| Content | What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. The amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means our Class-D amps don't need massive heat sinks, and that means we can make them lighter. Plus B1200D's amplifier provides all the dynamic punch and fidelity you'd expect from a much larger, more expensive subwoofer.
Custom-Designed Transducers
The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we never cut corners, and we never just grab whatever happens to be on the shelf. We custom-design our own so they are the perfect match for both the amplifier and the application. We wind our own voice coils, process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components. The 12" long-excursion, low-frequency transducer was designed specifically for use in the EUROLIVE B1200D.
Take Control
The B1200D features balanced XLR inputs and outputs, as well as balanced XLR Thru jacks for connecting additional enclosures. A Boost Frequency knob lets you boost any frequency between 45 Hz and 90 Hz. Then just flick the Boost switch to give your selected frequency a +10 dB boost. We've also provided a High Cut dial that controls the upper-corner frequency for the internal amplifier without affecting Thru A/B signals. A Level knob controls the input gain, and the Phase switch reverses the output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance including power, signal present and input overloads.
Product Features:
- High-performance 500-Watt powered subwoofer for PA applications
- Powerful 12'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
- Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact
- State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
- Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
- Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
- Variable High Cut control for perfect sound alignment
- Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
- Power, Signal and Clip LEDs for perfect monitoring
- Intelligent limiter for maximum sound performance and woofer protection
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Pole socket for mounting with commercial spacer poles
- Ergonomically shaped handles for easy transport
- Rugged steel grill for optimal speaker protection
- High-quality components and exceptionally rugged construction ensure long life
|
- 2 CHANNELS INPUT & OUTPUT
- Woofer 12”
- RMS Power 350W CLASS AB Amplifier
- Peak power 700W
- Frequency range 40Hz-120Hz
- Peak spl 126 dB
- Power supply AC110V/AC230V
MODEL IS S112A
System type Vented enclosure subwoofer
LF CONE 12“
LF VOICE COIL 2“VC
LINE INPUT 2 x XLR-F IN
LINE OUTPUT 2 x XLR-M OUT
CROSSOVER OUTPUT FLAT or 100 Hz High-Pass
RMS POWER 350 W
PEAK POWER 700 W
FREQUENCY RESPONSE 40hz-120khz
PEAK SPL 126 dB
DIMENSIONS 42x51x40 cm (WxHxD)
WEIGHT 21 Kg
| Housing a 12” woofer, the SUB 702-AS II, is a very compact active sub enclosure and features a 1400 W powerful digital amplifier. It is the ideal complement to 8” or 10” speakers, creating small but powerful satellite systems with outstanding performance. Thanks to its compact size it can easily be carried and is very quick and easy to start using the built-in digital stereo crossover (DSP) with adjustable crossover frequency to connect the satellite.
APPLICATIONS
- • Club sound, DJs
- • Portable PA
- • Rental
- • Small theatre
General Specs
1400 Watt Digital Amplifier
12" Woofer, bass reflex housing
Stereo crossover
Switchable crossover frequencies
Phase-reverse switch
Electronic equalization, soft limiter and protection
Stereo XLR input, Stereo XLR signal output
Acoustical Specs
Frequency Response -3 dB: 40 Hz ÷ 120 Hz
Max SPL: 129 dB
Woofer:12“, 2.5" v.c.
Inputs/Outputs
Stereo XLR
Output connectors:Stereo XLR
Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:80-110 Hz Hz
Protections:thermal, rms
Limiter:soft limiter
Controls:Volume, EQ, phase, xover
Amplifier Specifications
Total power:1400 W PEAK
Low frequencies:1400 W PEAK
Total power:700 W RMS
Low frequencies:700 W RMS
Cooling:convection
Connections:VDE connector
Cabinet Specs
Cabinet Material:Baltic birch plywood
Hardware:Pole mount
Handles:2 side
Pole Mount/Cap:yes
Grille:Steel
Colour:Black
Size/Weight
Height:487/19.17 mm/inch
Width:354/13.94 mm/inch
Depth:498/19.61 mm/inch
Net Weight:17.5/38.58 kg/lbs |
Need a powerful bass enhanced system that wonʼt completely fill your van?
