BEHRINGER SRC-2496 ULTRAMATCH PRO Audiophile 24-Bit/96 kHz A-D – D-A and Sample Rate Converter

Product Features:

• High-end 24-bit/96 kHz A/D and D/A converter for ultimate signal integrity
• Converts any sample rate between 31 and 100 kHz into 32, 44.1, 48, 88.2 or 96 kHz sample rates
• Flexible format conversion between AES/EBU and S/PDIF (coaxial or optical)
• Universal sample rate synchronization via wordclock or digital input
• Allows parallel A/D and D/A conversion at identical sample rate
• Precise metering for input/output signal and headphone monitoring
• Allows direct manipulation of emphasis bits and other significant, digitally transmitted information in order to record virtually any audio signal
• High-precision quartz clock generator removes jitter and corrects off-tune, incorrect sample rates
• Extremely fast tracking supports varispeed applications
• Self-adjusting anti-aliasing filter with exceptionally steep edge
• All 3 outputs (XLR, RCA, Optical) simultaneously operational (splitter)
• Inputs separately selectable (patchbay functionality)
• High-quality components and exceptionally rugged construction ensure long life

Input MADI: 1 x BNC, 1 x optical
Output MADI: 1 x BNC, 1 x optical
Input ADAT optical: 8 x TOSLINK, 24-Bit, Bitclock PLL
Output ADAT optical: 8 x TOSLINK, 24-Bit
Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination
Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
MIDI input and output: via two 5-pin DIN jacks
Sync sources: MADI, ADAT optical, word clock, internal
Varipitch: by input signal or word clock
Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)
Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz-105 kHz, ADAT: 33 kHz - 57 kHz
Jitter: Internal clock Jitter suppression on external clock: circa 30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems
Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 10 Watts
Dimensions: 483 x 44 x 200 mm

The DA-16X features a redesigned power supply, standard 192kHz sampling rates,
the C777 clocking technology found in Big Ben, and optional Pro Tools HD and
FireWire expansion cards. And, not only does the X-Series hardware offer unequaled,
groundbreaking technology but it makes it available at a fraction of the cost associated
with previous, premium Apogee gear.

Features:
16 channels of premium 24-bit DA conversion
Sample rates up to 192k
16 channels of AES, ADAT/SMUX Input
Word Clock I/O
Optional HD card for direct connection to ProTools HD
Optional S800 FireWire card capable of sample rates up to 192k, compatible
with OS X/Windows XP and all popular DAW's
All option cards (X-FireWire and X-HD) facilitate connection of multiple units
Direct Digital Synthesis (DDS) using Big Ben's C777 Clock Technology up to 192kHz
Master clock capability
Adaptive Loop Filtering (ALF) for optimum clock performance and minimum jitter
Support for AES double wire and SMUX formats
Intuitive front panel calibration
Word Clock termination switch
 

The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.

Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?

• USB Bus power without using unwanted AC adapter
• Works with up to 24bit/96kHz audio source
• Exclusive PLL power supply is built in to reproduce the stable electrical supply
• High quality analog headphone amp to drive any type of headphones
• Equipped with hgih-grade AKM 32bit(*) DAC AK4390
• Condensers and OP amp designed exclusively for audio products
• USB / Digital (Optical) input selector
• Headphones / RCA (Analog) output selector
• Doubles as D/D converter from USB digital audio to Optical
• An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter

Note: When using the USB input, the sampling frequency is fixed at 96kHz.  Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.

Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)

Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)

General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g

The Rosetta 200, Apogees successor to the PSX-100 and Rosetta AD namesake,
delivers the quality of the popular Rosetta 800, in a 2-channel AD/DA solution. Like
the Rosetta 800, the 200 features premium Apogee A/D and D/A conversion, 192k
sampling rates (standard), optional Pro Tools HD, Mix and FireWire expansion cards
and core Apogee technologies such as UV22HR, and SoftLimit. And while the
Rosetta 200 shares much of its feature set with its cousin, it throws in some irresistible
extras such as the new, CODA, Audio Finishing Module, full channel metering, and
MIDI and S/PDIF input and output. Flexibility and features galore make the Rosetta 200
an outstanding option for professional and project studios, mastering engineers, and
audio archivists.

Features:
Channels of premium 24-bit AD/DA conversion
Sample rates up to 192kHz with Apogee's "Intelliclock"
2 channels of AES, S/PDIF (coax & optical), and ADAT/SMUX I/O MIDI I/O
Optional FireWire expansion card for compatibility with OS X, and
Windows XP (X-FireWire card)
Optional expansion card for direct connection to Pro Tools HD & Mix systems
(X-HD card, X-Digi-Mix card)
“Soft Limit" for maximum digital level without overs
CODA: The Aptomizer Level Normalizer, Sample Rate Conversion (SRC), and
Apogees UV22HR for superior dither to 16-bit
Full channel metering

• Stereo D/A Converter
• Supports up to 24-Bit/96 kHz Resolution
• Dante-Enabled Ethernet Input
• Balanced Analog XLR Outputs
• Adjustable Output Level
• 3.5mm Stereo Headphone Output
• 14-Gauge Steel Enclosure
• Sync and Power Indicators