| Content |
- Universal phantom power supply for any condenser microphone
- Selectable +12 / +48 V power supply
- Ultra-low noise audio performance
- DC 12 V adapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
Studio-grade condenser microphones really sound great for capturing vocals, drums and other acoustic instruments, but what if your mixer doesnʼt provide the phantom power you need to make them work their magic! The ultra-compact MICROPOWER PS400 can solve all of that, and it's small enough to fit in your pocket – with a price tag to match!
The PS400 features XLR Thru jacks and provides superb noise-free operation. Just connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. You can toggle between +12 V and +48 V power, depending on the operating voltage your mic prefers. This handy, little audio solution comes with its own 12 V DC power supply and an LED, to let you know when itʼs own on.
With its small size and even smaller price tag, the MICROPOWER PS400 is the perfect solution for on-the-go +12 or +48 V phantom power. See how it complements your favorite mic and mixer at your nearest BEHRINGER dealer, or get yours online today! |
The K6 powering module is the heart of this Sennheiser professional modular
microphone system and can be powered either by its internal 'AA' size 1.5 V
battery or by 12 - 48 V phantom power. The K6 can be combined with different
condenser microphone heads to provide a wide variety of polar patterns. Matt
black, anodised scratch-resistant finish.
Profile
Powering module for battery/phantom powering with switchable roll-off filter, battery
on/off switch with battery test. Suitable for ME 62 - ME 67 microphone heads and
-60 versions of MKE microphones.Transmission factor 0 dB at 1 kHz, nominal
impedance 200 Ohm, min. terminating impedance 1 kOhm, max. output voltage 2 V
(at 1 kHz), power supply: phantom powering 12 - 48 V or 1.5 V (AA size)alkaline
battery, supply current 2.2 mA, battery life approx. 150 h, dimensions in mm:
? 22 x 155, resultant length 94 mm, weight approx. 45 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6 powering module
1 MZQ 200 microphone clamp
1 AA battery
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm
Min. terminating impedance 1000 Ohm
Output voltage 2 V
Power supply Phantom 12 - 48 V 1x Typ IEC LR 06
Current consumption 2,2 mA
Operating time (Battery) max. 150 h
Dimensions d 22 x 94 mm (netto)
Weight ca. 45 g
Gain 0 dB
|
The Radial SB-48 is a high performance phantom power generator that employs a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. The stereo design features XLR inputs and outputs with a choice of 48V and 12V operation. The SB-48 is powered by a single 15VDC 400 milliamp supply that is included. The connector may be locked into place using a retention clamp. As with all Radial products, the SB-48 is manufactured in Canada from solid steel and powder coated for years of great looks! |
The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have unbalanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard
| Adapter bolt for loudspeaker flanges with ø 36 mm. Used to screw into mounting bracket M20. The material is galvanized steel.
Specifications
| Height: |
50 mm |
| Material: |
steel |
| Tube end(s): |
diameter 35 mm, threaded bolt M20 |
| Type: |
zinc-plated |
| Weight: |
0.4 kg |
|
- 2 channels
- 2 XLR inputs
- 2 XLR outputs
- Switch for +12 V or +48 V
- Including power supply
|
Reviews
There are no reviews yet.