Content | What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. The amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means our Class-D amps don't need massive heat sinks, and that means we can make them lighter. Plus B1200D's amplifier provides all the dynamic punch and fidelity you'd expect from a much larger, more expensive subwoofer.
Custom-Designed Transducers
The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we never cut corners, and we never just grab whatever happens to be on the shelf. We custom-design our own so they are the perfect match for both the amplifier and the application. We wind our own voice coils, process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components. The 12" long-excursion, low-frequency transducer was designed specifically for use in the EUROLIVE B1200D.
Take Control
The B1200D features balanced XLR inputs and outputs, as well as balanced XLR Thru jacks for connecting additional enclosures. A Boost Frequency knob lets you boost any frequency between 45 Hz and 90 Hz. Then just flick the Boost switch to give your selected frequency a +10 dB boost. We've also provided a High Cut dial that controls the upper-corner frequency for the internal amplifier without affecting Thru A/B signals. A Level knob controls the input gain, and the Phase switch reverses the output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance including power, signal present and input overloads.
Product Features:
- High-performance 500-Watt powered subwoofer for PA applications
- Powerful 12'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
- Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact
- State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
- Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
- Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
- Variable High Cut control for perfect sound alignment
- Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
- Power, Signal and Clip LEDs for perfect monitoring
- Intelligent limiter for maximum sound performance and woofer protection
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Pole socket for mounting with commercial spacer poles
- Ergonomically shaped handles for easy transport
- Rugged steel grill for optimal speaker protection
- High-quality components and exceptionally rugged construction ensure long life
|
Power for the sub, power for satellites and a thumping low end speaker. Smart design. Order today.
The 1,000-Watt INSPIRE iP12B powered subwoofer produces high levels of low-end punch with definition and clarity typical of larger systems. Equipped with a dedicated 600-Watt Class-D amplifier for the 12" long-excursion Low-Frequency (LF) driver and 2 x 200 Watt amps for your passive satellite speakers, the iP12B is ideally suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs and much more. Lightweight (only 22.3 kg / 49.2 lbs) and easy to transport, the iP12B also features a 3-channel digital mixer with industry-leading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifier and Spatial Sound technologies, plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control. This cool-running system delivers amazingly-deep, chest-pounding bass that will keep the party going all night long.
Tiny Subwoofer – Tremendous Sound Designed for maximum portability and low-end support, the iP12B can be used as a standalone subwoofer with your powered full range speakers, or the backbone of a great-sounding speaker system. Setup is fast and easy; just connect your mic or mixer feed, your passive loudspeakers, and power. The iP12B instantly fills the room with the world-famous TURBOSOUND "sound” that has won the coveted Queen’s Award an unprecedented three times.
KLARK TEKNIK – Inspired Technology KLARK TEKNIK is recognized worldwide as one of the most prestigious British audio companies, with a 40-year pedigree and even a TEC Lifetime Achievement Award to back it up. The Company has designed and manufactured products for world-class artists, and their legendary DN780 reverb processor is considered by leading audio engineers around the world as the industry standard. Check out their website to learn more about KLARK TEKNIK’s legendary heritage. TURBOSOUND is proud to incorporate custom-engineered KLARK TEKNIK Class-D amplifier and DSP technologies into their products.
DSP – the Secret to Superb Sound From the instant your signal enters the iP12B, the built-in DSP takes over ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the 24-bit processor analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality. It’s like having an audio engineer monitoring the input and output signals, dialing in the perfect EQ and constantly making subtle adjustments to the crossover, compressor/limiter, three discrete amplifier channels and more, all of which adds up to significantly better sound. Custom-Engineered Drivers Our speakers are designed specifically for each application – it’s what sets us apart from the competition. When you buy a TURBOSOUND speaker system, you can rest assured that the speakers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results.
