| Content |
- 2 analog inputs and 6 analog outputs for maximum flexibility
- High-end 96 kHz converters for ultimate signal integrity and wide dynamic range (120 dB)
- Precise Dynamic EQs for level-dependent equalization and extremely musical Parametric EQs, selectable for all inputs and outputs
- Several types of EQs (LP/BP/HP) for each input and output
- “Zero“-attack Limiters on all output channels for optimal speaker protection
- Four different mono and stereo output operating modes
- Individual crossover filter types (Butterworth, Bessel and Linkwitz-Riley) with selectable roll-off characteristics from 6 to 48 dB/octave
- Adjustable Delays for all inputs and outputs—allow manual or automatic correction for room temperature, phase and arrival time differences
- 60 user-defined internal presets storable
- Servo-balanced, gold-plated XLR connectors for all inputs and outputs
- Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbxʼs proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. |
Crossover Xover 352921-003 / 364246-001 for the JBL JRX-112M, JRX112M, and JRX 112M cabinet JBL JRX-112M Specifications: - 2-Way
- 1.8kHz Crossover Frequency
- 250W RMS / 1000W Peak
- 8 ohm Nominal Impedance
- (1) 1/4" Jack
- (1) Neutrik Speakon Jack NL4MP
(both jacks can be used for input & output) - Plate Size: 5.5" Wide x 3 7/8" High
- Cabinet Hole Cutout: 4 5/8" x 3 1/8
 Linkwitz-Riley filters <br>Separate Summed Mono Output <br>Balanced Inputs and Outputs <br>Built in High Pass filters <br>Intuitive, 'user friendly' layout <br>Flawless performance in any audio environment </p>
<p>Tamper-Proof Crossover Points<br>The crossover points are determined internally by the value of 4 resistors per channel; changing <br>the resistor value changes the crossover point. This 'semi fixed' method avoids the pitfalls of <br>externally adjusted crossover points, making the crossover points tamper-proof once they are set. <br>Idle fingers can't fiddle with the crossover points and create havoc with the system!<br>As a handy guide, a list of common crossover points and their corresponding resistor values are <br>printed inside the unit's lid, and also set out in the Owner's Manual.<br>On the front panel are level controls for Low and High in dual channel 2 way mode, and Low, Mid <br>and High in single channel 3 way mode, with corresponding Outputs on the rear panel. </p>
<p>Balanced Inputs and Outputs<br>EC-2 has Balanced Inputs and Outputs, on XLR connectors.<br>The EC-2 also has an additional summed Mono Low output, for applications that need a Mono Low <br>feed (e.g. Left and Right full-range plus a single Sub Bass speaker).<br>High Pass Filter<br>There is also a preset 30 Hz HighPass filter to remove unwanted subsonics which can damage speakers <br>and waste amplifier power.<br>In addition, each output has up to +6 dB of gain available, to compensate for amplifiers and speakers of <br>differing sensitivities.<br>Universal AC Power<br>AC power range is a universal 100 to 120V or 220 to 240VAC, and is connected to the unit via a standard <br>IEC connector, with built-in fuse and voltage change switch.<br>Uncompromising Audio Quality<br>Innovative circuit design is pointless unless it delivers stunning sound quality, and here the EC-2 excels. <br>It has been designed for uncompromising audio quality, and to achieve this, Linkwitz Riley 24dB (Fourth <br>Order) state variable filters are used throughout, ensuring a smooth Phase Correct transition through the <br>crossover region.<br>From Stage Monitors to Studio Monitors, from Front of House to the Front room of your House, the ARX <br>EC-2 is a crossover that is suited to any application that requires flawless, transparent sound.<br>You'll never compromise on Quality when you choose ARX </p>
<p>T E C H N I C A L S P E C I F I C A T I O N S </p>
<p>Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms<br>Input Headroom + 21 dB<br>CMRR >45 dB, 20 Hz-20 KHz<br>Output Impedance Balanced 300 ohms, Unbalanced 150 ohms<br>Output Level (Max) + 21dB<br>Frequency Response 30Hz-20KHz +or- 0.5dB<br>Note: 30 Hz is a function of the High Pass filter<br>Signal to Noise ratio (Controls at Unity) -90 dB Unweighted, -93 dB 'A' weighted<br>Distortion 004% THD,0dB,1KHz<br>Dynamic Range 111 dB<br>Power Requirements 100/120 V AC, 220/240 V AC<br>Weight 5 lbs/2.2 Kg<br>Dimensions 19“W x 13/4“H x 6“D, 482 x 44 x 155mm<br>Input Connector type XLR<br>Output Connector type XLR<br>Crossover point frequencies are changed internally by varying the value of 4 resistors <br>per channel. </p>
<p>Front Panel Controls<br>Low and High Output controls for 2 way mode <br>Low, Mid and High Output controls for 3 way mode <br>Marker panels for labelling crossover assigns <br>2 way/ 3 way status LEDs <br>Rear Panel <br>Balanced XLR Inputs and Outputs <br>Additional summed mono Low output <br>2 way / 3 way mode switch </p></td><td>Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "crossover_jrx112")
XLR balanced ins and outs
Mode switch for stereo 2-way or mono 3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
Specifications
| Input Connectors |
XLR (pin 2 hot) |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
| Max Input |
>+22dBu balanced or unbalanced |
| CMRR |
>40dB, typically >55dB at 1kHz |
| Output Connectors |
XLR |
| Output Type |
Impedance-balanaced/unbalanced, RF filtered |
| Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
| Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
| Bandwidth |
20Hz to 20kHz, +/-0.5dB |
| Frequency Response |
90 kHz, +0/-3 dB |
| Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
| Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >91dB (High Output) |
| Signal-to-Noise (Mono Mode) |
>94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
| Dynamic Range |
> 106 dB, unweighted, any output |
| THD+Noise |
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
| Interchannel Crosstalk |
< -80 dB, 20 Hz to 20 kHz |
| Crossover Frequencies (Stereo Mode) |
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| Crossover Frequencies (Mono Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
| Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
| Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
| x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
| Mode Switch |
Selects stereo/mono and 2/3-way operation |
| LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
| Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
| Operating Voltage |
100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
| Operating Temperature |
32°F to 113°F (0°C to 45°C) |
| Power Consumption |
15W |
| Power Connector |
IEC receptacle |
| Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
| Unit Weight |
3.7 lbs. (1.7 kg) |
| Shipping Weight |
5.4 lbs. (2.5 kg) |
|
The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Features - Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
- Digital Outputs (AES/EBU and S/PDIF)
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
- Clear Front Panel LED Indication
- Informative Front Panel Display
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO Integration
- Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet London Architect
|
Reviews
There are no reviews yet.