Behringer MULTIGATE PRO XR4400 Quad Expander/Gate

145.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction. The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts […]

 

Read more

The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.

The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.

A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.

Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\’sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4″ TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring

Function Four channel expander/gate
Number of Channels 4
Inputs 4 x XLR, 4 x TRS 1/4″ phone
Output 4 x XLR, 4 x TRS 1/4″ phone
Maximum Input Level +21dBu
Compression Threshold Not applicable
Compression Ratio Not applicable
Attack Time Not applicable
Release Time Not applicable
Gate Threshold 0 to -80dB
Gate Rate Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable
Maximum Output Level +21dBu
Make-up Gain Not specified by manufacturer
Frequency Response 18HZ to 30kHz
Dynamic Range Not specified by manufacturer
Noise >95dBu, unweighted, 22Hz to 22kHz
Dimensions 1U rack mount, 8 1/2″ deep
Specialties Unit will operate at either +4dB or -10 dB
Weight 3.20 kg

Reviews

There are no reviews yet.

Be the first to review “Behringer MULTIGATE PRO XR4400 Quad Expander/Gate”

Your email address will not be published. Required fields are marked *

Quick Comparison

Behringer MULTIGATE PRO XR4400 Quad Expander/Gate removeBSS Z-BLU101 Signal Processor removeDBX 530 PARAMENTRIC EQ MODULE removeSirus Stereo Link 5.8 RX Wireless Digital Audio Receiver removeBEHRINGER S16 I/O Box with 16 Remote-Controllable MIDAS Preamps, 8 Outputs removeWORK WDR 24 Wireless digital audio receiver remove
NameBehringer MULTIGATE PRO XR4400 Quad Expander/Gate removeBSS Z-BLU101 Signal Processor removeDBX 530 PARAMENTRIC EQ MODULE removeSirus Stereo Link 5.8 RX Wireless Digital Audio Receiver removeBEHRINGER S16 I/O Box with 16 Remote-Controllable MIDAS Preamps, 8 Outputs removeWORK WDR 24 Wireless digital audio receiver remove
ImageSirus_Stereo_Link_5_8_rX_Wireless_Digital_Audio_Receiver_face_1
SKUE005394Z-BLU101DBX 530SI58RXE005492WDR 24
Rating
Price 145.00 incl. GR VAT 3,609.32 incl. GR VAT 346.00 incl. GR VAT 79.90 incl. GR VAT 686.00 incl. GR VAT 94.85 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.

The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.

A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.

Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring

Function Four channel expander/gate
Number of Channels 4
Inputs 4 x XLR, 4 x TRS 1/4" phone
Output 4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level +21dBu
Compression Threshold Not applicable
Compression Ratio Not applicable
Attack Time Not applicable
Release Time Not applicable
Gate Threshold 0 to -80dB
Gate Rate Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable
Maximum Output Level +21dBu
Make-up Gain Not specified by manufacturer
Frequency Response 18HZ to 30kHz
Dynamic Range Not specified by manufacturer
Noise >95dBu, unweighted, 22Hz to 22kHz
Dimensions 1U rack mount, 8 1/2" deep
Specialties Unit will operate at either +4dB or -10 dB

The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.

The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Key Features:
• 12 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• Configurable Signal Processing
• 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands! dbx has a much-heralded history with modular processors dating back to our 900 Series, and the dbx 530 continues that tradition.

The dbx 530\'s overlapping bands each offer control of frequency bandwidth (Q) and up to 15dB of reciprocal cut or boost to provide exact, complimentary filter action for the most demanding of equalization needs. For problem situations requiring the removal of spurious signals, each of the bands can be independently switched into ?infinite notch? mode without affecting the operation of others. In situations where a shelving equalizer will produce better results than a peaking one, the 530’s high and low bands can be independently switched from peaking to shelving operation. You can also make instant affected/bypassed comparisons using the 530\'s ?On? switch.

Load up your 500 Series rack with dbx 530 Parametric EQs­­ and cut your way through mixes like an audio surgeon!

Wireless 5.8 GHz Stereo Receiver

  • For wireless transmission of a stereo audio signal together with the
  • Maximum range: 30 m
  • One transmitter can be paired with up to 8 receivers
  • Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
  • Volume control
  • Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
  • Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket

Product Features:

16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
8 analog, servo-balanced XLR outputs
AES50 network ports featuring KLARK TEKNIKʼs SuperMAC networking capability for ultra-low jitter and latency
Up to 100 m networking capability via CAT-5e cable (not included)
Dual AES50 ports for cascading S16 units—no merger or router required
Precise LED metering plus 7-segment displays for signal control on stage
Phones output assignable to any of the inputs/outputs for on-stage monitoring
Connectivity for BEHRINGER's P-16 Personal Monitoring System for In-Ear applications (not included)
Dual ADAT outputs for use in splitter mode and stand-alone digital multicore applications
MIDI In/Out for bi-directional communication between FOH console and on-stage MIDI devices
USB connector for system updates via PC
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
"Built like a tank" yet compact, all-steel 2U rack-mount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

KLARK TEKNIK AES50

KLARK TEKNIK SuperMAC (AES50-Compliant) technology gives the S16 its high-capacity digital interconnectivity with ultra-low latency operation, as well as superbly simple deployment and ease of use. KLARK TEKNIK engineers worked hand-in-hand with BEHRINGER product developers to ensure the S16 meets, or exceeds, the requirements of live performance entertainers and their professional audio engineers. Some of the outstanding features are:
48 bidirectional audio channels over CAT5 cable (48 kHz)
24 bidirectional audio channels over CAT5 cable (96 kHz)
Single cable duplex interconnection for audio and sample clocks
Ethernet physical layer audio data transmission
High channel count and ultra-low deterministic latency
Accurate phase-aligned clock distribution.
Comprehensive error detection
and management
Provision for redundant networking
Minimal configuration ñ total ease of deployment and use
Ethernet TCP/IP protocol-compatible auxiliary data channel
Royalty-free implementations available as Xilinx FPGA cores
OEM modules available from developer partners

User's Manual

WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system. The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
  • Wireless Digital Audio Receiver System
  • Operating Band ISM 2.4GHz (free band).
  • One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
  • GFSK digital modulation/demodulation.
  • External antenna can help to increase the transmission distance.
  • Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
  • Automatic mute in bad channel quality conditions or high error code rate.
  • Transmission distance higher than 30 meters in open places.
  • Up to three transmitters WDT 24 in a zone
  • Balanced XLR and unbalanced ¼\'\' jack outputs
  • Working mode: stereo or mono
Power Supply AC 9V-500 mA 50/60 Hz
Frequency 2404-2476MHz
Channel 25
Modulation/Demodulation GFSK
Receive Sensitivity (WDR 24) -84dBm (min.)
Transmitted Power (WDT 24) 6 dBm
Output Level (WDR 24) +13dBu (BAL max.)
Input Level (WDT 24) +5dBu (max.)
Bandwidth >=1.8 MHz
Frequency Response 20Hz - 20kHz, +3dB / -3dB
S/N >80 dB
Dynamic Range @ 1 kHz >90 dB
Crosstalk @ 1kHz >90 dB
THD
Weight3.20 kg4.10 kg1.00 kg1.000 kg4.70 kg450.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.20 kg
Weight 4.10 kg
Weight 1.00 kg
Weight 1.000 kg
Weight 4.70 kg
Weight 450.00 kg