Built-in Digital Mixer – Comprehensive Remote Control The iP12B features a fully addressable onboard digital mixer with two combo jack/XLR connectors that accept balanced and unbalanced connections for dynamic mics and line-level instruments. The simple and intuitive user interface consists of a single rotary push-encoder with Process, Setup, Exit and Enter function buttons. A beautifully-backlit LCD display controls DSP functions including mixer parameters, 3 band EQ and presets. All settings can be controlled locally, or via free downloadable iPhone/iPad apps – and locked down to prevent unauthorised access. You get total control of the iP12B directly from your iPhone or iPad. This amazing feature lets you adjust all settings from either the listening area or the stage, for the perfect sound every time. The dedicated apps are available free of charge at turbosound.com, or from the Apple App Store.
Bluetooth Ready The days of tape decks, CD and even mp3 players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. An industry first, the iP12B puts all your music at your fingertips via stereo Bluetooth. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped iOS device, such as your iPad, iPod touch, iPhone or even your laptop computer.
Stunning Performance – Superb Value The INSPIRE iP12B powered subwoofer stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Ultra-lightweight and powerful with a custom-designed 12" long-excursion LF driver, an integrated mixer, stereo Bluetooth streaming, iPhone/iPad remote control, 1,000 Watts of KLARK TEKNIK’s Class-D output power and Digital Sound Processing, the iP12B is ideal for both portable and installed applications.
FEATURES
Speaker configuration Active/passive: Active Type: Subwoofer LF driver: 12“ MF driver: N/A HF driver: N/A Power Amplifier class: D Wattage: 600W, 2 x 200W (satellites) Mixer/preamp: N/A Audio Frequency response: 45hZ - 150Hz +3dB Coverage pattern: N/A Max SPL: 120 dB peak Inputs XLR: 2 XLR/TRS combo TRS: N/A TS: N/A RCA: N/A Output/thru XLR: 2 TRS: N/A TS: N/A SpeakON: 2 Enclosure Cabinet material: 18 mm birch ply Width: 16.5“ Height: 19.1“ Depth: 19.7“ Weight: 49.2 lb.
|
The black Polk Audio Monitor XT12 12" 100W Subwoofer provides Polk's loud, low, effortless bass so you can enjoy movies, music, and gaming with more impact and excitement. Easily integrated into any home theater or music listening environment and featuring new woofer, amplifier, and cabinet designs, the XT12 fulfills the Polk promise of great sound for all.
Polk has always been known for speakers that produce deep, powerful, effortless bass, and the Monitor XT12 is no exception. A 12" Dynamically Balanced woofer in a ported cabinet, powered by a clean and ultra-efficient 100W Class A/B amplifier, delivers bass as low as 24 Hz, adding more punch and impact to your favorite music, movies, and video games.
When you want bass this loud and this low, your subwoofer needs more than a great woofer and powerful amplifier to make it seem effortless. The Monitor XT12 is housed in a critically braced MDF cabinet with a removable, precision-fit grille to isolate the sound of the woofer while minimizing unwanted resonances and sonic interference.
The Monitor X12 features a consistently variable crossover, polarity, and volume control to seamlessly blend the massive bass it provides with your system. In addition, the Monitor XT12 offers line level, LFE, and nickel-plated binding post inputs, ensuring compatibility with your receiver. Plus, the XT12 is perfect for the modern trend of integrating two subs into your home theater for even more bass while smoothing out the low frequencies throughout the room.
