BEHRINGER MIC2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box

166.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: E005316 Category:
Behringer MIC-2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box The MIC2200 is the ideal extension to your console, MIDI setup or hard disk recording system. Its integrated parametric EQ?s give you extra sound-shaping power, while its built-in tube adds warmth and transparency to your signal. In addition, the ULTRAGAIN PRO features direct injection and level conversion […]

 

Read more

Behringer MIC-2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box

The MIC2200 is the ideal extension to your console, MIDI setup or hard disk recording system. Its integrated parametric EQ?s give you extra sound-shaping power, while its built-in tube adds warmth and transparency to your signal. In addition, the ULTRAGAIN PRO features direct injection and level conversion functionality.

Weight 4.20 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER MIC2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER MIC2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box removeGOLDEN AGE PRE573 Microphone preamp removeDAP AUDIO D1535 ASC-202 2 Way Stereo Converter removeBEHRINGER ADA8200 Microphone preamplifier removeEWI PDI-100 Para Acoustic DI Box PREAMP TONE CONTROL removeSOUND DEVICES MM-1 Portable Mic Preamp with Headphone Monitor remove
NameBEHRINGER MIC2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box removeGOLDEN AGE PRE573 Microphone preamp removeDAP AUDIO D1535 ASC-202 2 Way Stereo Converter removeBEHRINGER ADA8200 Microphone preamplifier removeEWI PDI-100 Para Acoustic DI Box PREAMP TONE CONTROL removeSOUND DEVICES MM-1 Portable Mic Preamp with Headphone Monitor remove
Image
SKUE005316PRE-573D1535E005873PDI-100MM-1 SD
Rating
Price 166.00 incl. GR VAT297.39 incl. GR VAT 66.95 incl. GR VAT 248.00 incl. GR VAT 130.19 incl. GR VAT 695.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 3 left in stock

Only 1 left in stock (can be backordered)

Only 4 left in stock

In stock

AvailabilityAvailable on backorderAvailable on backorderOnly 3 left in stockOnly 1 left in stock (can be backordered)Only 4 left in stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Behringer MIC-2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box

The MIC2200 is the ideal extension to your console, MIDI setup or hard disk recording system. Its integrated parametric EQ?s give you extra sound-shaping power, while its built-in tube adds warmth and transparency to your signal. In addition, the ULTRAGAIN PRO features direct injection and level conversion functionality.

Having had great success with the PRE-73 preamp, we have received many requests for a version for the 500 eries rack format. We are therefore happy to present the PRE-573, expected to start shipping in late September.
 
The PRE-573 is a one width module that has the sound and the features that made the PRE-73 so successful and a few additional ones.
The circuit still uses the preamp and output section from the classic 1073-module, adapted to work in the api rack format. It has a total  gain range from -15 to +80 dB. The 10 - 70 dB range is handled by a turn switch  and there is a separate toggle switch to select an additional 5 or 10 dB gain. The input can be configured to accept line level signals by another switch, the gain is then lowered by about 25 dB and the input impedance increased to about 15 kohm.
 
The input impedance of the mic input mode can be switched between 1200 and 300 ohm. Phantom power and phase reverse is also selectable by front panel switches.
 
An added feature, using the same circuit as in the PRE-73 DLX, is the active DI-input with a high input impedance of about 1,5 Mohm. The output signal from the active DI circuit passes through the input transformer for some extra character.
The DI-input is very flexible since it can be changed to a purely passive one by a front panel switch. The DI input is then exactly the same as in the PRE-73 Mk2 where the signal is feed directly into the second gain stage, bypassing the transformer and with an input impedance of about 100 kohm.

These two DI-options makes it possible to get different tones from electric instruments and the passive DI input mode is more suited for injecting active units like sound modules. 
 
A new feature is the switchable AIR mode that  adds a small boost above 10 kHz that peaks at 2 dB at about 35 kHz.


A simple but effective signal and overload indicator is offered by a single LED that starts glowing red at about +4 dBu and then increases its intensity up to the maximum output level.
 
