves Pulse Texture, changes pitch of 2nd square wave Mod, change pulse width Oscillator Sync Texture, changes pitch and tone of OSC2 Mod, sets pitch change amount Ring Modulation Texture, changes pitch of OSC1 Mod, changes pitch of OSC2 Frequency Modulation Texture, sets Modulation amount Mod, changes pitch of the Modulator

?Onboard effects processor with five types add depth to your sound The effect types are: OFF (effect bypass,) Delay, VCM Phaser, VCM Chorus/Flanger and Distortion ?8-note polyphony allows complex chords and pads or switch to mono Mode for fat synth bass or solo leads

Bass Station II is an analogue mono-synth based on the classic original Bass Station but re-worked for the 21st century. It has two filters, two oscillators plus a third sub-oscillator, patch save and a fully analogue effects section. Add a step sequencer, arpeggiator, full sized keys and a powerful modulation section and you have the makings of a synth that is built for bass, but capable of so much more.

• Osc 1
• Osc 2
• Sub Osc (3)
• Noise generator

Osc 1 & 2

Select between waveforms:

• sine
• triangle
• sawtooth
• square/variable pulse width

Features

• Sync 1 & 2
• Detune 
• Octave range
• Pitch bend
• Pitch modulation from Mod Envelope and/or LFO 1
• Pulse width modulation from Mod Envelope and/or LFO 2

Sub Osc (3) which is tracked to Osc 1

Select independently between waveforms:

• Sine
• Square
• Narrow pulse

Features

• All modulation and tuning tracked to Osc 1
• Independent octave select 

• Osc 1 level
• Osc 2 level
• Sub Osc level
• Noise generator level
• Ring modulation depth
• External signal level

Two filter types

• Acid type (diode ladder filter design)
• Classic type (derived from original Bass Station)

Features

• Cutoff
• Resonance
• Overdrive
• Filter frequency to Mod Envelope depth
• Filter frequency to LFO 2 depth

Select 'Classic' filter between:

• Low pass
• Band pass
• High pass
• 12dB slope
• 24dB slope

Two ADSR Envelopes  (Attack/Decay/Sustain/Release)

• Amp Envelope
• Mod Envelope
• Combined control of both Envelopes

Select triggering mode between:

• Single trigger (holds envelope state when new note is played)
• Multi trigger (re-triggers with every new note played)
• Autoglide (engages portamento) 

There is also a VCA limiter

Two LFOs each selectable between:

• Triangle
• Sawtooth
• Square
• Sample and hold
• Both LFOs independently adjustable between rate and delay time
• Key sync LFO 1 & 2
• LFO slew on LFO 1& 2 (low pass filter on the LFO waveform)

• Distortion send
• Oscillator filter mod amount (FM effect created by Oscillator 2 modulating filter freq)
   

Arpeggiator

• Up to 32 different patterns
• Select between 1-4 octave range
• Swing function
• Select direction:
• up
• down
• up / down 1
• up / down 2
• As played
• Random
• Latch (hold the arpeggiator)

Step Sequencer

• Up to four sequences
• Assign one of 32 preset rhythms or create your own
• insert rests or legato (slide)
• Sequencer re-trigger function

• Adjust glide time
• Single trigger or re-trigger modes
• Integrate into step sequencer and arpeggiator

• 25 note synth-action keyboard
• Aftertouch can be assigned to modulate:
• Filter frequency
• LFO 1to Osc pitch
• Osc 2 speed
• Pitch wheel
• Modulation wheel can be assigned to:
• LFO 2 to filter frequency
• LFO 1 to Osc pitch
• Osc 2 pitch
• Octave up/ down buttons
• 64 factory presets
• 64 slots for user patches (and patch dump facility for storing more)
• Master volume dial

• USB MIDI (for connecting & powering Bass Station II via host computer)
• Mono output on 1/4" TRS jack
• Headphone output on 1/4" TRS jack
• External input on 1/4" TRS jack
• Sustain pedal input on 1/4" TS jack
• MIDI IN / MIDI OUT ports on 5 pin din
• DC power input
• Switch between power off / DC powered / bus powered

• 18" wide x 10.75" deep x 3" tall

With the KROSS, the sounds and songs that you've created at home and the system that you use every day can go with you onto the stage or into the street! Featuring rich sounds that exceed its class, yet remaining highly portable, the KROSS is designed for practical usability. There's a convenient mic input and a built-in audio recorder, and it can run on 6 x AA batteries. It's a distinctive new standard in music workstations, with specs and style that set it apart from all others.

• Stylish and distinctive red and black two-tone color design
• The lightweight body is only 4.3 kg/9.5 lbs
• Can be powered by 6x AA batteries
• Piano, electric piano, and drum sounds that exceed its class
• A wide variety of sounds that utilize twice as much PCM memory as previous instruments, and meet the needs of a broad range of musical styles
• Sound Selector makes it easy to find the sound you're looking for
• Favorites function lets you register 64 selected sounds or audio songs for one-touch access - a great feature for live performances
• Pro-quality EDS-i sound engine built-in, with a total of seven effects available for simultaneous use
• External input jacks allow a mic or external audio source to be directly connected.
• Quick Layer/Split function for on-the-fly versatility
• Stereo audio recorder allows you to record and overdub your performances and vocals
• Step sequencer inherited from the Electribe, a 16-track MIDI sequencer, a drum track, and an arpeggiator
• Connects to your computer via USB for plug-in integration with your favorite DAW

The Korg PaAS Optional Speaker System for Pa3X is an optional speaker system for the Pa3X series keyboards. The speaker mounts on top of the keyboard, and uses Korg's proprietary Easy Connect System for a cable-free connection. Use the PaAS speaker system to deliver hi-fidelity audio at home or for monitoring applications on stage.

Synthesizer workstation with 61 dynamic keys with aftertouch, Vast sounds composition method, sampler 128ΜΒ, compatible with AKAI - ROLAND - WAV -ENSONIQ - AIFF samples, 192 generators, KDFX professional digital multieffect unit, KB3 organ, 32 channels sequencer, arpeggiator, compatible with GM, smart media slot, pitch-bend & modulation wheels, midi in/out.