| Content | EUROLIVE B2520 PRO High-Performance 2,200-Watt PA Loudspeaker System with Dual 15" Woofers
- High-performance 2,200-Watt PA loudspeaker system
- Extremely powerful dual 15'' long-excursion drivers provide incredibly deep bass and acoustic power
- Proprietary 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide 50 Hz – 18 kHz frequency range (-10 dB); impedance 4 Ohms
- Extremely high sound pressure level (99 dB full space 1 W @ 1 m)
- Overload-protection circuitry ensures optimal HF driver protection
- Parallel input connectors allow linking of additional loudspeakers
- Ergonomically shaped handles for easy transport
- Rugged steel grill for optimal speaker protection
- Professional speaker connectors (compatible with Neutrik Speakon)
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Youʼve worked hard to get to this point in your musical career. Now youʼre ready to take your message to the masses. Your performance, and your audience, deserves a loudspeaker system that delivers the power and clarity of your vision—it deserves EUROLIVE Professional.
Power Handling Capacity The B2520 PRO loudspeaker is engineered to handle the demands of professional gigs, from small clubs to large stages. Capable of handling up to 2,200 Watts, the B2520 PROʼs design makes it a great-sounding PA loudspeaker for front-of-house, as well as side fill monitor applications.
Luxurious Lows In order to produce tight, deep bass, a loudspeaker has to move lots of air. EUROLIVE Professional Series loudspeakers accomplish this by using powerful, long-excursion LF (Low Frequency) drivers that are handmade in our own factory. While some companies are content to use "off-the-shelf” drivers, we custom-design each LF driver to perfectly match its enclosure and application. The B2520 PRO features dual 15" long-excursion LF drivers in a tuned enclosure, providing rich, tight bass all the way down to 50 Hz. Thatʼs bass that you can feel, as well as hear.
Spacious Highs High-frequency (HF) content can easily make or break your performance. Too much and the sound becomes brittle and obnoxious, too little and it sounds muddy and poorly defined. The EUROLIVE PRO Seriesʼ 1.75" titanium-diaphragm compression driver provides natural-sounding high end, with an ultra-wide 100° x 50° sound dispersion pattern.
Letʼs Get Technical B2520 PROʼs unique enclosure profile allows multiple positioning options: 10° or 35° cluster and stacking mode, or positioning as a side fill monitor. The B2520 PRO is capable of extremely high sound pressure levels (99 dB full space 1 W @ 1 m) and provides a 50 Hz to 18 kHz frequency range. Built-in overload-protection circuitry ensures optimal HF driver protection.
Value We could talk on and on about the EUROLIVE Professional Series loudspeakers, but hearing is believing. Stop by your BEHRINGER dealerʼs showroom today and put the B2520 PRO to the test. We think youʼll be hard pressed to find a better sounding loudspeaker for anywhere near this price! |
Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.
Product Specifications - Enclosure: Sealed type
- Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
- Rated Impedance: 8 Ω
- Sensitivity: 98 dB (1 W, 1 m)
- Frequency Response: 70 - 20,000 Hz
- Crossover Frequency: 3 kHz
- Directivity Angle: Horizontal: 90゜, Vertical: 40゜
- Speaker Component: Low frequency: 38 cm (15) cone-type
- Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
- Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
- Finish: Enclosure: Polypropylene, black
- Punched net: Surface-treated steel plate, black
- Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
- Weight: 12 kg (26.46 lb)
|
Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
| The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.
The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.
The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed. |
|
Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15" low frequency driver with 2" titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 PASSIVE | | GENERAL INFO |
| | System type | 15" 2-way passive | | Frequency response +/- 3db | 50-18kHz | | Sensitivity (db 1w@1m) | 97dB | | System impedance | 8 ohms | | Maximum SPL Peak dB | 129dB | | POWER HANDLING (Watts) |
| | Continuous RMS | 400 | | Program | 800 | | Peak | 1600 | | LF DRIVER |
| | Lf driver size mm / inches | 1x15“ | | Lf voice coil size | 75mm/3“ | | HF SECTION |
| | Hf voice coil size | 51mm/2" | | Hf type | Compression Driver | | Hf diaphragm material | Titanium | | Horn dispersion (H x V) | 90 x 60 | | Hf exit size mm / inches | 25mm/1“ | | Hf horn shape | EWG™ - Elliptical Waveguide | | Hf peak indicator | Peak LED ring in horn throat | | CROSSOVER SECTION | 2-way | | Crossover Frequency / Filter | 1.8kHz / 12dB per oct. | | Hf driver protection | DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) | | PHYSICAL FEATURES |
| | Finish | Black or White | | Handle quantity | 2 carry handles (one on each side) | | Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint | | Stand adapter - BOTTOM | Pole-mount receptacle with lock screw, Optional wall-mount bracket | | Enclosure type | Molded Polypropylene | | Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications | | IN / OUT PANEL (speaker Level) |
| | Input connector | 2 x 1/4" jacks and2 x Speakon™ | | DIMENSIONS & WEIGHT |
| | Height ( mm / ins ) | 708mm/27.9“ | | Width Front / Rear / mm / ins | 477.8mm/18.8“ | | Depth ( mm / ins ) | 401.77mm/15.8“ | | Net weight ( kg / lbs ) | 22kg/48.4 lbs | | Gross weight ( kg / lbs ) | 25kg/55 lbs | |
|
Reviews
There are no reviews yet.