The PRE-573 has a dedicated insert connector at the back allowing it to interface with other GAP 500 modules. The insert can be activated by removing a jumper connector at the back of the module.
The second Golden Age Project module for the api 500 rack will be the EQ-573, expected to ship in November 2012. The EQ-573 consists of the inductor based high pass filter section  and the 3-band eq section from the classic 1073 module with some added frequencies. These two modules together will offer a fully fledged 1073-module in a compact format at a very low cost.
 
There is a second jumper at the back of the module that selects 600 ohm termination on the output. The standard mode is termination on, since it gives the flattest response when the PRE-573 is used with modern line inputs that typically has an input impedance of 10 kohm or more. The user can chose to remove the jumper and deactivate the termination resistor, this will increase the level above 10 kHz and create a peak in the response for an even more pronounced  "Air" effect.
The output is transformer balanced and fully floating and can drive a 600 ohm load up to level of about 28 dBu.

• Road proof housing • High quality components • Professional balanced XLR outputs • Level control The ASC-202 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, has two XLR inputs and stereo RCA outputs. The other side has stereo RCA inputs and two XLR outputs. Each side has stereo level controls. A possible application of the SC-13 is to use it as a level control in balanced audio lines. The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio solutions are designed to meet the highest stage and audio demands and feature a metal road proof housing with rubber feet and easy accessible controls. The units also have a small footprint which make them ideal to be used and placed in any environment where space is critical. Specifications Frequency Response: 20Hz-20KHz Inputs: XLR/Jack Combo, RCA Outputs: XLR male, RCA Input sensitivity RCA in: -10 dBv Input Impedance RCA in: 10 kOhm Input sensitivity XLR/Jack in: +4 dBu Input Impedance XLR/Jack in: 20 kOhm Output voltage RCA Out: -10 dBV Output Impedance XLR Out: 100 Ohm Output voltage XLR Out: +4 dBu Output Impedance XLR Out: 200 Ohm Power supply: 18V AC (adapter included) Dimensions: 53 x 158 x 135 mm (HxWxD) Weight: 0,65 Kg
    • Ultra-high quality 8-channel A/D and D/A interface for virtually any digital recording/mixing environment
    • 8 state-of-the-art MIDAS designed Mic Preamplifiers
    • Phantom power on all microphone inputs
    • Reference-class Cirrus Logic 24-bit converters for ultimate signal integrity
    • Processes 48 and 44.1 kHz sample rates
    • External sample rate synchronization via word clock or ADAT input
 
  • Optical ADAT in/out interface for ultimate compatibility
  • All mic/line inputs routed to the ADAT output
  • ADAT input routed to all Line outputs
  • “Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
EWI PDI-100 PARA ACOUSTIC DI Box   This is a medium grade professional application Para Acoustic Active DI, which will work well on instruments with passive pickups or active pickups.  The construction is reasonably rugged and the components are well suited for the application yielding results that are typically acceptable for all but the most discerning artists.    The on-board tone and volume controls give the operator a lot of choices in shaping their sound prior to sending the signal to the mix console.  This allows an artist to use this device in-place of or in addition to a traditional stage amp for their instrument.  This is an excellent choice for IEM bands, or bands that like to keep their stage volume low.   This item is typically used to split the instrument signal going to a stage amp so a feed can be sent also to the mix board, or be used as a stand-alone instrument pre-amp.  It is equipped with a ¼” jack for input, a 1/4" jack for output to a stage amp, one XLR jack for the send to the board and a TRS jack for inserting an FX device.Since this is an active D.I. box, it needs to be powered which can be done either with Phantom Power from the mix board, or with the supplied internal 9v battery.  The battery is fairly easy to change by removing one screw in the bottom of the case.

Highly versatile and portable, Sound Devices' MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an "unclippable" dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC. The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control. The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.
  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable“
  • Selectable 48-volt / 12-volt phantom power or 12-volt "T" power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering (plug included)
  • High-strength aluminum chassis with durable belt clip
Weight4.20 kg3.60 kg0.65 kg3.00 kg0.50 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.20 kg
Weight 3.60 kg
Weight 0.65 kg
Weight 3.00 kg
Weight 0.50 kg
Weight 3.00 kg