Converts to DC 9 V for use with virtually all stomp boxes and effects pedals Typical DC-type 2.2 mm plug with negative tip and positive sleeve Provides a generous 1000 mA current to power even digital products High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany Use our new […]
Converts to DC 9 V for use with virtually all stomp boxes and effects pedals
Typical DC-type 2.2 mm plug with negative tip and positive sleeve
Provides a generous 1000 mA current to power even digital products
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Use our new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.
This adapter provides a generous 100 mA current to power even digital products. For connection, it features a typical DC-type 2.2 mm plug with negative tip and positive sleeve.
This universal power supply gives you ultimate power for your most demanding gigs
Features: Converts to DC 9 V for use with virtually all stomp boxes and effects pedals Typical DC-type 2.2 mm plug with negative tip and positive sleeve Provides a generous 1000 mA current to power even digital products suitable for: CO600, UW300, XD300, CL9, OD400, SM400, UV300 und UZ400
Type: Power Adapter
Input Voltage Range: 100-240V AC, 50-60Hz
Output Voltage: 9V DC
Output Amps: 1000mA
Polarity: Sleeve: Positive, Tip: Negative
Compatibility: Behringer Guitar Pedals
Connectivity: 2.2mm Barrel
Compatible with modelas Boss PAS120S, PSA120ZS.
Please note this is a European power supply.
Weight
0.30 kg
Reviews
There are no reviews yet.
Be the first to review “BEHRINGER PSU-SB Power Adapter For P1 General Purpose DC 9 V” Cancel reply
Converts to DC 9 V for use with virtually all stomp boxes and effects pedals
Typical DC-type 2.2 mm plug with negative tip and positive sleeve
Provides a generous 1000 mA current to power even digital products
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Use our new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.
This adapter provides a generous 100 mA current to power even digital products. For connection, it features a typical DC-type 2.2 mm plug with negative tip and positive sleeve.
This universal power supply gives you ultimate power for your most demanding gigs
Features: Converts to DC 9 V for use with virtually all stomp boxes and effects pedals Typical DC-type 2.2 mm plug with negative tip and positive sleeve Provides a generous 1000 mA current to power even digital products suitable for: CO600, UW300, XD300, CL9, OD400, SM400, UV300 und UZ400
Type: Power Adapter
Input Voltage Range: 100-240V AC, 50-60Hz
Output Voltage: 9V DC
Output Amps: 1000mA
Polarity: Sleeve: Positive, Tip: Negative
Compatibility: Behringer Guitar Pedals
Connectivity: 2.2mm Barrel
Compatible with modelas Boss PAS120S, PSA120ZS.
Please note this is a European power supply.
User\'s manual
Palmer MI PWT 05 MK 2 Universal 9V Pedalboard Power Supply 5 Outputs
Universal 9 volt DC power supply
5 outlets with ultra stable 250 mA each
Isolated
Overload protection
Roadworthy enclosure
Mounting and strain relief options
Power, merge and daisy chain cables included
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.
The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V.. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
Product type
Power Supplies
Mains connector
IEC socket
Input voltage
230 V
Outputs
5
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Overload , Power
Controls
mains switch (on/off) , voltage selector switch
Width
105 mm
Depth
140 mm
Height
45 mm
Weight
1,5 kg
The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltage, and 1100mA output current.
The main features of the Korg KA189 Power Supply include:
The Electro-Harmonix 9.6DC-200 Adaptor is the player's choice of battery eliminator.
User\'s manual
Palmer MI PWT 12 MK 2
Universal 12-Outlet Pedalboard Power Supply
Fully regulated universal pedalboard power supply
12 standard centre negative outlets with 2,000 mA output total
8 x 9 V outlets (300 mA each)
4 variable voltage outlets 6 to 18 V (500 mA each)
Short circuit and overload protection for each outlet
DC cables and mains adapter included
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 isolated 9 V DC, centre-negative female pin-connector outputs. Four of the outputs feature adjustable voltage from 6 to 18 volts. The variable outputs enable the simulation of voltage drop or \'battery sag\' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
12
Output connectors
2.1 x 5.5 mm
Output voltage
12 V , 18 V , 9 V
Max. output current
2000 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
fault , Power
Controls
Output voltage selector
Width
193 mm
Depth
70 mm
Height
30 mm
Weight
0,4 kg
Universal Effects Pedal Floor Board with 9 V DC Power Supply and Patch Cables Ultra-compact and lightweight pedal board for transporting up to 6 effects pedals, including patch cables Generous 1.7 A power adapter included for powering more than 12 devices*—includes 1 x 6 daisy-chain cabling Ultra-rigid plastic design withstands even heavy impact High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
When effects are an integral part of your rig, their power adapters and patch cables can often be the most vulnerable part, and the most likely to sabotage your set if they're not pampered. Rather than tossing your pedals, power adapters and all other cabling into a duffel bag after a gig, keep them safe—and ready to rock at a momentʼs notice—with the PB600. It's All About Connections This awesome pedal board makes hooking up six 2.5" x 4.5" pedals as easy as hooking up just one (of course, if youʼre using pedals that arenʼt 2.5" x 4.5“, the snug foam padding can be cut to accommodate pedals of varying shapes). The PB600 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when youʼre transporting them. It also comes with 1 x 6 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when youʼre dealing with a ratʼs nest of loose cabling, but with the PB600, your effects chain is always safe and organized.
When itʼs time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB600 and slide the locking latches back into place. The heavyimpact plastic casing will protect your pedals from the very worst dings, scrapes and scratches the road throws your way.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.