BEHRINGER DJX900 usb Pro Mixer 5-Channel DJ Mixer

A fully featured but compact and clearly designed 5 channel console to offer the most versatile mixing unit to installers and mobile P.A. Adapted to a very wide range of purposes such as Bars, Disco-bars, Religious Centres, Retail shops, Fitness rooms, Education Centres, Meeting rooms, Mobile P.A. rental etc… where space is limited and users are non-technical people.

• Versatile laptop and rack format design (3u. high / 19” rack).
• 5 channels, 8 LINE Inputs, 3 MIC Inputs, 2 PHONO Inputs.
• 2 independent MASTER (1x XLR / 1x RCA) and REC output.
• 3 band equalizer per channel.
• PFL monitoring. Talkover. Phantom power.
• 45mm ECLER faders per channel.

• Type Analog
• Channels 4 + 1
• EQ 3-band / Total Kill (CH 1-4 + CH A)
• USB Soundcard 20 Channel (10 in / 10 out)
  USB2 / Class Compliant
  24bit / 96kHz
  1 x MIDI IN
  1 x MIDI Out
• Line Inputs 4 x RCA (CH 1-4)
  1 x 1/4″ TRS (CH A) Mono/Stereo
• Phono Inputs 4 x RCA (CH 1-4)
  LN/PH Switch for DVS
• USB Inputs 5 x USB (CH 1-4 + CH A)
• Mic Input 1 x XLR
• Master Output 1 x XLR (Balanced)
• Master 2 Output 1 x RCA (Un-balanced)
• Booth Output 1 x 1/4″ TRS
• Record Output 1 x RCA (Un-balanced)
• Master Insert 1 x 1/4″ TRS
• MIDI Sync/Out 1 x 5-Pin DIN
  DIN Offset Control
• Send/Return I/O
  1 x 1/4″ TRS Send
  1 x 1/4″ TRS Return
  1 x LN/Hi-Z Switch

• Internal Xone:FX Yes
• Hybrid FX Mode Yes (Internal External)
• FX Send 1 x Pre/Post Selectable (CH 1-4 + CH A)
• Filter
  1 x VCF Filter
  HPF / BPF / LPF
  Adjustable Frequency & Resonance
  Assignable CH 1-4 + CH A + External Return
• X-Link 1 x RJ45
• Headphones
  1 x 1/4″
  1 x 3.5mm
  Split Cue Monitoring
• Channel Faders 60mm VCA / Replaceable
• Chanel Meters 12 Segment LED
• Channel Fader Curve 3 Types
• X-Fader 45mm VCA / Replaceable / Innofader Compatible
• X-Fader Curve Settings 3 Types
• MIDI Clock Send + Receive
  Start / Stop / Pause / Tempo Bend (-/+)
• MIDI Assignable Yes (MIDI CC / MIDI Notes)
• BPM Detection Auto / Manual / Tap Tempo
• Earth Ground Terminals x 2
• Headroom 20dB
• AC Mains
  100 to 240V
  AC 50/60Hz
  Consumption 35W max
• Mains Adaptor 3 pin IEC socket with cable clamp
• Fuse Rating 250V AC T1AL 20mm
• Height 4.3″
• Width 12.6″
• Depth 14.8″
• Weight 11.5 lbs.

The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.

The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.

Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.

The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.

Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.

Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.

Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.

With 2 band EQ, gain, cue and mix level and with full access to FX.

The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.

DB2's lightweight aluminium chassis is designed to make touring with the console easy.

The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.

All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.

X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.

Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade  uses 100% conductive plastic  tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.