Content |
High-Performance 32-Channel Audinate Dante Expansion Card for X32
- 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same network
- Full remote control of X32 possible using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
| 4-Channel Analog Input Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features
- 24bit resolution, 4-in analog audio interface
- 4x XLR3-31 connectors (balanced)
- Max input level before clip: +24dBu (default) / +18dBu / +4dBV
Specifications
General Specifications |
Channel Count |
4IN |
Format |
Analog |
Max input level |
+24dBu(default) / +18dBu / +4dBV
*GAIN switches at each input port |
Sampling frequency |
44.1/48 kHz |
Resolution |
24 bit |
Connector |
4x XLR-3-31 type connectors (balanced) |
|
Yamaha PSL120 Cable for connecting 2 x PW800W
The Yamaha PSL120 will provide you with a fail-safe solution to connecting your PW800W power supplies. Once your power supplies are connected you can access multiple PM5D/PM5D-RH consoles.
|
The PM5D is reliably powered by an external power supply unit. The PW800W is extremely compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans are extremely quiet.
Two PW800W units can be serially connected using optional PSL120 cable for failsafe operation. PW800W accepts 100 - 240 volts so it can be used anywhere.
|
4-Channel Acoustic Echo Canceller Card for Yamaha DME64N/24N
The MY4-AEC card provides 4 channels of acoustic echo cancellation for remote conferencing using Yamaha's DME24N and DME64N digital mixing engines. As well as the echo cancellation function, the MY4-AEC card also offers a noise reduction function which removes steady-state background noise such as air conditioning and projector fans etc.
The card also has a feedback suppressor with 42 notch filters per channel to aid the suppression of feedback in PA systems. Any of the 8 internal mic/line inputs of the DME24N can be routed to the MY4-AEC. In the case of the DME64N, any of the MY card slots or CASCADE bus can route to the MY4-AEC. The AES/EBU inputs and outputs (with sample rate conversion) can route to either the MY4-AEC or be used independently in a DME design.
Features - 24bit resolution, 4-in/4-out adaptive echo canceller
- 4x Euroblock connectors
- HD sound quality
- 4ch feedback suppressor and noise reduction
- Additional 4ch AES/EBU I/O with sampling rate converter
- Easy operation with DME Designer
Specifications General Specifications | Compatible Hosts | DME24N, DME64N V4.0 or later software is required | Sampling Frequency | 44.1kHz, 48kHz, 88.2kHz, 96kHz (-10%, +6%) | Digital Input/Output Characteristics | Terminal | Format | Audio Data Length | Level | Connector | AES/EBU In 1/2, 3/4 | AES/EBU | 24bit | RS422 | Euroblock | AES/EBU Out 1/2, 3/4 | AES/EBU* | 24bit | RS422 | Euroblock | *Professional use Audio | Signal Processing | Adaptive Echo Canceller, Feedback Suppressor | Noise Reduction, Matrix Mixer | Frequency Range | 20Hz to 20kHz | Arrival Time of Direct Sound | 120ms maximum | Echo Time Delay | 400ms maximum | Echo Cancelling Capacity | 60dB maximum | Noise Reduction | 17dB maximum |
| AFTERMARKET CAP4Y KNOB CAP FOR FADER 4ΜΜ YELLOW
Size:
Long 23.5mm
Wide 11.5mm
High 11mm
HOLE 4mm |
Reviews
There are no reviews yet.