| Content | The Most Affordable Audio Inputs and Outputs for Your ComputerAre you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCS202 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications.
High-Quality, Industry-Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA202 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal--1/8-inch mini-jack. Again, the Behringer UCA202 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA202.
Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA202 solves this problem by placing your sound card at the end of a USB cable run, far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution.
Super Simple SetupAs a USB device, the UCA202 is the textbook example of a plug-and-play device. Compatible with both Windows and Mac systems, the UCA202 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA202 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware.
The applications for the Behringer UCA202 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA202 is just about the easiest way to add a professional audio interface to your computer.
The UCA202 is PC and Mac-compatible. Therefore, no installation procedure or drivers are required for the correct functioning of the UCA202.
Minimum Requirements Windows
Intel or AMD CPU, 400MHz or higher
Minimum 128MB RAM
USB 1.1 interface
WIndows XP, 2000
Minimum Requirements Macintosh
G3, 300MHz or higher
Minimum 128MB RAM
USB 1.1 interface |
Mbox® is a premium audio interface, packing a wide range of analog and digital I/O connections into a mobile form factor.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* Bus-powered USB 2.0 connection for maximum mobility
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 96 kHz sample rates
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Hardware configuration:
o 4 x 4 simultaneous channels of I/O
o 2 XLR mic/line combo inputs with 48 V phantom power
o 2 1/4” DI inputs on front panel for easy access
o 2 balanced 1/4” monitor outputs
o 1 1/4” stereo headphone output with volume control
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Monitor control section with Mono and Dim controls
o Dedicated monitor volume knob
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools® software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One USB port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One USB port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers ![]( "MBOX")
|
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One FireWire port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One FireWire port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers
Mbox Pro Hardware
Pro Tools Mbox Pro
Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* FireWire connection
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 192 kHz sample rates*
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Connect up to three pairs of monitors or do 5.1 surround mixing**
* Hardware configuration:
o 8 x 8 simultaneous channels of I/O
o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
o 4 1/4" TRS line inputs
o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
o 6 1/4" TRS balanced line outputs
o 2 discrete 1/4” stereo headphone outputs with separate volume controls
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Word clock I/O
o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
o Dedicated monitor volume knob
* Up to 96 kHz sample rates supported with Pro Tools LE software.
** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
|
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
![]() | ![]() | ![]() | 8 channels of premium 24-bit 192K AD/DA conversion | | | ![]() | ![]() | 4 digitally controlled 75db microphone preamps | | | ![]() | ![]() | 2 fully balanced inserts on mic pre channels | | | ![]() | ![]() | 4 Hi-Z instrument inputs capable of handling high level instruments | | | ![]() | ![]() | 2 individual, controllable and assignable high level headphone outputs | | | ![]() | ![]() | 2, 6 or 8 channel monitor outputs | | | | ![]() | 8 channels of ADAT I/O | | | | ![]() | FireWire 400 I/O, compatible with OS X Core Audio (no driver required) | | | | ![]() | 2 channels of SPDIF I/O | | | | ![]() | “Soft Limit” for maximum digital input level without overs | | | | ![]() | “UV22HR” for superior dither of 24 bit resolution down to 16-bit | | | | ![]() | Advanced, dual-stage "Intelliclock” | | | | ![]() | Complete integration and control with Appleʼs Logic Pro Software | | | | ![]() | Compatibility with any CoreAudio software applications | | | | ![]() | Apogeeʼs Maestro Software for advanced control and routing outside of Logic Pro |
|
Reviews
There are no reviews yet.