The Monitor XT series was designed with quality, timbre-consistent components throughout to enable you to mix and match models to build your dream home theater or music listening setup. Matched components provide a unified sound field with seamless speaker-to-speaker blending for truly immersive listening experiences.
|
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub packs 700 W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
- 15mm Plywood Enclosure, Internally Braced, with Textured Paint
- EVS-12S 305mm (12“) Woofer for Powerful, Engaging Bass Response
- Class D Lightweight Amplifier
- Pole Mount for Full-Range Systems
- Dual XLR Inputs and Outputs
- Switchable EQ Modes for Different Applications
- LED indicators for Power On and Limit
Amplifier Power | 800 Watts (RMS) | Color | Black | Coverage (Nominal -6 dB) | Omnidirectional | Input Connections | (2) XLR Stereo Input, (2) XLR Stereo Output | Power Requirement | 120V: 90V-132v, 1.0 A, 50-60Hz 230V: 190V-264V, 0.6A, 50-60Hz | Speaker Type | Powered Subwoofer | Frequency Response (-3 dB) | 53-93 Hz Half Space | Frequency Response (-10 dB) | 44-118 Hz Half Space | Max. SPL/1m (calc) | 126 dB Half Space | System Power Handling (Continuous/Program/Peak) | 700 Watts | LF Transducer | (1) EVS-12S, 305mm (12“) Woofer | Crossover Frequency | 100 Hz | Enclosure Material | 9-ply, 15mm Plywood, Internally Braced, with Textured Paint | Outdoor | No | Grill | 16GA Steel with Black Powdercoat | Height | 400 mm (15.75“) | Width | 444.5 mm (17.5“) | Depth | 457.2 mm (18“) | Weight Net | 20.9 kg (46.08 lbs) | Shipping Weight | 26.5 kg (58.42 lbs) |
| Housing a 12” woofer, the SUB 702-AS II, is a very compact active sub enclosure and features a 1400 W powerful digital amplifier. It is the ideal complement to 8” or 10” speakers, creating small but powerful satellite systems with outstanding performance. Thanks to its compact size it can easily be carried and is very quick and easy to start using the built-in digital stereo crossover (DSP) with adjustable crossover frequency to connect the satellite.
APPLICATIONS
- • Club sound, DJs
- • Portable PA
- • Rental
- • Small theatre
General Specs
1400 Watt Digital Amplifier
12" Woofer, bass reflex housing
Stereo crossover
Switchable crossover frequencies
Phase-reverse switch
Electronic equalization, soft limiter and protection
Stereo XLR input, Stereo XLR signal output
Acoustical Specs
Frequency Response -3 dB: 40 Hz ÷ 120 Hz
Max SPL: 129 dB
Woofer:12“, 2.5" v.c.
Inputs/Outputs
Stereo XLR
Output connectors:Stereo XLR
Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:80-110 Hz Hz
Protections:thermal, rms
Limiter:soft limiter
Controls:Volume, EQ, phase, xover
Amplifier Specifications
Total power:1400 W PEAK
Low frequencies:1400 W PEAK
Total power:700 W RMS
Low frequencies:700 W RMS
Cooling:convection
Connections:VDE connector
Cabinet Specs
Cabinet Material:Baltic birch plywood
Hardware:Pole mount
Handles:2 side
Pole Mount/Cap:yes
Grille:Steel
Colour:Black
Size/Weight
Height:487/19.17 mm/inch
Width:354/13.94 mm/inch
Depth:498/19.61 mm/inch
Net Weight:17.5/38.58 kg/lbs |
From rock band to club DJ, StageSource™ L3s is a high-powered subwoofer designed to deliver best-in-class low-end performance - whatever the application.
Designed for the widest range of scenarios, Line 6 Smart Speaker modes allow you to configure the subwoofer output to deliver the perfect low-end performance at the touch of a button. Whether you need a huge punchy kick and bass for a live rhythm section, or deep sub-bass lows for use in a DJ rig, Smart Speaker modes make setup simple and deliver stunning sound in every application.
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
Cabin Type: | Wooden subwoofer | Amplifier: | 1,200‐watt | LF/MF, Woofer: | 2x12” | DSP Processor: | Yes | Frequency Response: | 38 Hz to 910 Hz | Dimensions: | 419 mmx867 mmx591 mm | Weight: | 37.5 kg | Color: | Black |
|
Reviews
There are no reviews yet.