Product Features: Distribution Hub for P16-I for system expansion 1 ULTRANET input feeds 8 ULTRANET outputs (RJ-45) Provides bus-power and 16-channel signal transmission for all 8 outputs Up to six P16-D ULTRANET Distributors can be combined for a total of forty-eight P16-M Personal Mixers Status LED indicators for RJ-45 input and 8 RJ-45 outputs Internal […]
Distribution Hub for P16-I for system expansion
1 ULTRANET input feeds 8 ULTRANET outputs (RJ-45)
Provides bus-power and 16-channel signal transmission for all 8 outputs
Up to six P16-D ULTRANET Distributors can be combined for a total of forty-eight P16-M Personal Mixers
Status LED indicators for RJ-45 input and 8 RJ-45 outputs
Internal autorange power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Extremely rugged construction ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany
Product Features:
Distribution Hub for P16-I for system expansion
1 ULTRANET input feeds 8 ULTRANET outputs (RJ-45)
Provides bus-power and 16-channel signal transmission for all 8 outputs
Up to six P16-D ULTRANET Distributors can be combined for a total of forty-eight P16-M Personal Mixers
Status LED indicators for RJ-45 input and 8 RJ-45 outputs
Internal autorange power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Extremely rugged construction ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany
User's Manual
INPUTS: 4 balanced stereo audio +4dBu/50kΩ on XLR (F) connectors.
OUTPUTS: 20 balanced stereo audio +4dBu/50Ω on XLR (M) connectors.
MAX. OUTPUT LEVEL: 23.8Vpp.
BANDWIDTH (-3dB): >100kHz.
S/N RATIO: 89.3dB.
CROSSTALK: -78dB.
CONTROLS: Level (x4): -0.7dB to +5.1dB, mode selector switches.
COUPLING: AC (input); DC (output).
AUDIO THD + NOISE: 0.081%.
AUDIO 2nd HARMONIC: 0.006%.
POWER SOURCE: 230V AC, (115V AC USA), 15VA.
DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.7lbs) approx.
ACCESSORIES: Power cord, rack "ears“.
INPUT: 1 unbalanced stereo/balanced mono, 1Vpp/33kΩ on a 3.5mm mini jack.
OUTPUTS: 5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5-mm mini jacks.
MAX. OUTPUT: 5Vpp.
AUDIO BANDWIDTH (-3dB): 20kHz.
S/N RATIO: 80dB unweighted.
CONTROL: Left and right gain rear trimmers (0 to +3.5dB).
COUPLING: AC.
THD: 0.03% (2nd harmonic).
POWER SOURCE: 12V DC, 100mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
Features
Unique ?user-friendly? Zoner/Mixer
Choice of four program sources to two zones
Comprehensive microphone control options
Local or Remote Master zone control
Mic and Zone EQ controls
Switchable voice override
Multiple stereo inputs; Balanced XLR outputs
Intuitive layout for non-technical operators
Innovation
The ARX BarMIX is a unique ?user-friendly? Zoner/Mixer, enabling a
choice of four stereo audio sources to be routed to each of two zones.
Intuitive Layout
The linear ergonomic flow of the front panel controls, coupled with the
visual feedback of level settings and source selection makes using the
BarMIX totally intuitive, even for casual staff with no prior experience.
Up to four stereo sources can be connected to the BarMIX, such as:
Tape/cassette/DVD/CD decks, TV/Satellite/video audio, Juke Box/Karaoke
systems. Interlocking switches for each source ensure that there is no
risk of accidentally selecting two sources for the one zone.Each switch
has an associated status LED for easy at-a-glance confirmation of which
program source is active, and numbered panels above each switch let you
label each source.The BarMIX has provision for connecting a microphone,
to allow announcements to made in the zones. There is comprehensive 3
way EQ and an individual level control for the microphone on the front panel,
as well as a Gain trim control on the rear.Front panel switches turn the
microphone on for each zone, and there is also provision to connect a push-
to-talk signal for priority/evac override.
Control Options
Each of the two output zones has the option of being controlled Locally, ie
from the control on the unit itself, or Remotely, with the optional BM-1 VCA
Remote Level Control pack (See Right) Fitting this option will disable the front
panel control. A front panel LED indicates if this option is fitted and active.