The ART 902-AS active subwoofer is what youʼre looking for.
Thanks to the newly designed 12” high power neodymium woofer it delivers granite like bass punch for any kind of application in a compact and easy to transport enclosure.
The cabinet is made in Baltic Birch and heavy duty painted to withstand the life on the road.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 45 Hz | ÷ 120 kHz | | Max SPL: | 130 dB | | | Woofer: | 12“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | Bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 - 120 Hz | | | Protections: | Thermal, rms | | | Limiter: | Limiter | | | Controls: | Volume, phase, xover | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | VDE connector in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 515 / 20.27 mm/inch | | | Width: | 410 / 16.14 mm/inch | | | Depth: | 550 / 21.65 mm/inch | | | Net Weight: | 29.6 / 65.25 Kg/Lbs |
|
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub packs 700 W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
- 15mm Plywood Enclosure, Internally Braced, with Textured Paint
- EVS-12S 305mm (12“) Woofer for Powerful, Engaging Bass Response
- Class D Lightweight Amplifier
- Pole Mount for Full-Range Systems
- Dual XLR Inputs and Outputs
- Switchable EQ Modes for Different Applications
- LED indicators for Power On and Limit
| Amplifier Power | 800 Watts (RMS) | | Color | Black | | Coverage (Nominal -6 dB) | Omnidirectional | | Input Connections | (2) XLR Stereo Input, (2) XLR Stereo Output | | Power Requirement | 120V: 90V-132v, 1.0 A, 50-60Hz 230V: 190V-264V, 0.6A, 50-60Hz | | Speaker Type | Powered Subwoofer | | Frequency Response (-3 dB) | 53-93 Hz Half Space | | Frequency Response (-10 dB) | 44-118 Hz Half Space | | Max. SPL/1m (calc) | 126 dB Half Space | | System Power Handling (Continuous/Program/Peak) | 700 Watts | | LF Transducer | (1) EVS-12S, 305mm (12“) Woofer | | Crossover Frequency | 100 Hz | | Enclosure Material | 9-ply, 15mm Plywood, Internally Braced, with Textured Paint | | Outdoor | No | | Grill | 16GA Steel with Black Powdercoat | | Height | 400 mm (15.75“) | | Width | 444.5 mm (17.5“) | | Depth | 457.2 mm (18“) | | Weight Net | 20.9 kg (46.08 lbs) | | Shipping Weight | 26.5 kg (58.42 lbs) |
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via three presets, sub/top system-match, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 129 dB peak SPL utilizing ultraefficient, high-sensitivity transducer designed and engineered by EV.
- Ideal for portable and installed applications. Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
ELX200-12SP features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 129 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12L woofer). Powered subwoofer models allow easy setup via three presets (Music, Live, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall
settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and compact 15-mm wood enclosures, integrated M20 threaded pole polemount plate, and two-handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
| Available Color | Black | | Connector Type | (2) XLR/TRS combo jacks and (2) XLR link outputs | | Depth | 457mm (18“) | | Specifications |
| Enclosure Material | 15 mm plywood with EVCoat | | Family | ELX200 | | Frequency Range (-10 dB) | 41 Hz – 165 Hz | | Frequency Response (-3 dB) | 49 Hz – 135Hz | | Grille | 18 AWG steel with powdercoat | | Height | 397mm (15.6“) | | LF Transducer | EVS-12L 300 mm (12 in) | | Low Pass Frequency | Adjustable: 80 Hz, 100 Hz, 120Hz, 150 Hz | | Max. SPL/1m (calc) | 129dB | | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.8A | | Power Rating | 1200W | | Powered or Passive | Powered | | Shipping Weight | 22.3kg (49.2 lbs) | | Speaker Type | Subwoofer | | Weight Net | 19.1kg (42.1 lbs) | | Width | 445mm (17.5“) | | Woofer Size | 12inch |
|
Reviews
There are no reviews yet.