BEHRINGER EPQ2000 EUROPOWER STEREO AMPLIFIER 2Χ500W 8Ω 2x700W 4Ω

No longer available!

343.20 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Product Features: 2 x 1,000 Watts into 4 Ohms; 2 x 600 Watts into 8 Ohms ATR (Accelerated Transient Response) technology for ultimate punch and clarity Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Switchable limiters offer maximum output level with reliable overload protection Detented […]

 

Read more

Product Features:

  • 2 x 1,000 Watts into 4 Ohms; 2 x 600 Watts into 8 Ohms
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
  • Switchable limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise setting and matching of sensitivity
  • Precise Power, Signal and Limit LEDs to monitor performance
  • XLR, 1/4″ TRS and RCA input connectors for compatibility with any source
  • Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
  • Built-in Subwoofer/Satellite crossover for more flexibility
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • “Back-to-front” ventilation system including air filter for reliable operation
  • “Built-like-a-tank“, impact-resistant and all-steel 2U rackmount chassis
  • Minimum depth chassis (10.1″ / 257 mm) and ultra-light weight design (15.4 lbs / 7.0 kg), fits into compact, inexpensive effects racks
  • High-quality components and exceptionally rugged construction ensure long life
Weight 6.70 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER EPQ2000 EUROPOWER STEREO AMPLIFIER 2Χ500W 8Ω 2x700W 4Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER EPQ2000 EUROPOWER STEREO AMPLIFIER 2Χ500W 8Ω 2x700W 4Ω removeLD Systems LDSP1K8 Professional Power Amplifier 2 x 880 W 2 Ohm removeDYNACORD SL-2400 / 230V Power Amplifier 2400 Watts removeAMERICAN AUDIO VLP-1500 Power Amplifier 2x750 Watts removeDYNACORD SL-1800 Powered Amplifier 1800 Watts removeCROWN CTS-1200 TwoChannel Power Amplifier remove
NameBEHRINGER EPQ2000 EUROPOWER STEREO AMPLIFIER 2Χ500W 8Ω 2x700W 4Ω removeLD Systems LDSP1K8 Professional Power Amplifier 2 x 880 W 2 Ohm removeDYNACORD SL-2400 / 230V Power Amplifier 2400 Watts removeAMERICAN AUDIO VLP-1500 Power Amplifier 2x750 Watts removeDYNACORD SL-1800 Powered Amplifier 1800 Watts removeCROWN CTS-1200 TwoChannel Power Amplifier remove
Image
SKUEPQ2000LDSP1K8E009262E002745E009275CTS-1200
Rating
Price343.20 incl. GR VAT 1,727.50 incl. GR VAT 1,245.00 incl. GR VAT 627.00 incl. GR VAT 1,000.00 incl. GR VAT 1,257.25 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 5 left in stock

Available on backorder

In stock

In stock

AvailabilityOut of stockAvailable on backorderOnly 5 left in stockAvailable on backorderIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Product Features:

  • 2 x 1,000 Watts into 4 Ohms; 2 x 600 Watts into 8 Ohms
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
  • Switchable limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise setting and matching of sensitivity
  • Precise Power, Signal and Limit LEDs to monitor performance
  • XLR, 1/4" TRS and RCA input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
  • Built-in Subwoofer/Satellite crossover for more flexibility
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • “Back-to-front" ventilation system including air filter for reliable operation
  • “Built-like-a-tank“, impact-resistant and all-steel 2U rackmount chassis
  • Minimum depth chassis (10.1" / 257 mm) and ultra-light weight design (15.4 lbs / 7.0 kg), fits into compact, inexpensive effects racks
  • High-quality components and exceptionally rugged construction ensure long life

The new LD Premium Audio CLASS-H SMPS amplifiers distils all the features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the LD Premium amps, you'll find four 2-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.

  • Model Name: SP1K8
  • Output Power 1 kHz, 500
  • Crosstalk (20 Hz - 20 kHz): > 75 dB
  • Voltage Gain (selectable): 26/32/38 dB
  • Input Sensitivity: 2.6/1.3/0.6 V
  • Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICLTM, PMSTM, SSPTM
  • Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
  • Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
  • Connectors:
    • Input: 2 x XLR
    • Line Output: 2 x XLR
    • Speaker Output: 2 x Speakon
  • Power Supply: 230 V - 50 Hz
  • Dimensions (WxHxD): 483 × 88.9 × 310 mm / 19 × 3.5 ×12.2 inches
Solid DYNACORD amplifier technology at highly competitive prices. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers. Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1800 W, 4 Ω - 1200 W, 8 Ω - 750 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 3400 W, 4 Ω - 1800 W, 8 Ω - 950 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 3600 W, 8 Ω - 2400 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 17.7 kg (39.0 lbs)VLP Series Power Amplifier Output Power: 750W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 500W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 1500W RMS @ 8 Ohms, 1K Hz, 1% THD Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms) Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz Slew Rate: 15V Per usec Damping Factor @ 8 Ohm: 300 Impedance: 20 Ohms balanced / 10 Ohms unbalanced Cooling System: 2 indivdual fans Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter Dimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spaces Weight: 42 lbs. / 19 Kgs. Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; LimiterSolid DYNACORD amplifier technology at highly competitive prices. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers. Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1250 W, 4 Ω - 900 W, 8 Ω - 550 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 2450 W, 4 Ω - 1400 W, 8 Ω - 700 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 2800 W, 8 Ω - 1800 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +5.1 dBu (1.39 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 16.3 kg (35.9 lbs)

Crownʼs new CTs series of power amplifiers are remarkable for their loud, punchy sound; sustained, tight bass; and superior protection against overheating and overload. This paper explains the design features behind those advantages. After reading this information, youʼll know why Crown CTs amps sound better than the competition. CTs amplifiers can provide large amounts of power into various loads, such as 2, 4, 8 ohms and 70V. With most power amps, the maximum output power tends to drop as the load impedance increases. But with the CTs series, the power stays the same at almost any impedance. 2-ohm Dual (per Ch.) 250W 4-ohm Dual (per Ch.) 600W 8-ohm Dual (per Ch.) 600W 16-ohm Dual (per Ch.) 300W 70V Dual (per Ch.) 600W 4-ohm Bridge 500W 8-ohm Bridge 1200W 16-ohm Bridge 1200W 140V Bridge 1200W Crown switching power supply for less weight Sustained Power on long-duration signals due to regulated, "stiff” power supplies with incredible energy storage (huge filter capacitors). Extra Hidden Power during high-level transients and during incomplete use of all the channels. Overheating and overload protection thanks to the sophisticated TLC circuitry which compresses the signal only when needed. Compression is controlled not by temperature, but by signal voltage. This keeps the loudness up during compression more than with competitive amps.

Weight6.70 kg8.00 kg17.70 kg19.00 kg16.30 kg11.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.70 kg
Weight 8.00 kg
Weight 17.70 kg
Weight 19.00 kg
Weight 16.30 kg
Weight 11.00 kg