BEHRINGER B2520 PRO Passive speaker 550W 4ohm (Black)

• High-performance 2,200-Watt PA loudspeaker system
• Extremely powerful dual 15'' long-excursion drivers provide incredibly deep bass and acoustic power
• Proprietary 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide 50 Hz – 18 kHz frequency range (-10 dB); impedance 4 Ohms
• Extremely high sound pressure level (99 dB full space 1 W @ 1 m)
• Overload-protection circuitry ensures optimal HF driver protection
• Parallel input connectors allow linking of additional loudspeakers
• Ergonomically shaped handles for easy transport
• Rugged steel grill for optimal speaker protection
• Professional speaker connectors (compatible with Neutrik Speakon)
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

The QRx153/75 is a biamped three-way full-range loudspeaker system capable of filling performance spaces with beautifully balanced audio and high acoustic output capability.

The QRx153 is designed to be bi-amplified at 500 Hz utilizing a DX38 digital controller, or a P1202 power amplifier with M153 control module. All QRx models use 13 ply plywood, Futura coating, and steel grilles for wear and weather resistance. The QRx153 is trapezoidal with 15° side angles. "L” track rigging is installed on the enclosure top and bottom. Small arrays can be flown for live work, or the system can be suspended horizontally or vertically for fixed installations.

Thanks to its combination of the DL15ST woofer and large enclosure volume; the horn-loaded 8-inch midrange driver and powerful 3-inch compression driver, the EV QRx153/75 has extended response for high-level, high fidelity applications without the need of a subwoofer. The horn-loaded midrange driver provides excellent pattern control in this critical response area. Both MF and HF horns are aimed downward 10° to provide optimal aiming when the speaker is elevated above the audience. This also helps control sound to provide greater intelligibility.

The QRx153/75 has an excellent combination of performance and flexibility for demanding audiences.

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημειων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.
     

Frequency Range       :       38 Hz - 19 kHz (-10 dB)

Frequency Response       :       45 Hz - 17 kHz ( ± 3 dB)

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       10

Directivity Index (DI)       :       10 dB

Crossover Modes       :       Tri-amp / Bi-amp switchable

Passive Crossover Slopes       :       MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz

Transducer Power Rating (AES)       :       LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs

Long-Term System Power Rating (IEC)       :       LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs

Maximum SPL       :       LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)

System Sensitivity of Passive Sections 6       :       MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
 

Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.

Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.

Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.

The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.

Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.

Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.

Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.

C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required

Features:

• Tough, paintable exterior coating
• Dual cast-frame 15" drivers
• Frequency response: (-10dB) 42Hz - 16kHz
• 1,000W program handling, 2,000W peak
• Sensitivity: 99dB
• 20“W x 46“H x 24“D
• 101 lbs.

• High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
• Available in black or white finish
• Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn
• Overload-protection circuitry ensures optimal HF driver protection
• Versatile trapezoidal enclosure design allows different positioning:
• -Stand mounting with 35-mm pole socket
• -Tilts on its side for use as a floor monitor
• Optional swiveling mounting brackets
• Ergonomically shaped handles for easy carrying and setup
• 2 professional speaker connectors plus 1⁄4'' jack connectors
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in our wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.

Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.

Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?

The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.

But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.

You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!