This is useful if the unit needs to be mounted some distance away from where
it is likely to be controlled.For example, the BarMIX unit may be installed alongside
other audio equipment in an equipment room, while the Remote can be located
somewhere convenient - behind the bar, for example.From a security point of view,
or where volume can be a neighbour problem, this option provides ultimate over-riding
level control well out of the way of prying fingers!From a security point of view, or
where volume can be a neighbour problem, this option provides ultimate over-riding
level control well out of the way of prying fingers!
Zone Setup
On the rear, each input source has a Left and Right phono (RCA type) input and an
associated Gain trim control. This allows level matching of all four sources, so there
is no need to reset the Zone output levels when switching between sources.
Each Zone has Left and Right Balanced XLR outputs, plus dual LED meters show output
levels for each zone.
Universal AC Power
AC power is a universal 100 to 120V or 220 to 240V, and is connected to the unit via a
removable power lead and standard 3 pin IEC connector, with built in fuse and voltage
selection switch.
The intuitive layout and precise control offered by the ARX BarMIX make it the ideal choice
for any Zone mixing installation application.
T E C H N I C A L S P E C I F I C A T I O N S
Input Impedance
Microphone 4 KOhms balanced, Line 100 KOhms unbalanced
Input Gain
Microphone Variable 20 dB to 60 dB with rear trim control,
Line ?10 to +10 dB
Output Level (Max) + 21dB
Signal to Noise ratio -90 dB ?A? weighted, all inputs @ unity,
Master @ unity
Distortion @ Unity Gain Below .005% 100Hz to 10 KHZ
Dynamic Range 115 dB
Mic Channel EQ
Low 100Hz 15dBCut/Boost
Mid 800Hz 15dB Cut/Boost, Broad Q
High 10KHz 15dBCut/Boost
Zone EQ
Low 100Hz 10dBCut/Boost
High 10KHz 10dBCut/Boost
Level Control Infinity to +6dB Gain (0 to 11)
Push to Talk Connector
TRS jack socket, wired Tip and Ring shorted to Duck
Hi Z Input Connectors Phono (RCA type)
Balanced Output Connectors Male XLR: Pin 1 Ground, Pin 2 +, Pin 3 ?
Frequency Response 20Hz?20KHz ±1dB
Power Requirements 100-120/220-240 V AC, 50/60 Hz 8VA (8 watts)
on 3 pin IEC connector
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm
BM-1 Remote Level Control DC controlled VCA kit disables front panel
Level control. Wall plate connects to BarMIX via balanced cable with TRS
jack connector. Use 1 per Zone
Input Unbalanced Stereo Audio, 1 Vpp @ 20K ohms, on a 3.5mm stereo miniplug
Output Unbalanced Stereo Audio x2, 1 Vpp @ 150 ohms, on 3.5mm stereo miniplugs
Coupling AC
Audio Bandwidth 100 kHz
Signal to Noise Ratio 71.6 dB
Audio THD 0.017%
Audio Control Left and Right Gain Control
Dimensions 2.36 x 2.56 x 1“
6 x 6.5 x 2.5cm
WxDxH
Weight 0.22 lbs
0.1 kg
Power Source 12 VDC on a AC Power Adapter
INPUT: 1 genlock video, looping, 1Vpp/75Ω, on BNC connectors with a termination switch.
OUTPUTS: 6 black burst signals, 0.3Vpp/75Ω, (sync) 1 color bar output 1Vpp/75Ω. 2 x 1kHz, +4dBu/47Ω outputs on XLR connectors, 2 x 1kHz, 1Vpp/100Ω outputs on RCA connectors.
COLOR BAR: 13 selectable patterns.
PHASE ERROR: 1Deg.
S/N RATIO: 73dB.
CONTROL: H control: +/-1/2 line, 37nS steps; V control: 15.5 lines, 0.5 line steps. SCH control: 360Deg, by front touch switches. RS-232 control.
SYNC OSCILLATOR: Crystal controlled.
SC OSCILLATOR: Crystal controlled.
SYNC/SC: Fully genlocked.
STABILITY: 5ppm.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 10VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.5kg (5.5lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: Kramer distribution amplifiers for additional burst or bar outputs.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.