BEHRINGER HA4700 Professional High-Power 4-Channel Headphones Amplifier System

No longer available!

140.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Behringer HA-4700 Professional High-Power 4-Channel Headphones Amplifier System An articulate headphone mix can make a tremendous difference to the outcome of a recording session. The 4-channel BEHRINGER HA4700 features superior performance, routing and mixing functions to accommodate the most discerning set of ears. When a conditioned mix has to reach multiple listeners, the HA4700 delivers […]

 

Read more

Behringer HA-4700 Professional High-Power 4-Channel Headphones Amplifier System

An articulate headphone mix can make a tremendous difference to the outcome of a recording session. The 4-channel BEHRINGER HA4700 features superior performance, routing and mixing functions to accommodate the most discerning set of ears. When a conditioned mix has to reach multiple listeners, the HA4700 delivers in style.

 

The HA4700 offers 4 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier features its own two-band EQ, 8-digit LED output meter, left and right Mute switches, a ST./2-CH switch to toggle between stereo or double mono, and a 1/4″ stereo AUX input to mix in any instrument or sound source. The front panel gives you one Phones Out 1/4″ jack per channel. A Main section features a 5-segment LED output meter, Direct In 1/4″ jack and Master Level dial.

 

Connections
On the back panel you’ll find two additional ¼ ” outputs per channel. That means up to 12 pairs of headphones can listen to 4 separate mixes at once. The back panel also features stereo ¼ ” and XLR Inputs and Outputs, so you can connect multiple HA4700 units for even greater listening capacity. Meanwhile, the HA4700‘s ultra low-noise 4580 operational amplifiers deliver the audiophile-grade audio performance. 

Great Sound, Great Value
When a recording session calls for everyone’s heads and ears to be in the game, the POWERPLAY HA4700 is essential. With 4 discrete channels and the ability to connect up to a dozen sets of cans, this is one tool you will use every day. As they say, “hearing is believing”, so check out the amazing HA4700 at a BEHRINGER dealer, or order yours online today!

Weight 2.30 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER HA4700 Professional High-Power 4-Channel Headphones Amplifier System”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER HA4700 Professional High-Power 4-Channel Headphones Amplifier System removePALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removePalmer Pro MONICON W - Passive Monitor Controller white Limited Edition removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removePALMER AUDIO MONICON L - Passive Monitor Controller remove
NameBEHRINGER HA4700 Professional High-Power 4-Channel Headphones Amplifier System removePALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removePalmer Pro MONICON W - Passive Monitor Controller white Limited Edition removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removePALMER AUDIO MONICON L - Passive Monitor Controller remove
Image
SKUE005299PHDA02PMONICONWAT/EM/000036VM-50HPMONICONL
Rating
Price140.00 incl. GR VAT 353.91 incl. GR VAT 75.00 incl. GR VAT 97.00 incl. GR VAT 264.66 incl. GR VAT 168.43 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 2 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Behringer HA-4700 Professional High-Power 4-Channel Headphones Amplifier System

An articulate headphone mix can make a tremendous difference to the outcome of a recording session. The 4-channel BEHRINGER HA4700 features superior performance, routing and mixing functions to accommodate the most discerning set of ears. When a conditioned mix has to reach multiple listeners, the HA4700 delivers in style.

 

The HA4700 offers 4 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier features its own two-band EQ, 8-digit LED output meter, left and right Mute switches, a ST./2-CH switch to toggle between stereo or double mono, and a 1/4" stereo AUX input to mix in any instrument or sound source. The front panel gives you one Phones Out 1/4" jack per channel. A Main section features a 5-segment LED output meter, Direct In 1/4" jack and Master Level dial.

  Connections On the back panel you’ll find two additional ¼ " outputs per channel. That means up to 12 pairs of headphones can listen to 4 separate mixes at once. The back panel also features stereo ¼ " and XLR Inputs and Outputs, so you can connect multiple HA4700 units for even greater listening capacity. Meanwhile, the HA4700‘s ultra low-noise 4580 operational amplifiers deliver the audiophile-grade audio performance.  Great Sound, Great Value When a recording session calls for everyone’s heads and ears to be in the game, the POWERPLAY HA4700 is essential. With 4 discrete channels and the ability to connect up to a dozen sets of cans, this is one tool you will use every day. As they say, "hearing is believing”, so check out the amazing HA4700 at a BEHRINGER dealer, or order yours online today!

The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

 

 

Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

INPUT:    1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS:    5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB):    25kHz.
CONTROL:    5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE:    -60dB to +10dB.
S/N RATIO:    78dB.
THD:    0.08% @100mW.
POWER SOURCE:    12V DC, 370mA nom, 1A max.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT:    0.68kg (1.5lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19" rack adapter.

  • All-passive volume control circuit
  • Stereo and AUX inputs
  • Dual outputs
  • Additional mono output
  • Balanced and unbalanced connection
  • Integrated high quality headphone amplifier
  • Mono, mute and PFL switches
  • Stereo volume, AUX and headphone level controls
  • Elegant design with solid wood side panels
  • Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply. Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation. Product type Other Studio and Recording Equipment
Channels 2
Inputs 2
Input connectors 3.5 mm TRS , RCA , XLR
Input type balanced/unbalanced (depending on TS/TRS connection)
Max. input level 20 dBu
Input impedance (balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs 3
Output connectors XLR
Output type balanced/unbalanced (depending on TS/TRS connection)
Max. output level 20 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 40000 Hz
THD 0.001 %
Max. attenuation (Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material sheet steel , wood
Cabinet surface Powder coated
Width 218 mm
Height 77 mm
Depth 100 mm
Weight 1,14 kg
Weight2.30 kg1.58 kg0.75 kg0.59 kg0.68 kg1.14 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.30 kg
Weight 1.58 kg
Weight 0.75 kg
Weight 0.59 kg
Weight 0.68 kg
Weight 1.14 kg