BEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester

55.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB Super-easy operation with intuitive LED display Continuity check and intermittent contact detection Phantom-power and ground-shield check Test-tone generator: 1 kHz or 440 Hz at +4 dBu, […]

 

Read more

  • Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
  • Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
  • Super-easy operation with intuitive LED display
  • Continuity check and intermittent contact detection
  • Phantom-power and ground-shield check
  • Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
  • Operates with 2 AA size batteries (not included)
  • Designed and engineered in Germany
Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester removeDBX ADVANCED CABLE TESTER CT-3 removeDIGITAL SOUND 8928 Sound dB meter removeNT-INSTRUMENTS MINI SPL MEASUREMENT MICROPHONE removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter removeALPHATON ACT-100 CABLE TESTER remove
NameBEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester removeDBX ADVANCED CABLE TESTER CT-3 removeDIGITAL SOUND 8928 Sound dB meter removeNT-INSTRUMENTS MINI SPL MEASUREMENT MICROPHONE removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter removeALPHATON ACT-100 CABLE TESTER remove
Image
SKUE010300DBX CT-38928MINI SPLE010254ACT-100
Rating
Price 55.00 incl. GR VAT 211.15 incl. GR VAT93.00 incl. GR VAT 513.36 incl. GR VAT 85.00 incl. GR VAT 297.60 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Only 5 left in stock

Only 2 left in stock (can be backordered)

In stock

AvailabilityIn stockAvailable on backorderIn stockOnly 5 left in stockOnly 2 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
  • Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
  • Super-easy operation with intuitive LED display
  • Continuity check and intermittent contact detection
  • Phantom-power and ground-shield check
  • Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
  • Operates with 2 AA size batteries (not included)
  • Designed and engineered in Germany

 

The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.

Features
  • Tests up to 8-pin cables
  • 2 piece chassis for testing installed cables
  • Test Tone Generator
  • Allows connection between different format connectors with ease
  • ʽBananaʼ connector continuity tester with beeper and LED indicator
  • Super-rugged construction for durability and longer life
  • (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
  • (2) BNC connectors for testing of 2 pin->to pin connections
  • (2) RCA Phono connectors for testing of 2 pin->to pin connections
  • (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
  • (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
  • (2) Speaker Twist connectors for testing of 4 pin->to pin connections
  • (2) Banana connectors for testing of 1 pin->to pin connections
  • (2) 1/4” (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections
  • (2) RJ45 connectors for testing of 8P8C modular connections
  • (2) 1/8” (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections
  Specifications
Power Requirements (2) 9V batteries, one per side (Batteries not included)
Dimensions 3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)
 

 

 

 

Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery

The MiniSPL is the perfect accessory to the Acoustilyzer & Minilyzer for
acoustical measurements.
  The MiniSPL is a battery powered measurement microphone. Together
with the Acoustilyzer or Minilyzer, it forms an acoustical analyzer and integrating
sound level meter. Additionally it may be operated as a stand-alone microphone
e.g. connected to a balanced audio-line, a microphone-input or a sound-card.
  
Product-details
? Battery powered
? Factory-set sensitivity
? No phantom power required
? 1/2" microphone, class 2 acc. IEC 61672
? Omni-directional
? Supplied with mic clamp, wind protection
? Typical frequency response included
MiniSPL together with Acoustilyzer:
? SPL Meter / RTA
? Reverberation Time RT60
? Delay Time
? FFT Analyzer
? Speech Intelligibility STI-PA
MiniSPL together with Minilyzer:
? Measurements: SPL, min./max., Leq
? 1/3rd octave spectrum analyzer

Details The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer. Specifications • Designed to set in an amp rack to view your decibel level • Creates a great light show in your amp rack • Display progresses from green through amber to red • Sensitivity adjustment on both left and right channels • 2 separate modes: dot and bar • Includes 5V power supply • Line Inputs: Left & Right RCA / Left & Right XLR • Line Outputs: Left & Right RCA / Left & Right XLR • Voltage Operation: DC 5V, 500mA Power Supply included • Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm • Weight: 2.5 lbs. / 1.25kg.

Cable Tester ACT-100

The Alphaton active remote cable tester can be used for testing either normal short
cables or long ones, especially mufticores, wkh connectors not being accessible at
one time. The tester is especially suded for fixed installations where cables can not
be tested with a standard type cable tester or Ohm meter. Either symmetric and
unsymmetric cables can be tested.
“Cold" solderings and junction resistances are displayed by color or luminosity changes
in three color LED Display. The imprinted fault table incorporates alt important fault
conditions, indeed not all possible ones due to their reiatively large number. In case the
display is in a state which cannot be found on the imprinted table, it can be looked up in
the user's manual. In any case, however, the cabie is in aquite unusable state and should
be repaired or replaced.The Alphaton cable tester has a SEND and a REMOTE section.
The REMOTE sectionconsistsof two recessed mounted XLR type male or female connector
and a stereo phone jack at the right hand side of the tester. Additionally, a separate REMOTE
plug is delivered togetherwith the active remote cable tester for testing long cables in fixed
installations.

 

Weight2.00 kg1.00 kg0.50 kg0.10 kg1.50 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 0.10 kg
Weight 1.50 kg
Weight 0.80 kg