Content | Converts to DC 9 V for use with virtually all stomp boxes and effects pedals
Typical DC-type 2.2 mm plug with negative tip and positive sleeve
Provides a generous 1000 mA current to power even digital products
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Use our new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.
This adapter provides a generous 100 mA current to power even digital products. For connection, it features a typical DC-type 2.2 mm plug with negative tip and positive sleeve.
This universal power supply gives you ultimate power for your most demanding gigs
Features: Converts to DC 9 V for use with virtually all stomp boxes and effects pedals Typical DC-type 2.2 mm plug with negative tip and positive sleeve Provides a generous 1000 mA current to power even digital products suitable for: CO600, UW300, XD300, CL9, OD400, SM400, UV300 und UZ400
- Power Adapter
- 100-240V AC, 50-60Hz
- 9V DC
- 1000mA
- Sleeve: Positive, Tip: Negative
- Behringer Guitar Pedals
- 2.2mm Barrel
Compatible with modelas Boss PAS120S, PSA120ZS.
Please note this is a European power supply. |
User\'s manual
Palmer MI PWT 05 MK 2 Universal 9V Pedalboard Power Supply 5 Outputs
- Universal 9 volt DC power supply
- 5 outlets with ultra stable 250 mA each
- Isolated
- Overload protection
- Roadworthy enclosure
- Mounting and strain relief options
- Power, merge and daisy chain cables included
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.
The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V.. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
Product type
Power Supplies
Mains connector
IEC socket
Input voltage
230 V
Outputs
5
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Overload , Power
Controls
mains switch (on/off) , voltage selector switch
Width
105 mm
Depth
140 mm
Height
45 mm
Weight
1,5 kg
|
Specifications
- 18V Power Supply
-
18VDC @ 150mA 5% regulated
Supported Pedal
- Crybaby Multi-wah
- SW-95 Slash Wah
- DD11 Dime Distortion
- M108 10-band EQ
- KFK1 10-band EQ
- M134 Chorus
- M117R Flanger
- EVH 117 Flanger
- M181 Bass Blowtorch.
|
FOR X-S, Xio, all ReMOTEs, Bass St. KB/Rack, D-. A-, K-St
|
The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltage, and 1100mA output current.
The main features of the Korg KA189 Power Supply include:
- Suitable for: microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron
- Voltage: DC
- Output Current: 1100 mA
- Output Voltage: 9V
| User\'s manual
Palmer MI PWT 04
Universal Pedalboard Power Supply 4-Outputs
- Fully regulated universal pedalboard power supply
- 4 standard centre negative outputs with 1,000 mA output total
- Short circuit and overload protection for each outlet
- DC cables and mains adapter included
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
4
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Power
Width
80 mm
Depth
90 mm
Height
25 mm
Weight
0,12 kg
Accessories (included)
4 x DC cable |
Reviews
There are no reviews yet.